How does the stone curing agent work, and who knows what to say?

Hello, we all know that the decoration of stone is indispensable decoration materials, but also used in a wide range of places, but the stone is used for a long time is in need of maintenance, then the stone curing agent is the stone can play a preventive or maintenance role in the product, it is the most basic protection of the stone is waterproof, in addition to anti-fouling, acid and alkali resistance, reinforcement. So how does the stone curing agent work, the following is a brief introduction, you can refer to it. Natural stone in the long-term use of no maintenance or improper maintenance, the surface will appear a large area of scratches, defacement, affecting the natural beauty of the stone decorative effect, if the replacement is not only more expensive, but also will affect the normal work and life.

Stone that needs to be renovated: 1. In most cases, there will be a multi-type mixed operation during the construction of the decoration project, and the movement of a large number of personnel and materials or the corrosion of the decorative materials will directly damage the stone floor that has been laid, and in serious cases, it will cause a large area of fouling, which cannot meet the standard of delivery; Sometimes, due to the poor craftsmanship of the paving personnel, the ground is uneven or there are scissors after the completion of the paving (uneven stone level), and the stone needs to be renovated. 2. After long-term use, even if the stone is properly maintained, it will lose its original decorative effect due to reasonable wear and tear; Most of the secondary decoration will be replaced with the old, but the stone floor generally does not need to be replaced together, and only a relatively simple renovation treatment is needed to get a new effect.

Stone renovation process: 1. Repair the damage and repair the glue in the middle seam (seamless treatment): use power tools to re-cut the original damaged surface and the middle seam of the stone installation to minimize the width difference of the gap.

Repair with special marble glue and bring it as close as possible. Stone color 2. Cutting edge grinding: Use a special cutting grinding disc to focus on grinding the cutting position to make it close to the stone level.

3. Grinding and polishing: The water grinding disc is used to grind from coarse to fine, so that the ground is smooth and flat, and the stone grains are clear. 4. Protection:

The use of special stone curing agent, so that it fully penetrates into the stone and forms a protective layer (water barrier), so as to achieve waterproof, anti-fouling, anti-corrosion and improve the weathering resistance of stone is an advanced process. 5. Crystallization treatment: the use of targeted crystallization powder or crystallization agent, under the dual action of high temperature generated by the heavy pressure of special equipment and friction with stone, through a comprehensive physical and chemical reaction, crystallization arrangement is carried out on the surface of the stone to form a clear, dense and hard protective layer, which plays a role in adding light and hardening to the surface of the stone.

The above about the related role of stone curing agents is introduced here, some stone curing agents in addition to waterproofing, also have hardening functions, so that the stone becomes as hard as the original, especially for the treatment of soft boards, damaged boards and pulverized boards. I hope mine is helpful to you, if you think it's powerful, give it a thumbs up, and I'll answer more attentively in the future, I wish you a happy life.

Stone curing agent:

1. Dry the slate in an oven or gas gun.

2. The stone needs to be warmed to 40 degrees Celsius before the curing agent can be used, the reason is that the temperature is too high, the solvent volatilizes too fast, and the curing agent hardens on the surface of the stone early, resulting in insufficient penetration depth, and the deep curing effect of the stone curing agent is very poor, and the water spot substance can seep into the visual range.

3. Use an appropriate amount of curing agent. The amount of stone curing agent used must be sufficient, otherwise the stone absorption is not enough to produce the curing effect.

4. Apply evenly with a brush, so that the stone curing agent can penetrate into every point of the stone surface very evenly, so as to avoid the occurrence of large local use, strong maintenance, insufficient local use, and the state of infiltration of pathological factors.

5. Wipe the residual curing agent with a rag to avoid the residual curing agent before the surface hardening of the stone and destroying the gloss of the stone surface.

6. Static maintenance for 24 hours before the project can be carried out, if the curing agent has not been completely hardened, its maintenance effect is not good, which may lead to maintenance failure.

When drying the slate, it should be noted that the speed of the gas gun on the slate should be controlled, if the speed is too fast, the heat source emitted by the gas gun conducts to the surface of the slate at a temperature that is not high enough, and the moisture in the stone void cannot be effectively removed. If the gas gun moves too slowly and concentrates on a certain point, it will make the temperature of the stone surface too high, and in severe cases, the stone surface will expand and crack.

Stone is a commonly used material in the decoration industry, mostly used for outdoor decoration and public decoration, stone curing liquid is a solution to maintain the quality of stone. It needs to be said that the stone curing liquid is not the same as the stone protection liquid, and there are some differences. Protective solution is a solution to protect the quality of stone.

