Is it better to have a paint free board cabinet or solid wood particle board? Is there a big differe

Paint-free boardThe cabinet is good, stillSolid wood particle boardGood? Solid wood is good.

Eco boards. It is to infiltrate the printing paper containing a certain color or texture into an adhesive called melamine resin, and then pave it on wood-based panels and plywood after drying and solidifying.

It is a new type of decorative material that is finally pressed together on the top of woodworking board or other furniture boards, which has many characteristics such as wear resistance, waterproofing, corrosion resistance, and not easy to stick to dust, mildew, and blackening. In addition, the engineering construction of this kind of plate is also very convenient.

The installation of the eco-board has high requirements for the construction team, and it is difficult to repair it once it is damaged. However, it can be slightly repaired with environmentally friendly paint of the same color, but it is impossible to restore the original appearance. strong decorative performance; The particle board should be made of wood trimming, followed by an adhesive.

or other additives. Not only the surface is smooth and smooth, but also has no knots, no expansion and contraction, no cracking, and has the advantages of sound insulation and noise reduction, heat insulation, and mildew removal.

Is there a big difference between the two? The warpage is not easy to deform; According to statistics, this type of board has a small warpage, so it is not easy to deform, and it is not easy to bend even when hanging thick clothes. In general, it has good stability, high strength, and good tensile strength.

Extremely wear-resistant; Because the inside of the solid wood particle board is a cross-shaped jagged structure of particles, it has extremely strong wear resistance and can be driven into nails and small screws.

Wait. This can be, but there is also a difference in comparison with log furniture.

The eco-board has a pure natural layering, the wood texture is clear, and there is no color difference on the surface. Not only is it stain-resistant, abrasion-resistant, but also waterproof, and it will not cause mildew due to damp walls. The most important thing is that the surface of this type of board is not painted, and it is extremely inevitable that the paint will evaporate unhealthy taste and carcinogens.

Although solid wood particle board has the reputation of environmental protection, it is made of a lot of wood chips glued together. Super glue contains a lot of indoor formaldehyde, so it is more reliable to talk about environmental protection or ecological boards. The environmental performance of the eco-board can reach E0 level, which is a reliable board with environmental protection, non-toxicity and tastelessness.

I think it's better to paint free board, this quality is better and there is no odor. The difference is very big, ** is completely different, and the quality is not the same, the formaldehyde content is different, the smell is different, and the degree of decoration is not the same.

Solid wood is definitely better, the difference is relatively large, the appearance is different, the hardness is different, and the use is different.

I think it's better to make wood particle board, the difference between the two is not particularly big, one is easier to operate, and the other is more difficult to operate.

To decorate the house, the order of wardrobe materials is: solid wood particle board, followed by ecological board, and multi-layer board is ranked last.

The environmental protection of solid wood particle board is undoubtedly the best, and its principle is to use solid wood as a raw material, add a certain amount of glue, and then press it. There will be a layer of melamine on the surface of the eco-board, and the multi-layer board is pressed with a lot of wood chips and a lot of glue, so relatively speaking, the material of the solid wood particle board is more environmentally friendly and healthy.

How much does it cost to customize the wardrobe of the whole house? Just enter the area + house type, and get the latest decoration in 10 seconds**: [Click here, get it for free**].

In wardrobe customization, you can choose a one-stop home improvement service platform like Tuba Rabbit, which cooperates with 110,000 decoration companies and merchants, as well as more than 1.3 million designers. Tuba Rabbit can recommend local reliable decoration companies to the owners for comparative analysis, and on this basis, it can protect the rights and interests of the owners, so as to "decorate first and then make payment", and reduce the worries of the owners.

It can also help the owners measure the house for free, so that the designer can come to communicate with the owner, and generally come out of the customized house 3D renderings within 2-3 days, which can be experienced for free, a one-stop home improvement service platform, which is to save worry, money and time!

Hope it helps!

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

To make a wardrobe, you need to use solid wood multi-layer boards.

Reasons for using solid wood multi-layer boards:

Solid wood particle board is a new, high-grade environmentally friendly substrate, and the technology is very mature. It is a board produced by the process of particleboard, and the principle is the same as that of MDF. Solid wood particle board has a high market share in the market of China or other countries because of its high quality and low price.

