What is the correct way to spray flowers and leaves for beer?

This is the right way to grow flowers with beers, so let's take a look and make no mistake.

It is beneficial to spray flowers with beer and water, but it needs to be in moderation to avoid causing adverse effects and damaging plants.

The application of beer should not be strong, 1 part of beer is added to 2 parts of water and then stirred and sprayed, and it can be sprayed once a day during the growing season. Spraying every 15 days or so in autumn and winter can effectively improve the cold resistance of flowers and reduce the phenomenon of leaf fall due to low temperature. When spraying, both the front and back of the leaf should be sprayed, because the front and back sides are distributed with leaf pores, which can promote absorption.

Benefits of spraying plants with beer and water:

1. Beer contains a small amount of alcohol, which can play a role in insect repellent and sterilization.

2. Beer contains a large amount of carbon dioxide, which is an indispensable substance for the metabolism of various plants and flowers, and beer contains nutrients such as sugar, protein, amino acids and phosphate, which is beneficial to the growth of flowers.

3. Beer contains a large amount of amino acids, which are the inorganic salts needed by flowers.

It is better not to spray every day, and pay attention to the ratio of wine to water, and dilute the beer when spraying.

Leftover beer can be used to remove dirt from the gas stove. The sugar in beer breaks down oil, so wiping it with a cloth dipped in beer can quickly remove the stain. If it is a stubborn dirt that is difficult to remove, soak it before scrubbing.

After wiping, the distinctive smell of the beer disappears after about 10 minutes.

Can be used for beauty. Choose draft beer, pour it into a small container (such as a glass), soak it in medical cotton yarn (available in pharmacies, choose a small one), pick it up and apply it to your face for about 10 minutes. It can remove ** small particles on the surface, because the hops in beer have this effect.

I have added thirty or fifty drops of watering can water through the test (one month after the expiration of beer is opened), but there is a smell of alcohol, there is an effect, but a few days of spraying the reaction is shown, it is recommended to spray a very small amount of ten days and a half months do not spray!

1. Direct watering can be used to water the flowers with beer, but the beer and water should be mixed in a ratio of 1:50.

2. If watering the flowers directly with beer will cause the plant to wither, in addition to direct watering, you can also put the beer into the watering can blind imitation.

3. Add an appropriate amount of water to dilute the beer, and then spray it on the leaves or flowers.

4. You can also use cotton cloth to dip an appropriate amount of beer, and then wipe it directly on the flowers, which can play the role of foliar fertilization. Fiber grinding.

Before wiping, dilute water and beer in a 1:1 ratio, dip the beer in a cotton wool or a clean soft cloth, hold up the flower leaves with your left hand and gently wipe with your right hand, mainly on the back of the leaves.<> In this way, after wiping, the leaves can become more green and shiny, and the texture of the leaves will appear more fat.

1. First of all, when wiping the leaves with beer, you can not do it directly, you can dilute it first, and mix it evenly with water and beer in a ratio of 1:1. Then dip the beer in a cotton pad or a clean, soft cloth, and gently wipe with your left hand while wiping the flower leaves with your right hand.

2. The wiping direction should be carried out from the tail of the blade upwards, and the front of the blade can be wiped first according to the wiping order, and then the back of the blade can be wiped. After wiping, the leaves can directly absorb nutrients, so that the branches and leaves become more green and shiny, and the texture of the leaves appears thick.

Beer contains a lot of carbon dioxide, which is essential for plant metabolism. In addition, beer contains nutrients such as sugar, protein, amino acids and phosphates, which help the plant to grow and achieve the purpose of luxuriation.

Watering the flowers with beer and wiping the leaves can play a role in fattening, which can make the flowers and leaves more vigorous and thick, and the flowers will be larger and more colorful and beautiful. It should be noted that the front of the leaf should not be wiped and the back of the leaf should be wiped.

Beer is rich in nutrients, many plants and flowers can use it to wipe the leaves, common pothos, junzi orchid, rich bamboo, fortune tree, evergreen and other foliage plants. Use a clean, absorbent cotton or a relatively soft cloth to wipe the leaves after dipping the beer. Dilute it with water before using beer, and when wiping the leaves, wipe from the top of the tail of the leaves, first the front of the leaves and then the back.

1. The leaves are oily: After wiping, the leaves will look more green and shiny. There will be dust on the leaves during normal maintenance, and the leaves will be more oily after wiping.

2. Promote growth: Because the nutrients in beer are conducive to the growth of plants, proper use can promote larger and thicker leaves, and the ornamental value will be higher.

When using, the concentration of beer should not be too high, it must be diluted with water first, and the leaves of the plant cannot be wiped directly with beer. If it is not diluted, there is a high chance that the leaves of the flowers will be burned.

Flowers can be watered, but not all flowers can be watered with beer, and they need to be diluted.

Prevention and treatment of yellowing. Mixing beer with ferrous sulfate solution at a volume ratio of 250:1 and spraying the branches and leaves of mast flowers, camellias, cycads, rhododendrons, orchids and other flowers can effectively prevent and control yellowing.

Spray once every 3 5 days, spray 3 times in a row to see the effect, better than the use of ferrous sulfate alone.

Promote the growth of plants. Mix the beer and aspirin solution in a volume ratio of 250:1 and add a small amount of vinegar, and spray 2 3 times before the leaf bud germination or flower bud differentiation of acid-loving flowers such as rhododendron, camellia, cycad, white orchid, etc., which can promote the rapid growth of new shoots, full flower buds, and increase the number; If the flower is sprayed before the flower, it can also bloom in advance, and make the flower enlarged, the flower color is bright, and the flower fragrance is rich.

Spray the leaves with beer. After mixing water and beer evenly in a ratio of 1:1, spraying flowers with relatively small leaves such as bamboo, umbrella grass, spider plant, orchid, cycad, geranium, etc., with a fine-eyed watering can, can also receive the effect of watering flowers with beer.

Wipe the leaves with beer. All ornamental flowers can be dipped in beer with absorbent cotton or a clean soft cloth and gently wiped on the leaves. When wiping, you can use your left hand to hold up the flower leaves, and gently wipe with your right hand, and the wiping should be carried out from the tail of the leaf (leaf tip) upwards, generally wipe the front of the leaf first, and then wipe the back of the leaf.

After wiping, the flowers are more green and shiny because the leaves can directly absorb nutrients, and the texture of the leaves also appears fat.

Skillfully remove the smell of liquid fertilizer. Organic liquid fertilizer often has a smell, such as adding 5% of the leftover beer (preferably expired fermented) before application, stirring up and down with a wooden stick, the smell will disappear quickly. The effect is more obvious if some vinegar is added first when making liquid fertilizer, and then some leftover beer is added when fertilizing.

According to the experiments of floral experts, pouring beer into a vase with various flowers can extend the time of flower arrangement by 15-20 days.

The right way to water the beer:

1. Water the roots.

Beer can be diluted into a solution with water at a ratio of 1:50, and then the beer solution after mixing with water can be watered to the roots. During the normal growth period of the plant, it can be watered every 20 days or so.

2. Rub the leaves with water.

You can dilute the beer with water at a ratio of 1:30 to make a solution, use a soft cloth, gently dip the solution, and then wipe the leaves.

3. Spray with water.

Beer can be diluted 1:30 with water to form a solution, which is then placed in a small watering can and sprayed with water mist on the foliage of the plant.

4. Mix beer with soil.

In the spring, you can use beer to stir the soil mixture, place the beer-mixed soil about one-third of the bottom of the pot, and fill the pot with other soil.