The following is an introduction to the different maintenance methods used for different types of stone: 1. Marble. It is soft, has poor acid and alkali resistance and weathering resistance, and is easy to absorb liquids such as oil and water, and is easy to be scratched.

The best protection for polished marble is to pre-protect the marble with a penetrating waterproof, oil-repellent and repellent agent before it is put into use. Regular cleaning with neutral cleaning agent is used daily, and acid cleaning agent is not allowed. 2. Limestone.

Easily absorbing oils and other water-based liquids, easily scratched and corroded by acids, and more susceptible to contamination than marble, most limestones are porous and absorbent. It can be cleaned regularly with a mild detergent for daily use. 3. Granite.

The color is dark, acid and alkali resistant, and weathering resistant. However, there are also pores on its surface, which is more absorbent and can also be contaminated. Pre-treatment with a penetrating protectant is used first, and it can be cleaned daily with a neutral or weakly acidic cleaning agent.

4. Artificial stone. It is suitable for the ground, stove, etc. Neutral or mildly alkaline cleaners can be used for daily maintenance.

In addition, if it is a light-colored stone, the maintenance needs to be taken extra care. Penetration protection should usually be done before installation, and then cleaned with neutral or weak alkaline stone detergents for future maintenance. Stone care is mainly due to the weathering and lesions caused by the environment, man-made, and the stone itself, and after chemical treatment, the original appearance of the stone is reproduced, that is, the renovation of the stone.

Generally, the stone encounters problems such as water seepage, pollution, weathering, etc., which will cause gloss and wear on the exterior wall, so it is necessary to take professional care of the stone. In general, the stone needs to be treated in the following aspects: 1. Water seepage and pollution of the stone exterior wall

Wipe with water without the need for other detergents. 2. Prevention of water spots: use multi-functional protective agents or special stone protective agents before construction.

3. Treatment of Baihua: The surface of the stone is protected and the waterproof function of the joint filling part is strengthened. The above is some sharing about stone maintenance, I hope it will have a certain reference for you!

In addition, it should be noted that carpets and debris should not be covered for a long time. In order to keep the stone breathing smooth, it should be avoided to cover the carpet and sundries on the stone surface for a long time, otherwise the moisture under the stone cannot volatilize through the stone capillaries.

As a building decoration material, stone is favored by consumers because of its nobility and elegance, but there will be various problems when it is used, which makes people realize the necessity of stone maintenance, so what is the stone curing agent? What is the purchase method of stone curing agent? Let's take a look at the numbers below!

Stone curing agent:

1. What is a stone curing agent?

Stone curing agent is a product that can play a preventive or maintenance role in stone, its protection of the stone foundation is waterproof, in addition to antifouling, acid and alkali resistance, reinforcement, and to prevent the corrosion and weathering of the stone due to chemical reaction in the use of the stone, and keep the original color of the stone for a long time, so as not to envy the use of the stone color deepening or some accidents in the use of the decorative effect of the stone decline, can play this role in the product can be called the stone curing agent.

What is a stone curing agent.

Second, the purchase of stone curing agent.

1. Choose according to the protection requirements.

If the purpose of protection is to prevent panalkali, rust, etc., the effect can be achieved by using silicone-type stone curing agent; If the purpose of protection is to integrate waterproof and anti-fouling capabilities, it is generally necessary to use organic fluorine stone curing agent to achieve the effect.

2. Purchase according to the stone.

If it is a stone with a dense structure, such as white crystal, large flower white, etc., it is recommended to choose oil-based stone curing agent. Because the solvent components in it have strong penetration, they can penetrate deeper into the stone for protection; For stone with a general structure, oil-based and water-based stone curing agents can be selected.

3. Purchase according to the place of use.

If it is a restaurant, stove, driveway or other places that are easy to pollute, it is recommended to use an organic fluorine stone curing agent to improve the stain resistance of the stone surface. If it is outdoors, silicone-based curing agents can be used, but the product needs to be UV resistant, water and acid resistant.

Stone curing agent purchase.

4. Purchase according to the installation process.

If it is installed by wet paste or grouting process, it is recommended to use a special curing agent for the bottom surface of the stone to protect the bottom surface and four sides. The selection of the bottom curing agent should pay attention to the alkali resistance of the curing agent, and it should not affect the bonding fastness of stone and cement.

5. Purchase according to the stone.

Now there are many customers like to do film-forming curing treatment on the surface of rough surface stone, this kind of project recommends the use of organic silicon as raw material film-forming stone curing agent, this product has good hardness, high bonding strength, ultraviolet resistance and is not easy to yellow; Do not easily use acrylic as the raw material of the floor sealant (film-forming type), this product is mainly designed for the bottom surface sealing, and the use of stone surface often occurs peeling and discoloration. If it is a dark-colored stone such as black stone, because the stone is easy to change color after using a protective agent, it is necessary to do a small sample test when choosing a stone protective agent, and make a final selection based on comprehensive performance, effect and requirements.

