-
This question needs to be considered on a case-by-case basis.
1.Whether the color fades depends on the material *** bad. The good materials you buy can generally be used for more than ten or twenty years without fading. If the material is not good, it may start to fade in three or five years.
2.Whether the color fades depends on where it is used, used in home indoor furniture or decorative walls, no direct sunlight, generally will not fade for a year, if it is used indoors or on the balcony, it will fade within three months, direct sunlight can speed up the fading speed of wood veneer.
3.Whether the color fades depends on whether it is wet. Wood veneer is easy to fade after contact with water, if you accidentally touch the water, wipe it dry in time, do not contact the wood veneer with human sweat, hand sweat.
Even the sweat on the face can not be used, so that the surface will lose its luster and become unsightly.
-
The main cause of oxidation is light, especially direct sunlight, strong ultraviolet rays will aggravate the effect of oxidation, for places with sunlight, it is recommended to install curtains to cover it, or use natural and dark products, which can effectively delay oxidation. If curtains have not been installed before construction, it is recommended to cover the surface of the veneer with opaque cardboard, plywood or pearl board to avoid receiving light. This phenomenon of big brands will be much less, such as the Taiwan-made Keding board, you can go and see
-
Summary. Can the discoloration of wood veneer indicate that it is a quality problem, this question needs to be determined according to the actual situation. The reason is that how long does wood veneer fade, depending on where it is used, it is used in home indoor furniture or decorative walls, there is no direct sunlight, and it will not fade in a year, if it is used indoors or on the balcony, it will fade in less than three months, and direct sunlight can speed up the fading speed of wood veneer.
Can the discoloration of the wood blind return finish indicate that it is a quality problem, this question needs to be determined according to the actual situation. The reason is that how long does it take for wood veneer to fade, depending on where it is used, it is used in the family interior or decorative wall, there is no direct sunlight, and it will not fade in a year, if it is used indoors or on the balcony, it will fade within three months, and direct sunlight can speed up the fading of wood veneer.
1. The surface of wood veneer will oxidize and change color after a long time, so it can be regularly cured by touching and waxing wood veneer products; In particular, pay attention to the corners of the wood veneer not to have too much friction, otherwise it will cause the paint to fall off and affect the appearance. 2. When the surface of the wood veneer is polluted, it is necessary to use a soft cotton cloth for wiping, and if it is cleaned with a hard cloth, it will scratch the appearance. If the stain is too heavy to wipe clean, we can use a laughing detergent and a mild detergent, such as toothpaste or a special cleaner for furniture, to gently wipe it off, remove the stain and then dry wipe it.
Do not directly wash with clean water to cause the wood veneer to be deformed by moisture. 3. Pay attention to the destructive effect of the neutral rubbing reagent, and do not place the neutral reagent or a rag with water on the surface of the wood veneer for a long time, otherwise it will penetrate and damage the exterior paint of the wood veneer, and make the wood veneer material discolored or peeled.
I would like to know if the discoloration of wood veneer is a quality issue.
This is not a question that needs to be considered on a case-by-case basis. The reason is that how long can the wood veneer fall or the remaining color, depending on where it is used, used in the family indoor furniture or decorative walls, no direct sunlight, generally will not fade for a year, if it is used indoors or on the balcony, it will fade within three months, and direct sunlight can speed up the fading speed of simple wood veneer.
1. Factors such as tree species, length of time, and climate and environment of the town. Celery coarse 2, late wood and early wood, stamen wood and sapwood. 3. The cutting surface of the wood is different.
The more precious the wood, the more pronounced the color change and the greater the color difference. The cheaper woods are the most evenly coloured. Chromatic aberration is not a defect, chromatic aberration is the embodiment of natural beauty.
-
Hello dear. Your question is answered as follows. The simplest can be applied to change the color.
This effect can be achieved with paint. It can also be mixed with pigments, but with water-based pigments. The concentration is very high, first put less, then add water, and then debug on the veneer to talk about the cheats, and slowly blend.
Once you've set your favorite color, brush it onto the board and then paint it. The glossy surface (the surface that can be directly seen from the outside) of the wooden front song products made of clear water paint needs to be veneered or veneer, including all the side panels of the door and cabinet body, countertops, door and window covers, baseboards, etc. Whether to do natural color or dye depends on the design style and personal preference, which is not necessarily.
