Commander Mido 3 months is almost 6 minutes

Reasons and solutions for inaccurate watch time:

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the special repair shop for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and send the watch to a special maintenance point to check the power or replace the battery.

3. Having been beaten or impacted. The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems, so it is recommended to go to a special repair shop for testing.

4. Maintenance is required. Lack of oil or wear and tear of internal parts of the movement may cause time problems, which need to be serviced and sent to a designated repair point for maintenance services.

5. Under the influence of ambient temperature, the watch is magnetized: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error.

Sending the watch to a designated repair point for professional inspection and adjustment can restore the watch to the normal error range.

Note: 1. Mechanical watches vary according to the model and manufacturing quality of the movement, and the error of the general watch within 30 seconds per day is within the normal range. Some of the higher precision movements can reach around 10 seconds.

2. Generally speaking, the accuracy of quartz watches is high, and the Swiss standard is that the monthly error is within 15 seconds. Some precision movements can be within a few seconds per year.

The international standard stipulates that the daily error of ordinary mechanical watches is plus or minus 30 seconds, and the error is calculated according to 24 hours as a cycle, and cannot be accumulated, it is recommended that you can re-adjust the time to the correct time, wear it normally, observe for 1-2 days, and see if the error of 24 hours a day is within the normal range, if it exceeds the normal range, you need to go to the brand after-sales service point for testing and maintenance.

You can go to the after-sales service to see, Wanling Hui has an after-sales service, don't go to those small repair shops for maintenance. After-sales service not only has professional technology and precision instruments, but also has more high-quality service and first-class system. It will not be messed up with other repair shops at all, and you don't have to worry about the quality of watch repair - 1 year extended warranty.

Summary. The price ratio of Mido watches is quite high, and the configuration of men's mechanical watches of the same price is much better than that of other brands, and it is worth entering. The Mido Commander series is a classic Mido series, and in 18 years, there was also a commemorative model of the Commander series centennial calendar, and now there is a large calendar**, the more I look at it, the more I like it, and I am ready to start.

I like the anthracite gray model, which is very beautiful, the sunburst satin dial is simple and neat, and the date window is more open in the same price range, looking atmospheric. As for the specs, it's powered by the Mido Caliber 80 automatic mechanical movement with an 80-hour power reserve, a sturdy sapphire crystal and a durable PVD anthracite-plated stainless steel body.

Hello, I have seen your question and am sorting out the answer, please wait a while.

The price ratio of Mido watches is quite high, and the configuration of men's mechanical watches of the same price is much better than that of other brands, and it is worth entering. The Mido Commander series is a classic Mido series, and in 18 years, there was also a commemorative model for the centennial of the Commander series, and now there is a big calendar**, the more I look at it, the more I like it, and I'm ready to start. I like the anthracite gray one, which is very filial piety, the sunburst satin dial is simple and neat, and the date window is also more open in the same price range, looking atmospheric.

As for the specs, it's powered by the Mido Caliber 80 automatic mechanical movement with an 80-hour power reserve, a sturdy sapphire crystal and a durable PVD anthracite-plated stainless steel body.

It is a good choice to start or send a male friend or relative.

Is it okay for the Lady Commander series.

The watch is that.

This one is under your post.

The reputation has always been good, and it belongs to the high-end entry model in the mechanical watch, which is more temperamental.

Summary. There are three reasons for inaccurate time:

First, the power is insufficient.

The power required by the watch is not the same, like a mechanical watch, it relies on the shaking of daily wear to store power, if you don't wear it for a long time, there is no power, then the watch will definitely stop or slow down. The manual one needs to be wounded up and down from time to time, and some rely on electronics to maintain rotation, so if the watch is inaccurate recently, it is likely that the electronics are out of power and need to be replaced.

2. External interference.

This is whether you pay attention to it when you wear it daily, for example, watches are relatively squeamish, waterproof, anti-magnetic, and shock-proof, if you don't do a good job, it is normal for the watch to be inaccurate. If you wear a watch that cannot be worn for strenuous exercise, and you wear it to play golf or badminton, the strong vibration may cause damage to the parts inside the watch, and the watch will not be accurate.

In addition, it is a cliché that watches are afraid of magnetism, if your job is to engage in some research things and need to be in frequent contact with large electronic devices, then try not to wear a watch, because the magnetic field existing around it will disturb the normal walking of the watch. Some people say that the watch is bought to wear, and the baby is not good every day, so why buy it? That's true, but you should also be careful when wearing it.

Mido Commander is minus 5 degrees, why is it slow.

There are three reasons for the inaccurate time: First, the power required by the watch is not the same, like a mechanical watch, it relies on the shaking of daily wear to store power, if you don't wear it for a long time, there is no power, then the watch will definitely stop or go slower. The manual one needs to be wounded up and down from time to time, and some rely on electronics to maintain rotation, so if the watch is inaccurate recently, it is likely that the electronics are out of power and need to be replaced.

Second, the external interference of Xiangliang collapse This is whether you pay attention to it when you wear it daily, for example, the watch is relatively squeamish, waterproof, anti-magnetic, and shockproof, if it is not done well, it is normal for the watch to be inaccurate. If you wear a watch that cannot be worn for strenuous exercise, and you wear it to play golf or badminton, the strong vibration may cause damage to the parts inside the watch, and the watch will not be accurate. In addition, it is a cliché that the watch is afraid of magnetism, if your job is to engage in some research things, and you need to often connect the keys to touch large large electronic devices, then try not to wear the watch, because the surrounding magnetic field will disturb the normal walking of the watch.

Some people say that the watch is bought to wear, and the baby is not good every day, so why buy it? That's right, it's round, but you should also pay attention when you wear it.

Third, the proper maintenance of the watch is more precise, the spine back to the small parts is also more, the parts fit each other in order to operate normally, so that the haul is indispensable to stop the branch friction, so the watch is oiled, after a long time Sakura Heng hunger will inevitably dry up, plus or there are some impurities into the watch, so it will lead to the watch is not accurate, at this time you have to go to maintenance, clean up the watch.