How can we do a good job in stone maintenance?

Generally speaking, the maintenance and maintenance of stone that has been treated with protective treatment can be divided into:

Daily maintenance (daily): Vacuum cleaner, then wipe with a rag or mop dipped in water, and wipe with a rag or mop with a dilution of Pinno brand stone cleaner in a dirty place.

Monthly maintenance: Do it every two weeks to one month, use a rag or mop with Pinno stone cleaner or Pinno multi-purpose cleaner diluent to wipe. (Note: Do not use commercially available detergents in this case).

Annual maintenance: every six months to a year, Nuo brand cleaning agent to remove all kinds of dirt, polished stone, especially marble can be used Nuo brand stone maintenance agent or marble crystal surface agent combined with machine treatment.

All in all, stone is a very noble natural building materials, the method of maintenance is also more special, just cleaning must use stone special cleaning agent, ordinary cleaning agent not only can not achieve the effect, but also will leave a part of the fluoride in the stone, thus hurting the stone, so it is recommended that consumers: in the maintenance of stone please use Nuo brand special cleaning agent.

Stone maintenance method 1:

The use of solid wax to maintain the stone is the earliest stone maintenance method, which is mainly a solid paste wax applied to the surface of the stone, in order to ensure the flatness and brightness of the floor, but this method can not be maintained for too long, the hardness of the wax is too low, can not withstand greater friction, it is easy to damage, and once it encounters water, the ground will be very slippery, and it brings great inconvenience to people's walking.

Stone maintenance method two:

After the solid wax is eliminated, the wax water replaces it, and the stone has a better maintenance effect on the basis of solid wax, but it can not be maintained for too long, it will turn yellow after a long time, and the gloss will decrease, which seriously affects its appearance, and must be maintained once, so that it will consume a lot of time and money, and bring certain difficulties to people's lives.

Stone is a commonly used material in the decoration industry, mostly used for outdoor decoration and public decoration, stone curing liquid is a solution to maintain the quality of stone. It needs to be said that the stone curing liquid is not the same as the stone protection liquid, and there are some differences. Protective solution is a solution to protect the quality of stone.

The following is an introduction to the different maintenance methods used for different types of stone: 1. Marble. It is soft, has poor acid and alkali resistance and weathering resistance, and is easy to absorb liquids such as oil and water, and is easy to be scratched.

The best protection for polished marble is to pre-protect the marble with a penetrating waterproof, oil-repellent and repellent agent before it is put into use. Regular cleaning with neutral cleaning agent is used daily, and acid cleaning agent is not allowed. 2. Limestone.

Easily absorbing oils and other water-based liquids, easily scratched and corroded by acids, and more susceptible to contamination than marble, most limestones are porous and absorbent. It can be cleaned regularly with a mild detergent for daily use. 3. Granite.

The color is dark, acid and alkali resistance, and weathering resistance is strong. However, there are also pores on its surface, which is more absorbent and can also be contaminated. Pre-treatment with a penetrating protectant is used first, and it can be cleaned daily with a neutral or weakly acidic cleaning agent.

4. Artificial stone. It is suitable for the ground, stove, etc. Neutral or mildly alkaline cleaners can be used for daily maintenance.

In addition, if it is a light-colored stone, the maintenance needs to be taken extra care. Penetration protection should usually be done before installation, and then cleaned with neutral or weak alkaline stone detergents for future maintenance. Stone care is mainly due to the weathering and lesions caused by the environment, man-made, and the stone itself, and after chemical treatment, the original appearance of the stone is reproduced, that is, the renovation of the stone.

Generally, the stone encounters problems such as water seepage, pollution, weathering, etc., which will cause gloss and wear on the exterior wall, so it is necessary to take professional care of the stone. In general, the stone needs to be treated in the following aspects: 1. Water seepage and pollution of the stone exterior wall

Wipe with water without the need for other detergents. 2. Prevention of water spots: use multi-functional protective agents or special stone protective agents before construction.

3. Treatment of Baihua: The surface of the stone is protected and the waterproof function of the joint filling part is strengthened. The above is some sharing about stone maintenance socks, I hope it will have a certain reference role for you!

In addition, it should be noted that carpets and debris should not be covered for a long time. In order to keep the stone breathing smooth, it should be avoided to cover the carpet and sundries on the stone surface for a long time, otherwise the moisture under the stone cannot volatilize through the stone capillaries.

At present, the building materials on the market can be said to be countless and dazzling, and stone is one of them. Houses decorated with stone are not only stylish, but also upscale. But there are still many people who do not know much about the role and types of stone, so what are the common sense of stone maintenance?

First, the common sense of stone maintenance.

1.Marble: The texture of marble is relatively soft, although it has good acid and alkali resistance, but its weathering resistance is poor, and it is easy to be scratched in use.

The best care period for marble is before the marble is used, first pre-protected with a penetrating waterproof and oil-repellent repellent, and then cleaned with a neutral detergent, but it should be noted that it can be cleaned with an acidic detergent.

2.Limestone: Limestone is easy to absorb oil or hail and other water-based liquids, and it is also easy to be scratched or corroded by acidic substances, so it should be cleaned regularly with a neutral cleaning agent when used regularly.

3.Granite: Granite is generally darker in color, but it is resistant to acids and alkalis, as well as weathering. Secondly, it has many pores on the surface, so it has strong water absorption. Granite can be cleaned with neutral or mildly acidic detergents when in use.

4.Artificial stone: Artificial stone is widely used on the ground and stove, etc., and can be cleaned with neutral or weak alkaline detergents when used at ordinary times.

Second, what should be paid attention to in stone maintenance.

1.Do not wax at will: At present, there are many varieties of wax in the market, such as acrylic wax, oily wax, etc., which contain acid and alkali substances.

If these waxes are applied to the stone, it will not only block the respiratory pores of the stone, but also stain the dust to form wax criticism, making the appearance of the stone yellow.

2.Do not use non-neutral cleaning agents: In order to improve the cleaning effect, many cleaning agents contain acid and alkalinity, so if you use these cleaning agents for a long time, you will lose the luster of the stone surface.

3.Carpets and sundries cannot be covered for a long time after the end of the year: In order for the stone to breathe smoothly, the carpet or other sundries cannot be covered on the stone for a long time.

In addition, the moisture in the covered stone cannot be discharged in time, so the stone will cause lesions due to high water content. If you must lay carpets, change them frequently.

1. Clean the floor of the stove Naiqing Use a multi-functional floor scrubber, with cleaning tools and chemicals such as vacuum suction machine and stone washing water.

2. Waxing Use a professional waxing machine with high-grade stone care wax to wax the stone.

3. Polishing hidden grip Use a high-speed polishing machine for polishing to achieve a smooth and bright effect.