There are a lot of home renovations that are dyed with veneer. It is possible to change the traditional shade. Make all the colors you like.
It can be adjusted with paint, so that the effect is best. It can also be mixed with pigments, but it is best to use water-based pigments. That concentration is very high, first put less, then add water, and then debug on the veneer, and slowly mix.
Once you've set your favorite color, brush it onto the board and then paint it.
-
1. The new Chinese style can be veneered with Chinese mahogany, which is a color that most Chinese particularly like. In the new Chinese decoration, the full use of Chinese red can increase the warmth of the interior, can create a festive atmosphere, and the red luck is also very auspicious.
2. Red oak: red oak is mostly produced in the United States, the texture of this wood veneer color type is rough, the pattern is clear, it has a distinct mountain wood grain, and it has a good texture to touch, and the red oak is used for home decoration in a higher grade, so its cost is higher than other wood veneer color types.
3. Or you can also choose gray finish, which is more stable. It brings out the nobility of silver pear wood and the fashionable atmosphere of gray. And the overall can achieve a good-looking visual effect.
4. After the veneer is bought, it should be brushed with varnish as a protective layer. The wood veneer is not the same color as the latex paint. Latex paint is a kind of water-based paint prepared by adding pigments, fillers and various additives to synthetic resin emulsion as the base material, also known as synthetic resin emulsion coating, which is a kind of organic coating.
5. The silver pear wood veneer can be matched with a light gray wood veneer, which makes the matching effect even taller. Or you can also match it with red, and of course you can also match it with dark blue, both beautiful.
6. The color of wood veneer is the color repair process of grinding and priming. Handle the substrate and use sandpaper to sand off pencil marks and other dirty things left by the woodworking on the wood veneer. Make a head-to-head celery primer to play a sealing role and prevent the nails from rusting.
Adjust the gray and repair nail holes and seams, pay attention to the color to be consistent with the color of the wood veneer.
-
Summary. Answer: Kiss hello How to change the color of wood veneer Polishing 1, use coarse sandpaper to polish the places that need to be painted, pay attention to the corners of the place not to polish too much, and keep the original shape of the board.
2. Dip a cloth in water, make it semi-wet, and wipe the powder on the freshly sanded wooden board. 3. Take the fine sandpaper and re-polish it, paying attention to the corners. 4. Clean up the powder with a water-soaked cloth.
Brush with paint. 1. Take the paint and brush, and open the paint cover. 2. Dip the brush in the paint bucket, don't get too much paint at a time.
3. The rules of painting are from top to bottom, from left to right. 4. Pay attention to the corners and hidden places should also be painted, and third, dry. Leave the painted planks for four to five hours until the paint is dry.
Fourth, re-polishing. Once the paint is dry, use fine sandpaper to sand the furniture from start to finish. This is to polish the uneven part of the paint to smooth out, so that it can be further painted.
Fifth, the second time to paint according to the third step above, the second time to paint. Note that if the paint is too thick, you can add an appropriate amount of rubber water, dilute the paint and then brush. Then continue to dry and sand.
Paint for the third time. Follow the steps above to paint again, so that the paint of the board is finished.
How to do wood veneer want to change the color.
Answer: Hello kiss How to change the color of wood veneer Polishing 1, use coarse sandpaper to polish the places that need to be painted, pay attention to the corner of the Zhengyan do not polish too much, and keep the original shape of the plank. 2. Dip a cloth in water, make it semi-wet, and wipe the powder on the freshly sanded wooden board.
3. Take the fine sandpaper and re-polish it, paying attention to the corners. 4. Clean up the powder with a water-soaked cloth. Brush with paint.
1. Take the paint and brush, and open the paint cover. 2. Dip the brush in the paint bucket, don't get too much paint at a time. 3. The rules of painting are from top to bottom, from left to right.
4. Pay attention to the corners and hidden places should also be painted, and third, dry. Leave the painted planks for four to five hours until the paint is dry.
Fourth, re-polishing. Once the paint is dry, use fine sandpaper to sand the furniture from start to finish. This is to polish the uneven part of the paint to smooth out, so that it can be further painted.
Fifth, brush the second time according to the third step above, the second time to paint. Note that if the paint is too thick, you can add an appropriate amount of rubber water, dilute the paint and then brush. Then continue to dry and sand.
Paint for the third time. Follow the steps above to paint again, so that the paint of the board is finished.
