Why is the printed document greyed out

Why do printers sometimes print with bottom ash?

Printer knowledge.

I don't know if everyone has such a problem, I tried various methods when printing, and the printed file always has a bottom ash, in fact, the printed file has a bottom ash, which is basically the following reasons.

Printer knowledge.

1. New toner cartridge printing.

If the original HP toner cartridge you just purchased prints out a file with bottom ash, it is possible that there was a misimpact or misoperation during transportation or use, resulting in damage to the internal components of the toner cartridge.

Printer knowledge.

Of course, the reason for the quality of the toner cartridge itself is not excluded.

When transporting and storing toner cartridges, it is important to follow the conditions of use and storage.

Printer knowledge.

2. Print toner cartridges that have been used for a period of time.

If the toner cartridge has been used for a period of time, there is a phenomenon of bottom ash when printing, it may be that the scraping module of the toner cartridge or waste toner cartridge is damaged or is nearing the end of its service life.

During the printing process, the toner leaks or the waste toner is not cleaned up, which will cause the printing to have bottom ash.

Printer knowledge.

3. Powder filling leads to low ash printing.

If you use non-original consumables to print, the printed documents are prone to bottom dust.

Due to the lack of professional technology and production environment, the consumables produced by non-original consumables are easy to leak.

Powdering can also result in a bottom ash in the print. When filling powder, you need to manually disassemble the toner cartridge or punch holes in the toner cartridge for powder filling, and the overall airtightness of the toner cartridge after reassembly is poor, resulting in powder leakage and the formation of bottom ash on the printed document.

Printer knowledge.

Fourth, the use of poor quality printers.

In toner cartridges, in addition to toner, photosensitive drums.

and other components have a service life.

If the user has been using poor quality printing paper for a long time.

A large number of files with low coverage will cause more toner margin, but the photosensitive drum and scraping components will have a large loss, resulting in printing quality problems such as bottom ash and powder leakage.

Printer knows.

What should I do if the printer is grayed out and I can't print?

It is a great honor to answer for you, thank you for your support, I hope to solve the problem for you First, click [Start] - Device and Print In] to check the status of the connected printer, and find that the icon of the printer is gray. The printer is offline, so it can't print. 02Check whether the driver of the printer is installed.

If you find that the driver of the printer is installed normally, uninstall the original driver, delete the printer device, and reinstall the device beam and driver. Note the order in which the driver is removed and the Print Vanity device is removed. You need to delete the printer device before you delete the driver.

Otherwise, the interface as shown in the figure will be displayed, the printer is using the driver, and the ------printer cannot be deleted.

Summary. First of all, click [Start] - Device & Print In] to check the status of the connected printer, and find that the printer's icon is gray. The printer is offline, so it can't print.

Check whether the printer's driver is installed. If you find that the driver of the printer is installed normally, uninstall the original driver, delete the printer device, and reinstall the device and driver.

Note the order in which the driver is removed and the printer device is removed. You need to delete the printer device before you delete the driver. Otherwise, the interface as shown in the figure will be displayed, the printer is using the driver, and the printer cannot be deleted.

Select the printer--- select [Print Server Properties] -- click [Driver Tab] -- click Delete to delete the printer driver.

When installing, you must first use the 360 driver wizard to install the driver, and then select [Add Printer Device], otherwise, you will not be able to find the corresponding device.

The printer is grayed out and cannot be printed. What to do.

Hello, I'm sorting out the answer to your question, so please wait a minute

Gray web printer with exclamation mark.

First of all, click [Start Min Kai Jian] - Device and Print In] to check the status of the connected printer, and find that the icon of the bridge pants printer is gray. Sun explained that the printer was offline, so it could not be printed.

Check whether the driver of the hole printing machine is installed. If you find that the driver of the printer is installed with positive air and combustion normally, then uninstall the original driver, delete the printer device, and reinstall the device and driver.