Half layers of solid wood multi-layer boards are more than two layers, there are four, six and eight layers and so on.

The advantage of solid wood particle board is that the amount of adhesive used is very small, which means that it is environmentally friendly. Compared with the real solid wood board, it has a wide board surface, smooth and smooth appearance, no knots, insect eyes and anisotropy and other shortcomings, no warping, no cracking, high physical and mechanical strength, equal longitudinal and transverse strength, sound insulation, mildew prevention, economy, thermal insulation and other advantages, and the ability to hold nails is one of the strongest in similar products.

The solid wood multi-layer board is not a particle board or MDF and other things, it strictly belongs to the category of solid wood board, multi-layer solid wood board is a layer of very thin solid wood vertical and horizontal layer by layer superimposed processing, foreign use for many years, very popular, commonly used in furniture, decoration, etc., multi-layer solid wood board is better than the log anti-cracking deformation, is a good board, good multi-layer solid wood board is not better than the log.

Compared with solid wood multi-layer board and solid wood particle board, in fact, both types of products are more environmentally friendly, but multi-layer solid wood board is better than wardrobe, because it is bonded with less area than solid wood particle board, and its environmental protection level can reach E1, which is a commonly used material for hand-made furniture. Moreover, it is bonded together with a whole sheet of solid wood panels, so the density and stability are higher than that of solid wood particle boards.

If you want to decorate the house to make a wardrobe, the general solid wood multi-layer board is better than the solid wood particle board, because its strength is relatively high, the solid wood multi-layer board retains the structure of long fibers, and also because the criss-cross place is placed with wood veneer, which also eliminates the possibility of deformation, which not only greatly improves the stability performance, but also greatly improves the strength of the wood.

The raw material of solid wood particle board is what we say that the wood bran is pressed by adding adhesives, and the main disadvantage is that it is very moisture-resistant. Solid wood multi-layer board is made of wood veneer, horizontal and vertical cross bonding and pressing, all kinds of effects wear resistance, moisture resistance, mechanical properties are better than solid wood particle board, want the best or use log board.

Custom wardrobes are liked by more and more people who decorate new houses because of their tailor-made, fashionable and beautiful, personalized and practical characteristics, but many people go to physical stores to see the model, and they begin to make difficulties again.

Introduce to the owners and friends the advantages and disadvantages of ecological board solid wood multi-layer board particle board, which is more suitable for cabinets.

Multi-layer board, also known as plywood, is a board-like material made of 3 or more layers (usually odd layers) of wood veneer arranged in the staggered texture direction through adhesive. Usually the veneer textures of adjacent layers are aligned perpendicular to each other.

Particle board is a wood or non-woody plant made of wood or non-woody plants with various excipients applied to the rubber material, no rubber and auxiliary materials, and the wood or non-woody plants are pressed into the sheet. MDF is a wood-based panel that is thermally made from wood after fiber separation and then by forming.

Multi-layer board is suitable for use as furniture, the advantage is that it is close to solid wood, but it is stronger and larger than solid wood, and the environmental protection is better than particle board.

Particle board is mostly used in non-load-bearing aspects, because the compression is not so large, so there will be a gap in the middle, and then there is more glue used in the processing process, so the formaldehyde produced will be more, and it also lasts for a long time, and the particle board is easy to crack and deform for a long time, and the furniture made of particle board is best not to move, and the structure is easy to loosen after being carried back and forth several times, and the particle board is not easy to make complex shapes.

Solid wood multi-layer boards.

It is composed of two parts: solid wood surface layer and solid wood base layer, the base material is composed of multi-layer plywood arranged in a criss-cross row, and the surface layer is processed by a variety of technologies such as solid wood iron sheet. The quality of the surface layer directly determines the quality of the board, so when choosing the board, we must observe whether there are cracks, wormholes, decay and other defects.

Advantages: solid wood multi-layer board structure is stable, not easy to deform, hard texture, strong nail grip strength.

Solid wood particle board

It is a kind of particleboard, which is a kind of homogeneous wood-based board that is processed from small diameter wood, thinning wood, wood core, etc. as raw materials, and is formed by hot pressing. It is widely used in furniture manufacturers in Europe and the United States, and the domestic high-end panel furniture market has also begun to use this kind of board in a large area.

