What is the function of plastering the exterior wall of a self built house in the countryside and na

Whether the exterior walls of self-built houses in rural areas need to be hung with steel wire mesh depends on a number of factors.

1.Wall material: If you're using a sturdy material such as brick, concrete, etc., to build your façade, you usually don't need to hang wire mesh. This is because these materials themselves have sufficient strength and stability to support the wall structure.

2.Geography: If your house is located on higher ground and is at higher risk of being exposed to natural disasters such as strong winds, sandstorms, etc., then hanging wire mesh can increase the stability and wind resistance of the wall, providing additional protection.

3.Wall height: If you plan to build a tall wall, hanging wire mesh can increase the stability of the wall and prevent it from cracking or tilting.

4.Building requirements: In some areas, steel wire mesh may be hung on the exterior walls of self-built houses in accordance with building regulations and safety standards to ensure construction quality and safety.

5.Cost and feasibility: Hanging wire mesh will increase the cost of construction, and your budget and feasibility need to be considered. If your home is structurally solid enough and the location is relatively good, you may not need to hang wire mesh.

This can not only ensure that the wall will not fall off easily, but also play a role in reinforcing the building, which is a very good external wall reinforcement method.

This method is to make the cement more firm, but also conducive to the later decoration, so that the whole wall is more flat, for the whole house, this is an advantage, will make the decoration of the whole room easier.

Rural areas build their own houses, paint the exterior walls, and lay the net before wiping, which is to paint the cement exterior wall and lay the wire net in advance, which is actually equivalent to the steel bar in the concrete. In fact, when painting exterior walls in rural areas, there are not many barbed wire fences. Nail the nails.

It doesn't mean that the whole wall can be nailed. When cities build buildings, they nail barbed wire more often. Moreover, its intention, simply put, is to prevent cracks.

Due to the different degrees of thermal expansion and cold shrinkage of concrete and brick, as well as the different degrees of column windows and shrinkage, if you do not put this layer, the outer wall that comes into contact with it in the later stage is easy to crack, and it is easy to seep water if there are cracks. Inlaid with barbed wire on the exterior wall, then apply cement, the cement can enter the barbed wire, have a certain supporting force, make the cement more solid, and it is more economical to coat cement on the exterior wall.

Another advantage is that it can cover the cracks in the walls and does not affect the appearance of the house. Eventually, the façade and the barbed wire plaster wall consisted of two parts that were not actually fused. Of course, in order to save money, instead of barbed wire, the method of hanging fiberglass mesh on the exterior wall can also have the same effect.

However, we should be careful that before painting the walls, sprinkle them with water according to the material we use to build them to keep them hydrated. If you don't know how to adjust the sprinkler head, just hold on for a while and let the wall get wet, but you can't see the water running down yet. The depth of drinking water on the wall should be more than 3 cm, and when wiping the second batch of ash, the first batch of ash must already have the necessary strength, and if the barbed wire is hung, there will be no cracks!

Mortar on the surface of a brick wall can be taken in two ways. Paint in person, do not hang the net, and paint after hanging the net. However, this means that where the brick wall comes into contact with the concrete wall, i.e. where the wall of different materials meets, it is necessary to hang barbed wire stucco.

So the exterior walls of this issue are all equipped with barbed wire, and my personal opinion is the way to paint the walls full of barbed wire. This method of applying mortar is more reliable than applying plaster with a local net. After the plaster is applied, the probability of cracking will be lower, and the quality of the mortar will be higher.

Personally, it is not recommended to use this method of thin mortar application. Second, we need to be careful to keep the walls hydrated by sprinkling water according to the material we are using to build the walls before painting them. If you don't know how to adjust the sprinkler head, stick to the walls to be wet.

But it is possible that the water has not yet flowed down.

There is no need to hang barbed wire. Because it is illegal to hang barbed wire without permission, it may harm other people.

I think that although it is said to be your own house, it is better not to hang it as a wire mesh on the exterior wall, which is very dangerous, after all, some children in the countryside are particularly playful, and it is easy to cause harm to them.

If it is a self-built house in the countryside, it is not too important to hang barbed wire, I personally think that it is better to hang it, because hanging barbed wire still has a certain effect on anti-theft. However, in this era, there were not many thieves who would steal from the countryside.

No, because after installing such a steel wire mesh, it is easy to cause others to be scratched, and then they also need to be compensated for their medical expenses.

Wipe the exterior wall of a rural self-built house, and nail a layer of net before wiping, indicating that it is a cement exterior wall. Nailing a layer of reinforcement mesh in advance is actually equivalent to the reinforcement in concrete. In the past, there were two main materials for plastering walls in rural areas, the inner walls were grass and mud walls, and the outer walls were lime walls.

Grass mud is yellow mud plus wheat straw, in which wheat straw plays the role of connecting yellow mud, which can achieve the effect of no cracking and no residual soil; In the same way, the lime should be mixed with hemp, and the wheat straw in the yellow mud is also used to connect to prevent the lime from falling off and cracking.

In rural areas, the exterior wall of the house in the past does not need to be decorated, but some villagers have built a new house, only pasting a tile in front, and some are plastered with a layer of white cement or gray cement on the other three sides, which will crack after a long time, mainly because the exterior wall is easy to absorb rainwater, and the bricks have strong water absorption. If the tiles stick to it, there is obviously a risk of falling off. For example, if a gate is rebuilt with bricks and then plastered with cement, obvious cracks will appear on the edge of the gate for a long time, which is very unsightly.

At this time, if it is reinforced with steel wire mesh, this phenomenon will not occur.

In recent years, the materials used to build houses in rural areas have changed, and now they are all frame structures. The foundation and ring beams are laid first, and then the house frame is poured with reinforced concrete. This type of house is safer than the previous civil or masonry structure.

