Home decoration tiles, is it better to use tile glue or adhesive?

Hello, tile adhesive is a latex adhesive material that can be directly applied to the back of ceramic tiles. Tile adhesive is made of high-quality polymer emulsion material and inorganic silicate, and tile adhesive is usually used in combination with tile adhesive material. Mainly used in the tile without soaking in water, because this tile absorbs less water, after applying a layer of tile adhesive, it is better to stabilize the tile on the wall, tile adhesive is non-polluting, non-toxic, harmless, is a new type of environmental protection material; It can be applied on a variety of material substrates, with strong adhesion ability, water resistance, weather resistance and durability.

Xiangjia tile adhesive is a powdery adhesive material made of high-quality cement and high-quality quartz sand and polymer adhesive as the main material, plus various additives with accurate proportions and mixed by the mixer, which has a certain flexibility and fundamentally solves the common problems such as cracking, hollowing, falling off and leakage in building decoration. When using, add a certain amount of water-conditioned tile adhesive. Tile adhesive is a powdered material, mainly used in water-soaked tiles, because this kind of tile absorbs a lot of water, can be effectively combined with tile adhesive to better stabilize the tile.

Through the above analysis, two different tile auxiliaries have their own advantages and functions, tile adhesives can be used alone, but tile adhesives must be used in combination with tile adhesives. Hope!

It can be compared from these aspects:

1. From the construction point of view, the tile adhesive is a one-component emulsion, which is brushed when the lid is opened, and then used with traditional cement mortar. It is more convenient than tile adhesive construction.

2. From the point of view of adhesion, the adhesion of Visk tile adhesive is relatively strong.

3. From the perspective of construction cost, the construction cost of tile adhesive is higher than that of tile adhesive.

4. From the comparison of knocking bricks, the tiles with tile adhesive will not cause the whole tile to fall due to external force.

X0D X0A4, tiles are susceptible to stress changes and cause cracks.

Adhesive tilesIt is a kind of decoration that we often see, and it is also a particularly popular decoration house now, when choosing this decoration method, we all know that it is inseparable from the use of glue, so what do you know that adhesive tiles are easy to use? Let's take a look at what adhesive tiles are easy to use and how to choose tile adhesives?

What adhesive tiles work well?

1. Ordinary tile adhesive. First of all, let's take a look at the ordinary tile adhesive, its adhesion is average, so it is more suitable for pasting ordinary mortar surfaces or wall tiles.

2. Strengthen tile adhesive. Reinforced tile adhesives have a strong adhesion, so wall tiles and wood panels with higher bonding requirements can be used.

3. Heavy brick tile adhesive. As can easily be seen from the name of the product, this glue has strong adhesion, flexibility and flexibility, so it has a very strong adhesion and can resist the stress caused by the thermal expansion and contraction of the adhesive buried layer, gypsum board, fiber optic board, splint and other large area of board stickers.

4. Tile adhesive is also called tile adhesive or glue, that is, whether tile adhesive and tile adhesive are the same, but the declaration is different. Both are used to paste ceramics, floor tiles, tiles, and other decorative materials, both for exterior and interior walls.

5. The adhesive ability of tile adhesive is much stronger than that of general cement, and its water resistance is also better than that of freeze-thaw resistance and anti-aging performance. Tile adhesive is the adhesive material that is buried in the car.

How to choose tile adhesive?

1. Clean the construction surface first, so that the surface is firm, dry, clean and stain-free. Stir the tile adhesive in clean water, in a ratio of 25 kg and kg of water. Stir well, then let it sit for about a sixth of an hour, then stir gently.

Use it for about 2 hours. Do not use glue that has already been dried for secondary use.

2. The toothed scraper applies the glue to the wall, evenly distributes it on the wall surface of about 1 square meter, and can be pressed on the tile within half an hour. If adjustments are required, they should be made before fixing the tile adhesive.

3. Use a special toothed scraper to fill the mortar closed liquid worm with a bottom surface thickness of 3 to 5 mm (that is, the thickness of the sand on the tile), and then use the tooth surface of the scraper to pull the strip into a straight line or S-shape, and the blade plane intersects with the bottom plane at 45 degrees to 60 degrees.

4. It can be placed on the wall and floor in the order of placement and compression. And adjust the orientation of the tiles during the regular time. Undried glue can be removed with water, but only by mechanical means after curing.

Pay attention to the retention of tile expansion joints. Tile adhesives are suitable for 5°C 40°C environments. After a day, you can step in or fill the gap.