Pay attention to the order of removing the driver and deleting the codegod printer device. To delete the printer device first, Qing dismantle and then delete the driver. Otherwise, the interface as shown in the figure will be displayed, the printer is using the driver, and the printer will be deleted without the reputation mold date method.

Select the printer--- select [Print Server Properties] -- click [Driver Scroll Tab] -- click Nian Jihu to delete, and then you can delete the printer driver.

When installing, you must first use the 360 driver wizard to install the driver, and then select [Add Printer Device], otherwise, you will not be able to find the corresponding device.

If the gray fiber blade is displayed, it should be that the printer is offline, try to print the icon of the printer with a right click - use an online printer or use the printer offline to remove the checkmark in front of the printer. If that doesn't work, reinstall the test.

1. First of all, we click the Microsoft button in the lower left corner of our computer, and the interface that pops up, we click on the bridge to set up a bad fight;

2. The pop-up interface, we click on the device;

3. In the pop-up interface, we click on the printer and scanner;

4. Then we click to open the printer we are connected to, and then click on Manage;

5. After clicking deepen, we see that the style font on the edge has been deepened, if we are worried about the average effect after deepening, it is best to slide the print density to the right to adjust it;

6. After the adjustment is completed, we click OK, so that we can print the font of the data to deepen the sensitive, and the effect will be very good.

The printer is gray, which usually indicates that the printer is not connected or malfunctioning. You can troubleshoot and resolve the problem by following the steps below:

1.Check the data cable: Make sure that the data cable between the printer and the computer is connected properly, if the data cable is damaged or not in good contact, the printer may not work properly.

You can try replacing the cable or connecting it to another device, such as a computer or other printer.

2.Check the printer driver: The printer driver is installed incorrectly or corrupted, which may cause the printer to not work properly. You can go to the printer manufacturer's official website and install the printer driver for your operating system. Which dates.

3.Check printer status: In your computer's Devices & Printers settings, check that the printer's status is grayed out. If so, try right-clicking on the printer icon, selecting "Refresh" or "Remove Device", and then reinstalling the printer driver.

4.Check power and connections: Make sure that the printer is turned on and that the connections between your computer and other devices, such as your router, are working. If the printer is connected to a network device, check that the network connection is working.

5.Clean the print head: If the printer has not been used for a long time, it may cause the print head to clog. You can try running the printer's cleaning program or use a specialized cleaning solution to clean the printhead.

6.Troubleshooting: If the above hail detection methods cannot solve the problem, you can try to check the error indicator of the printer, judge the possible problems of the printer according to the color and flashing of the indicator light, and refer to the printer manual to solve the problem.

7.Contact after-sales service: If the problem still can't be solved, you can contact the printer's after-sales service to seek help from professionals.

If the printer is grayed out, you can try the following methods to fix the problem:

1.Check if the printer is connected: Make sure that the printer has a stable and correct connection to your computer or network.

2.Check printer cartridges or toner: If the printer cartridge or toner has run out or is close to running out, it may cause a gray display. Replace the cartridges or toner and make sure they are properly installed.

3.Printer head cleaning: Turn on the printer, and use a soft clean cloth or cotton swab to gently wipe the printer head to remove possible dust or dirt.

4.Adjust printer settings: You can try adjusting printer settings, such as adjusting print quality or color options.

5.Update or reinstall printer drivers: Open your computer's Device Manager, find your printer, and update or reinstall its drivers.

If the above methods still do not resolve the issue, it is recommended to contact the printer's manufacturer or technical support department for further assistance or repair services.

A gray color indicates that the printer is unavailable. Check to see if the printer is disconnected from the computer, or if the printer is powered off.

Because of the exit mode, the header and footer are grayed out, which is in order to distinguish the body from the footer header, highlight the text, and do not affect the printing of the blind base.

1. Enter the header, the header text is black, and the text is a gray sail.

2. Exit the header, the color is reversed, and the text becomes black.

3. Ctrl+P to enter the print.

4. After entering the print, you can see that the header and body are normal black in the preview.