But when the bricklayers first cemented the exterior walls, they found that the first cracks in the exterior walls after the new houses were built were the joints between the frame structure and the infill bricks, which were most prone to cracking. If it is not handled well, once it encounters rainy weather, the rainwater will follow the cracks in the cracked wall and the stains will enter the interior wall, which will affect the use of the house from the appearance and practicality.

Wall plastering and wire mesh are mainly used for building buildings in the city, especially where the new walls are adjacent to the existing walls. If you don't use wire mesh, it's easy to crack in the later stage. Many farmers in rural areas also use the method of tiling tiles or tiling outside the wall.

And because the wall is designed when building a house in the countryside, there is no problem of hitting the wall and erecting the wall in the later stage, so the house is generally not used, but some external walls will be used. If cost is taken into account, steel wire mesh may not be used, and nylon mesh and plastic mesh may serve a similar purpose.

Yes, because steel wire mesh can reinforce the wall, and it is relatively strong, so it is to strengthen the wall.

Yes. Because the wall is prone to cracks, the large hanging net can restrain the cracking of the wall, and the hanging net can adjust the problem of improper shrinkage, so for the sake of safety and smooth operation, the net will be hung.

It plays a fixed role to prevent the freshly plastered ash from falling off. Now more and more friends are returning to the countryside to build houses. There are a lot of details that we need to know and understand before building a house.

It would be more convenient if the whole process was outsourced to the renovation foreman, but if they don't understand anything, they will be fooled and don't understand anything. Prevent the wall from cracking due to tension. In other words, the steel mesh hung on the exterior wall can withstand a certain tensile force.

So as to ensure that the area where we hang the reinforcement mesh will not cause the plastering layer to crack due to the cracking of the wall. Therefore, for the parts connected by different walls, steel wire mesh is used to prevent cracking. Enhance the adhesion between the plastering material and the wall.

When plastering silk, the cement mortar is directly plastered on the wall with a trowel or a large bar. At this time, we hung a layer of steel wire mesh on the wall, which is actually equivalent to hanging a simple keel on the wall.

This layer of steel wire mesh increases the grip between the plastering material and the wall. It is very convenient for wall plastering, so it is also beneficial from the construction point of view. A layer of mesh should be nailed before plastering, indicating that the exterior wall of plastering is a concrete exterior wall, and a layer of barbed wire should be nailed in advance, which is actually equivalent to the steel bar in concrete.

In fact, there are not many nails made of steel wire mesh for painting exterior walls in rural areas.

Even if not the whole wall is nailed, when the city is built, more nails are made of barbed wire. Its purpose is only to prevent cracking, because concrete and brick have different degrees of thermal expansion and cold contraction, and beams, columns and windows have different degrees of shrinkage. If this layer of mesh is not added, the exterior wall that comes into contact with the back is easy to crack, and the cracking will cause water seepage.

And the steel wire mesh is fixed to the exterior wall.

At this time, the cement will enter the steel wire mesh frame, so there is a certain supporting force, which can make the cement more firm, and it is more economical and practical to paint the exterior wall with cement. We wanted to know what was the purpose of hanging a steel mesh on the outside of this wall? First of all, we need to understand some of the structures of this building.

Due to the different building structures, the materials and construction methods are also different. Nowadays, the houses built in the countryside are basically one-story or two-storey, and the highest is three-storey. Then their main structure can basically be said to be a frame structure, and occasionally there are brick-concrete structures.

Prevent cracking, as well as prevent scraping, when cracking, it is easy to repair, and when the crack wants to be plastered, it will not easily fall off and hurt people.

This prevents the wall from cracking, improves the load-bearing capacity of the wall, enhances the grip and wraps, and makes the built house stronger.

This is done mainly to prevent thieves or other animals, and mainly to protect everyone's safety.

The role of nailing and hanging steel wire mesh in the plastering layer of the exterior wall of the Jialing Tomb in the construction project is as follows:

1.Hanging wire mesh can prevent plastering cracking and easy plastering.

2.Strengthen the local cracking area to reduce the cracking.

3.If the plastering cracks, it will not easily fall downstairs and hurt people.

4.It is easy to paint and makes the ash layer firmly bonded.

5.It also reduces the pulling force between the walls and makes the walls more secure.

Nailing steel wire mesh is an anti-cracking measure, and it is generally done in the masonry and concrete frame beams and columns to make nail wheels and hang steel wires.

Exterior wall plastering with redrawn wire mesh or hot-dip galvanized steel wire mesh. Wall plastering and stucco engineering with these two cavity purebred mesh should be in half and half, some projects may choose to change the wire wire mesh considering the financial aspect, and some consider the construction quality of the project to choose a hot-dip galvanized steel wire mesh with good life and strong anti-corrosion ability, which can effectively fix the pipe and have high thermal conductivity.

Related Content: For the plastering layer to use the grid should not be greater than 20 20, the diameter is not easy to be less than 1mm, just the choice of straight spring diameter does not make much sense, choose and choose steel wire mesh, better yes.

The role of steel wire mesh in exterior wall plastering is mainly a measure to prevent falling off from the perspective of safety, and the effect on anti-cracking is relatively small, because of the problem of location; For the external insulation system, it is used in the surface brick finish, as for the role, it should first be anti-falling off and then anti-cracking, so that the grid should be selected, and the conversion of the grid comes from the specifications of the steel wire mesh stipulated by the state, and the grade of steel content is converted.

Precautions. The total thickness of the plastering layer should meet the design requirements; Cement mortar shall not be plastered on the lime mortar layer; Covering gypsum should not be applied to the cement mortar layer. And the setting of the round spike ash lattice seam should meet the requirements, the width and depth should be uniform, the surface should be smooth, and the edges and corners should be neat.