Effect of stone conditioner.

Stone curing agent ensures the decorative effect of the stone, so as to better protect the stone, and at the same time can protect the stone at different temperatures and humidities. The above is what is the stone care agent and the introduction of the purchase method of the stone care agent, I hope it will help you. Stay tuned for more details about the renovation.

In home decoration, many people do not understand what the stone curing agent is for, in fact, it is a product that can play a preventive and protective role in the stone, and its most basic protection for the stone is waterproof, so how to use the stone curing agent? Let's take a look at the use of stone curing agents and the precautions for using stone repellents.

First, the use of stone curing agent.

1. The use of the oven to dry the slate, some companies in order to save costs cut corners, and do not dry the stone in advance and directly use the stone curing agent, resulting in poor maintenance effect. In fact, drying the slate is a very critical step, the main reason is: drying the slate can remove the moisture in the cracks of the stone, so that the stone curing agent can be smoothly soaked to a sufficient depth, and at the same time has a very deep field stove cleaning and maintenance function.

2. The stone needs to rise to 40 before the curing agent can be used, the main reason is that the temperature is high, the solvent evaporates quickly, and the curing agent hardens on the surface of the stone in advance, resulting in insufficient penetration depth, the deep protection effect of the stone curing agent is very poor, and the water spot substance can invade the line of sight.

3. The curing agent is particularly critical in terms of dosage. In the process of use, the dosage of stone curing agent must be sufficient, otherwise the stone absorption is not enough to achieve the maintenance effect.

4. Use a brush to paint evenly as much as possible, so that the stone curing agent can be very evenly soaked into every part of the outer layer of the stone, so as to prevent a large amount of local use. Otherwise, the maintenance is strong, but the local use is not enough, and the lesion components are infiltrated.

5. During the use process, it is necessary to quickly use a rag to wipe off the remaining stone curing agent to prevent the remaining stone curing agent from hardening the surface of the stone, which will affect and damage the gloss of the stone to a certain extent.

Second, the use of stone protective agent precautions.

1. You can't just believe in the instructions on the product, no matter what product is required to pass the on-site test, and only after passing can you determine whether it can be selected.

2. When choosing a product, do not be deceived by the appearance of the product hydrophobic function, the effect of the appearance is generally short-lived, if you remove the remaining part of the appearance, and then pass the test in the future, it is the real effect of this product.

3. When selecting, it is necessary to pay attention to whether the original color of the stone has changed after the use of stone curing agent, whether the remaining surface can be well removed, and whether it will affect the gloss of the stone appearance.

Stone curing agent is a product that can play a preventive or maintenance role in stone, its most basic protection of stone is waterproof, in addition to anti-fouling, acid and alkali resistance, reinforcement, and to prevent the corrosion and weathering of stone due to chemical reaction in the use of stone, and keep the original color of stone for a long time, so that the color of the stone will not be deepened after use or some accidents in use and the decorative effect of the stone will decline, and the product that can play this role can be called a stone curing agent. The following is a brief introduction to the purchase method of stone curing agent products.

Expert tips: how to buy stone.

Classification of stone curing agent products.

1) From the appearance, it can be divided into water-based curing agent and solvent-based curing agent;

2) In terms of efficacy, it can be divided into waterproof, antifouling, alkali-resistant, brightening and hardening types;

3) From the chemical composition, it can be divided into inorganic silicon, organosilicon, organofluorine, organofluorine silicon, silicon propylene (some compounds copolymerized by organic silicon and acrylic acid, such products can prevent a certain amount of water without affecting the adhesion), acrylic acid (such products can enhance the adhesion between stone and cement, which is not of much help to waterproofing, and can assist other stone curing agents to achieve certain functions);

4) In terms of effect, it can be divided into simple waterproof, waterproof and oil-resistant, waterproof and alkali-resistant;

5) On this basis, there are color enhancement, fast drying, slow drying type, fast curing reaction, slow curing reaction, etc.;

6) In terms of morphology, it can be divided into solid, colorless transparent liquid, white emulsion, paste, etc.;

7) Special classification (classified according to construction requirements) stone curing agent for construction on dry stone;

Stone curing agent for construction on damp stone.

Stone curing agent to prevent the regeneration of water spots (only for stone renovation);

Hardening: In addition to waterproofing, some stone curing agents also have hardening functions, so that the stone becomes as hard as the original, especially for the treatment of soft boards, damaged boards and pulverized boards.