Ceramic tile is inseparable from every family, in the decoration of everyone needs to know which glue is suitable for tiles, in order to this time everyone needs to have a certain understanding of glue. The above is about what adhesive tiles are easy to use and how to choose tile adhesives, and this is the end of it. Here is a reminder that the construction environment is different, and there is no difference in the type of tile.

Ceramic tile is often used in the decoration of the decoration material, it has a very good aesthetics, and it is very convenient to clean, so it is deeply loved by the owners and is widely used in the decoration of the family. When installing tiles, it is necessary to use glue to bond, professional tile installers must know what kind of glue to use, and for friends who want to install tiles by themselves, they will encounter such a problem, that isWhat glue is good for sticking tilesThis? Let's take a look at the precautions for tile adhesive and use.

1. What glue is used to glue tiles?

1. Special adhesive for ceramic tiles, which can also be called tile adhesive, is a relatively new type of glue product, instead of the cement mortar used before, the adhesion of this glue is very good, much better than the mortar stirred out of cement sand, and there will be no natural falling off of the tile after a period of use. The special adhesive for ceramic tiles is characterized by very high hardness, waterproof, anti-freezing, and is also very convenient to use.

2. Tile adhesive, which is also a new type of material, uses the dry paste method, while the traditional cement mortar is the wet paste method, which requires the tile to be soaked in water, and the use of this material can save this step, only need to deal with the base layer of the ground. This method is very time-saving, without a lot of complicated processes, and also saves part of the cost of installing tiles.

3. Colorful caulk, this material is similar to the general colored cement, it has tile gaps, it has a lot of colors, so that people can choose according to their preferences, and its compressive performance and wear resistance are very good.

Second, the use of tile adhesive precautions.

1. When using tile adhesive, there is no need to soak the tile in water, nor do you need to wet the base of the ground, you only need to clean and smooth the base of the ground, but if the tile with strong water absorption performance is strong, then you need to soak it in water for a few minutes.

2. The strength of the tile adhesive is not very good when it is just used, and it takes a few hours to be able to use it, so before installing the tiles, it is necessary to prepare the tile adhesive, and after installing the tiles, you should wait for a day, do not place heavy objects on the tiles during this time, and do not have too heavy pressure on the tiles.

3. If you install tiles in the cold winter, then you should pay attention to the purchase of anti-freeze tile adhesive, which can be used in an environment of minus ten degrees, and will not appear.

4. The adhesion of tile adhesive is very strong, which can effectively bond the tile and the ground together, and at the same time, it can also prevent the tile from falling off naturally, which can effectively protect personal safety and prevent dangerous accidents.

After reading the above, we must have some understanding of tile adhesive, tile adhesive is a very good new type of porcelain with brick auxiliary materials, if you have a friend who is installing tiles at home, you may wish to try to use tile adhesive. On the question of what kind of glue is used for sticking tiles, I will briefly talk about it here for you.

If it is some artificial tiles, we can use tile adhesive, the water absorption rate of these tiles is relatively low, and it is suitable to use such a coke.

You should use an ordinary adhesive, or a heavy brick adhesive, or a polymer adhesive, so as to ensure the effect of the wall and the firmness of the tile.

In the process of home decoration, it is better to choose tile adhesive, because in this way, the tiles can be more firm. Easy to use later.

1. Tile adhesive: Most of the tile adhesive on the market is about 30 yuan, and 7-8kg is used in the construction of one square, and 20kg of tile adhesive is about a square, and the cost price is 30 divided by 12 yuan a square.

2. Adhesive: 1kg brush 12 squares, even if it is 500 yuan for 5kg a bucket, 5kg must be made 60 squares. 100 per kilogram divided by 12 equals one square yuan.

And at present, there are a lot of tile adhesive in China after the construction of hollow drumming bricks, tile adhesive will not appear hollow drumming off bricks, ceramic tiles appear to fall off the bricks to repair, first of all, you may not be able to find the same bricks, and the construction cost is high, waste of money, so from the safety and cost savings, the adhesive is better than tile adhesive.

Tile adhesive is better.

Tile adhesive, also known as face tile binder, is made of cement, quartz sand, polymer cementing material with a variety of additives through mechanical mixing. Tile adhesive is mainly used as an adhesive for bonding tiles and face tiles, also known as polymer tile bonding mortar. The tile adhesive completely solves the problem that there is no high-quality special adhesive material to choose from in the pasting construction of ceramic tiles, floor tiles and other materials, and provides a new and reliable ceramic tile special adhesive product for the Chinese market.