Which is better? The difference between the two is that the composition structure is different, and in terms of stability, it is still the advantage of solid wood multi-layer boards. However, the solid wood multi-layer board is slightly higher, and which one to choose depends on your own economic conditions.

The answer is recommended to choose solid wood multi-layer, solid wood particle board, also known as particleboard, is to break the wood or wooden corners into scraps and then glue them together, so it is also called shredded board. As for environmental protection, the wood itself has no harmful substances, and there is little difference between breaking and whole boards.

Environmental protection mainly depends on the glue and production process and equipment inside. Small companies use cheap urea-formaldehyde resin (urea formaldehyde resin), and the formaldehyde emission is large. Big brands may use phenolic resin glue, etc., and formaldehyde is relatively less.

Big brands and big factories have better equipment, better edge banding process, and smaller formaldehyde emissions.

It is better to make a wardrobe with solid wood particle board.

1. The cost of particle board is low.

The purchase price of particle board is relatively low, the difficulty of secondary processing is low, and there is no need for painting, which is convenient for production.

2. Particle board is highly decorative.

The decorative performance of particle board is relatively strong, and it performs well in moisture-proof, scratch-resistant, high-temperature resistance, etc., with a wide variety of colors, and the surface can be flat and embossed, which is the most common coating method for most cabinets and wardrobes.

3. The particle board has high efficiency.

Particle board is suitable for large-scale machining, with easy precision control, high output, easy transportation, and competitive advantages in cost and efficiency.

The advantage of general solid wood particle board is that the amount of adhesive is very small, which means that its environmental protection is very good, it is compared with the real solid wood board, the board surface is wide, the appearance is smooth and smooth, there are no knots, insect eyes and anisotropy and other shortcomings, no warping, no cracking, high physical and mechanical strength, longitudinal and transverse strength, sound insulation, mildew prevention, economy, heat preservation, etc. However, when it comes to wardrobes, multi-layer solid wood boards are better, because the area of multi-layer board bonding is less than that of solid wood particle board, and its environmental protection level can reach E1.

New house decoration, wardrobe customization with multi-layer solid wood or particle board? Which one is better?

Which is better, solid wood particle board or solid wood multi-layer board.

Answer: In terms of glue consumption, particle board is more than multilayer board. Combined with the characteristics of wood, particle board glue is more environmentally friendly, and the best choice for playing cabinets is multi-layer board. Let's take a look at the two types of plates:

1.Particle boards.

Sound absorption, sound insulation, large particles are not suitable for on-site production.

It is a kind of particleboard, which is pressed by sawdust and wood scraps and adhesives, and the cross-section of the board is composed of three layers, the outer two layers are fine particles, and the middle layer is relatively large particles.

2.Multi-layer boards.

High hardness, no deformation, pay attention to flatness.

Also known as plywood, it is made of multiple layers of solid wood sheets laminated, and the amount of glue used is between the joinery board and the particle board. According to the number of layers, it is divided into plywood, plywood, plywood, etc., and the most commonly used are plywood and plywood.

Each has its advantages.

Solid wood particle board

Solid wood particle board is a board with superior environmental performance, this material has a large wood particle, it retains a lot of natural wood essence, and always has very good environmental performance. And because the surface of this kind of plate is smooth and smooth, no warping and no cracking, it has good physical properties, sound insulation, mildew resistance, and heat preservation, which is very economical and practical. Secondly, the solid wood particle board has a strong nail grip.

The inside of the solid wood particle board is a granular structure of cross and staggered structure. Therefore, the nail grip is strong, and round nails and screws can be nailed. These machinability properties are significantly better than MDF, but there is still a gap compared to solid wood furniture.

Paint-free board: no color difference on the surface of the paint-free board, with self-extinguishing from the fire, washable, wear-resistant, moisture-proof, anti-corrosion, acid-proof, alkali-proof, non-sticky dust, not because of the dampness of the wall and mildew blackening, product design and production are exquisite, the shape and color are reasonable, and the construction is convenient. It is made by immersing paper with a certain color or texture into a melamine resin adhesive, drying and curing, laying it on particleboard, moisture-proof board, MDF or other solid wood boards, and finally hot pressing. Then, the paint-free board cannot be bumped, once the damage is permanent, difficult to repair, and can only be repaired with environmentally friendly paint of the same color.