The method of changing the color of the wooden board, first of all, the lacquer surface of the Hino Forest is treated with fine sandpaper and haired, and the old paint is softened with a pretreatment agent). It can also be bleached with bleach, preferably with a fine planer, to remove the surface of the wood
-
Wood veneer, as the name suggests, is a wood veneer made of low-fiber substances such as wood, wood chips, and bamboo chips as the main raw materials.
Low-carbon environmental protection is its biggest advantage, coupled with the relatively simple production and construction, unique and humanized design style, commonly found in our home walls, home surfaces, facades, etc., by our people's love.
What are the disadvantages and hazards of wood veneer?
1. Formaldehyde hazards If you ask which decoration material has the most obvious formaldehyde odor, I believe many people will say that it is a wooden material, especially in the middle and late stages of house decoration, the formaldehyde smell brought by wood is particularly obvious, such as wooden cabinets, wood veneer is the same reason.
2. The quality of cost-effective wood veneer is actually divided into three, six, nine, etc., good quality raw materials are high-quality wood such as oak, and the general quality of raw materials is the general wood used, unlike other material finishes, buying 100 yuan of veneer can present a 150 New Year's Day effect, and wood veneer is usually a penny for a penny, and the cost performance is not high compared with other materials.
3. Shoddy wood, we all know that its surface is not smooth and shiny, and it is necessary to carry out secondary processing of raw materials, which is common to paint the surface, which increases the cumbersomeness of production, as well as shoddy in production. For example, when a high-quality oak veneer is ordered, and the result is a case where the theme is bent oak and other oak slag is used to fill it. SummaryAlthough there are many shortcomings of wood veneer, it is still loved by many people, and the reason is that our traditional view of style is favored.
-
Dear, hello If you want to change the color after the wood veneer decoration, you can consider the following methods:1Apply refreshed wood paint:
Use the original wood paint sandpaper to polish the original wood paint and apply a new color and paint. 2.Refurbishment of old wood surfaces:
Use a paint stripper to peel off the existing paint and re-paint it. 3.Replacement of wood veneer:
The existing wood veneer is dismantled, replaced with a new wood veneer, and a new paint treatment is applied. It is important to note that these methods need to be operated with caution to avoid unnecessary damage. If you're not sure how to do it, it's advisable to seek the help of a professional renovation company or carpenter.
Good technical wood, rich colors, diverse textures Technical wood products are designed by computers to produce colors and textures that natural wood does not have, with brighter colors, stronger three-dimensional textures, and more dynamic and dynamic patterns.
Hello, Xiaotianer is happy to answer for you! >>>More
1 Yuansenyuan (China's famous brand products, top ten brands of blockboard, Jiangsu famous brand, Yuansenyuan decorative materials****)2 Jinqiu (Hebei Province famous trademark, China famous wood-based panel production and sales enterprises, Hebei Jinqiu Wood Industry****)3 Fuxiang (China famous brand, China Environmental Labeling Product Certification, Hunan Fuxiang Wood Co., Ltd.) 4 Yellow Cat (Shandong Province famous trademark, specializing in the production of blockboard enterprises, Jinan Yellow Cat Wood)5 Moganshan ( China Famous Trademark, China Famous Brand, Zhejiang Famous Trademark, Zhejiang Shenghua Yunfeng New Material Co., Ltd.) 6 Tengfei woodworking board (top ten brands of woodworking board, Hebei famous brand products, Hebei famous trademark, Hebei Tengfei wood ****) 7 Penghong (China famous brand, Liaoning famous trademark, Liaoning famous brand, leader in Chinese artificial board industry, Dalian Penghong wood industry)8 Weiye (Guangdong famous brand, large enterprise specializing in the production of environmentally friendly plywood wood products, Guangzhou Weizheng wood products ****)9 Millennium Boat China well-known trademark, Hangzhou famous trademark, Zhejiang famous brand products, millennium boat group Huahai Wood Industry) 10 Global (Jiangsu Province famous brand products, top ten brands of blockboard, Nantong Fusheng Wood).
1. Appearance. Without any modification, the gaps left naturally in the installation are generally called natural seams; For the sake of the beauty of the gap, the notch or protrusion deliberately processed along the edge of the wood veneer with a certain process is called the process seam, and the common process seam is in the shape of a groove. >>>More
How long does brazilwood flower? Brazilwood usually blooms around January each year. The flowering period can last for about 1 month. >>>More