Features: 1. High bonding strength and fast hardening speed, which can greatly improve the service life and decorative effect of various paving materials.

2. The construction is convenient, and it can be used only by processing an appropriate amount of water and stirring. The tiles to be pasted do not need blisters, and can be pasted directly.

3. Excellent compressive and tensile strength, water resistance, alkali resistance and weather resistance, not affected by the environment.

4. Good workability, good water retention, workability and flow resistance. During the bonding process, the tile can be adjusted for 10 minutes and operated for 60 minutes.

5. The construction of ultra-thin layer can be realized, and the coating thickness is less than half of the traditional process, which saves costs and reduces the shrinkage rate, and will not cause cracking and falling off of the decorative adhesive surface due to stress.

6. Non-toxic, tasteless, non-polluting, it is a real green and environmentally friendly product.

Tile adhesive, also known as ceramic tile adhesive, is mainly used for pasting decorative materials such as tiles, face tiles, floor tiles, etc., and is widely used in interior and exterior walls, grounds, bathrooms, kitchens and other building finishing decoration places.

Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material.

Baohe tile adhesive, brick on the brick, but tile adhesive does not.

Floor solid tile adhesive and floor solid tile adhesive are used when tiling, but the two are different products, and the best effect is when tiling.

First, the raw materials are different.

1. Tile adhesive: the main components are quartz sand with small particles and high hardness, as well as cement and rubber powder.

2. Tile adhesive: the main raw materials are cement, sand, hydroxypropyl methylcellulose, calcium formate, polyvinyl alcohol, styrene-butadiene rubber powder.

2. Features. 1. Tile adhesive: high bonding strength and fast hardening speed; The construction is convenient and can be pasted directly; Excellent compressive and tensile strength, water resistance, alkali resistance and weather resistance, not affected by the environment; Ultra-thin layer construction can be realized; Non-toxic, odorless and non-polluting.

2. Tile adhesive: high adhesion, no need to soak bricks in the construction, good flexibility, waterproof, impermeability, crack resistance, aging resistance, high temperature resistance, freeze-thaw resistance, non-toxic and environmental protection, easy construction.

Third, the construction method.

1. Tile binder: Mix and stir a package of materials according to the specified water distribution ratio, stir until there is no agglomeration, let the slurry stand for 3 to 5 minutes, and stir again before use.

2. Tile adhesive: use a toothed scraper to apply the glue on the working surface to make it evenly distributed, and form a toothed shape, coating about 1 square meter each time (depending on the weather temperature, the construction temperature range is required to be 5 40), and then the tile can be kneaded and pressed within 5 15 minutes.

Tile adhesives must have good workability, good water retention capacity, open time and adjustment time at high temperatures, and good anti-slip properties. When laying tiles, the way tiles are laid using tile adhesive is called thin paste. Compared with the traditional cement mortar paving ceramic tiles, the thin paste method is the development trend, which has the following advantages: 1. It can be used directly with water, less maintenance in the later stage, the quality is high, and the bonding strength is 3-5 times that of cement; 2. The tooth type method is used to paste a thin layer, the dosage is small and uniform, and the binder is only 3-4mm to avoid tile hollowing; 3. The operation of workers is convenient and easy, and the efficiency of brick-laying is greatly improved, and about 25 can be paved every day; 4. Good water resistance, strong moisture-proof and impermeable function; 5. The nature is flexible, will not cause stress to the tile and make the tile crack, can withstand the cold and heat cycle without detaching from the base layer; 6. The tile does not need to be soaked in water in advance, and the wall does not need to be wet, which reduces the process and improves efficiency; 7. At the construction site, workers can complete the ratio of binder in the barrel according to the proportion, which is clean and efficient, and reduces the dust on the construction site.

Characteristics of tile adhesive: 1. The quality of cement, the thickness of sand and the mud content are difficult to control; 2. Cement mortar In the process of proportioning, whether the ratio is reasonable, whether the amount of material is in place, whether the mixing is uniform will affect the quality of cement mortar, affect the quality of tiling; 3. The technical requirements for workers are higher during operation, and the worker efficiency is only about 1 3 of that of thin paste workers; 4. It occupies a large operating space, and the ground is easy to regain moisture, which is not conducive to the cleanliness of the environment in construction; 5. Before paving, the tiles need to be completely soaked in water, and the walls need to be wet. As far as the home improvement environment is concerned, the current use of cement mortar paving, ** is much cheaper.

With the increase of labor cost, in the case of worker efficiency improvement, in general, the cost of thin lamination method is not necessarily higher than that of traditional paving method.