How to make foam rockery, how to make rockery

Long-term use of foam rockery sculpture production method:

We first make a brief introduction to the foam gypsum material, I believe that everyone will not be unfamiliar with foam, it can be said that we can see them everywhere in our daily life, in fact, foam is a plastic made of resin, because there are a large number of gas microporous dispersed fixed plastics, with lightweight, heat insulation, noise barrier, shock absorption and other advantages, has become a popular industry in plastic processing.

1.Material.

Because of the material, the foam is very prone to damage, so in addition to the foam, the material used to make the foam rockery also needs to use some gypsum, which can play a simple protective role, and can also be shaped.

2.Get in shape.

It takes a lot of skill to shape the foam, and it takes a lot of skill to carve out the uneven and strange shapes of the rockery with a knife in your hand, and if you make a mistake, it means that this piece of foam is wasted and needs to be remade.

3.Pouring plaster.

The main thing is to use gypsum to mold, and then use melted foam.

It is poured directly into the model of the gypsum rockery that has been presented, so that the shape of the rockery can be displayed after the foam has cooled.

4.Chromatically.

It is very critical, it can be said that it directly affects the realism of the rockery, because our common foam is pure white, while the rocks in nature are gray-yellow, pale yellow or even dark black, and it is also necessary to pay attention to the cracks, faults, cracks and even irregular weathering traces of the natural characteristics on the surface of the rock.

If it is indoors, it is generally not necessary to use gypsum, and it can be directly colored after foam modeling rockery.

The design and production of rockeries should be adapted to local conditions, and the shape, size and color of rockeries should be selected according to the local environment and architecture. The choice of stone should be appropriate to the local environment and geology, for example, if you want to build a desert garden, you should not use lake stone, because its characteristics are not easy to blend into the environment. You can use stones that are unique to the area, and the hard texture of the stone can be used as a rockery.

The key is to build with originality. Not only does it save costs, but it also blends into the local environment.

Make a rockery micro-landscape with the stones picked up on the roadside by yourself, turning waste into treasure.

Steps to make absorbent stone rockery:

1. Knocking of mountain contours.

Be sure to choose the right pot before making it, and choose the size of the material according to the pot. Observe the top contour line of the stone, regardless of hard stone, soft stone, and Shangshui stone when the contour line is not obvious, it should be knocked to make the ups and downs distinct and rhythmic.

2. Cutting sawing and bonding.

A stone cannot constitute a complete picture of a basin of landscape, so it is necessary to combine multiple stones to form a landscape. The stone is generally natural and unprocessed, and the stone must be sawed according to the requirements of the landscape.

3. Joining and bonding.

Sawing the stone is carried out with a cutting machine or hacksaw, or it can be done by hammering and leveling. It is then bonded with cement or cement, or other adhesives.

4. Pattern and staggered.

A pot of landscape bonsai requires that the stone texture be roughly consistent, so that the landscape picture is more uniform.

The difference of the stone itself, so under the premise of choosing the natural lines of the texture, sometimes it is necessary to sort out some stones with inconspicuous texture or large texture differences.

Pattern is generally carried out by picking, digging, knocking, sawing, depending on the soft and hard nature of the stone, if there is a texture that can not be sorted out, it can be used to roughly color the same stone for staggered splicing, forming a large block of obvious concave and convex phenomenon, to achieve the requirements of landscape unity and vividness.

The method of making artificial rockery is as follows:

Step 1: Make a model.

First of all, it is necessary to shape the model according to the design effect drawing, so that the design idea becomes a physical image, so as to facilitate the work and further improve the design plan. For the plastic mountain project, two sets of models should be made, one set should be placed in the on-site work shed, and one set should be decomposed into several small pieces according to the model coordinates as the basis for the construction of the mold. And use the horizontal and vertical coordinates of the model to draw the formwork envelope diagram and the hanging stone part to indicate the position and quantity of the reserved reinforcement.

Step 2: Foundation construction.

According to the bearing capacity of the soil of the base and the weight of the mountain, its size is determined after calculation.

Step 3: Steel skeleton modeling.

Steel skeleton modeling includes pouring reinforced concrete columns, welding steel skeletons, bundling modeling steel bars, covering steel plate mesh, etc. Among them, the modeling steel frame and the cover steel plate mesh are the key to the effect of plastic mountain.

First, the purpose is for modeling and hanging mud. The steel bar should make natural concave and convex changes according to the shape of the mountain. When covering the steel plate mesh, it must be tightly tied with the modeling steel bar, and there can be no floating phenomenon.

Step 4: Batch the surface layer.

Lay the bottom first, that is, plastering twice on the steel mesh, the material ratio is cement + yellow sand + hemp knife, of which cement: sand is 1 to 2, yellow sand is 10% of the total weight, and the appropriate amount of hemp knife. The water-cement ratio is 1 ratio, and the layers are not added with yellow mud and hemp knives.

Step 5: Surface finishing.

The surface is further delicately carved on the surface of the plastic body to carve the texture, color, texture and surface characteristics of the stone. The texture and color are adjusted into mortar according to the design requirements with stone powder and toner in appropriate proportions with white cement or modified cement, and treated with rough, smooth, brushing and other surface shaping techniques.

1. Determine the size of the chassis, draw the plan of the garden, and then fix the plan on the foam board with double-sided tape (do not stick it very firmly, and take it off at the back).

2. Dig out the pond with a carving knife, remove the floor plan, remove the rockery, and spread grass powder in other areas.

3. According to the shape of the rockery, cut the foam board from large to small, glue it layer by layer, and make it into a rockery.

4. Spread grass powder on the rockery, and the exposed white can be painted with gray pigment.

5. For the pond part, replace it with water-textured paper or paint it, and place some small buildings to enrich the scene.

6. Add details, add some pebbles, and make some lotus leaves and lotus flowers with ultra-light clay.

7. Place some tree models, and a simple landscape sketch will be made!

Burn the discarded foam box, pave it with cement, make a rockery, and I took it when I saw the finished product, I was too talented.

The method of making the foam rockery is as follows:

1. First prepare a large piece of foam.

2. Then cut it into small pieces with a knife.

3. Next, start coloring, and use a brush to brush up the pigment after it is matched.

4. Then put it in the room to infiltrate and dry it naturally.

5. In this way, the foam rockery is made.

It should be noted that foam is non-degradable garbage, and it should be reasonable after use.

A rockery is a mountain that is constructed with earth, stone and other materials for the purpose of landscaping.

The rockery has a variety of landscaping functions, such as constituting the main scenery or terrain skeleton of the garden, dividing and organizing the garden space, arranging courtyards, revetments, slope protection, soil retaining, and setting up natural flower platforms.

It can also be combined with garden buildings, garden roads, sites and garden plants to form a rich and varied landscape, so as to reduce the artificial atmosphere, add natural interest, and integrate the garden architecture into the landscape environment. Therefore, rockery has become one of the characteristics of China's natural landscape garden.

The most fundamental principle of rockery art:

What is true is false, and what is false becomes true". The natural landscape is the artistic source and basis for the creation of rockery. Although the real mountain is good, it is rare to visit it often.

The rockery is arranged near the residence, as a work of art, more generalized and more refined than the real mountain, which can contain people's thoughts and feelings, so that it has the charm of "a piece of mountain, an inch of stone".

The artificial rockery must be hard to find no traces of artificiality, which makes it difficult to distinguish between the real and the fake. The rockery, which is in the same vein as the traditional Chinese landscape painting, is expensive in that it seems to be true but not true, although it is still true, it is intriguing.