Is it better to add glue to lime powder or scrape putty powder? Which one comes out with better resu

It is best to choose putty powder for scraping putty in decorating a house, because from the perspective of environmental protection or performance, putty powder will be much better than lime powder and glue, and the effect of wall brushing is completely different, but it is difficult to brush putty powder, so you must ask the more experienced master, if you don't brush it well, the wall will crack, so many people will say that putty powder is not good, in fact, they are not sure that they can brush putty powder well, If you paint it well, the walls will be very smooth and will brighten the room by a few degrees. <>

You should find that some walls are easier to bump and bump, in fact, the main reason is that the wall is too soft, and this situation, most of them are caused by too much lime powder, maybe they did not adjust the ratio of lime powder and water when painting the wall, so it will cause this phenomenon, and the wall is particularly easy to crack, but it should be noted that putty powder can not be used with other putty on the same construction surface, because it is likely to occur chemical reaction or color difference, So we must pay attention to this. <>

It is recommended that you must buy some of the best when choosing putty powder, because we are household after all, if it is a factory, you can choose medium quality, I think it is best to choose brand materials for decorating the house, because the quality of big brands will be assured, and formaldehyde may be much better, we should all know that formaldehyde is very harmful to our human body, and when we buy latex paint in the later stage, we should try to choose a big brand, because latex paint actually has many kinds of prices, There are dozens of hundreds, or even thousands, you can choose according to your own needs, but I think that since it is a household, at least you should choose a medium and upper class**, generally good things** may be slightly more expensive, but the decoration of the whole house latex paint is not much, so there is no need to save money in these aspects. <>

Personally, I think it is better to add putty powder to lime powder; Lime powder and putty powder have a better effect, and it is also more environmentally friendly.

Adding putty powder can make the lime powder more delicate, and it can also make the decoration effect better. The effect of putty powder decoration is more delicate, and the walls will be smoother.

I think the effect of using putty powder is the best when scraping the wall, and the ratio of ten waste powder and glue is not good, and the effect of scraping out is very unsightly.

Which is good for old powder plus glue and putty powder, hello recommend old powder, 1. Old powder is also called double fly powder, its main ingredient is talcum powder, which has strong adsorption and water absorption, so it is widely used in the second renovation construction of old houses. In the process of use, 801 glue is generally added to mix and use, and the glue generally contains methyl leucaldehyde, so the environmental performance of old powder is generally worse. 2. Putty powder is a thick slurry water-based coating, the main ingredients are talcum powder and natural vegetable rubber powder and other binders, which will be better than the old powder in terms of environmental performance, because putty powder only needs to add water in the process of use, so it will be more environmentally friendly.

Putty powder can generally be divided into exterior wall putty powder, interior wall putty powder, waterproof putty powder and so on according to the different uses of the coarse bridge. 3. Putty powder is generally cement-based, and if the cement-based wants to be thoroughly dried, it generally takes more than seven months. However, the wall scraped out by putty powder is generally harder.

4. Putty powder is generally easy to scrape very thin when scraping construction, while old powder is generally not easy to scrape thinly when scraping construction. In terms of firmness, the firmness of putty powder will be worse than that of old powder with glue, so most people use old powder to carry out batch scraping construction of old house walls. I hope my answer is helpful to you, and finally I wish you good health and a happy mood again!

Many owners will encounter such a problem in wall decoration, do you need to add glue to scrape putty? The owners of many building materials stores say that there is no need to add glue, and there will be formaldehyde if glue is added, and many putty powder products on the market can be used by adding water and stirring in accordance with the required proportion.

However, on the list of decoration materials, many masters will put forward the request to buy glue, which makes many owners confused, whether to add glue to putty powder? Don't buy 10 yuan of cheap putty powder, add glue and the whole house is formaldehyde!

Is it better to add glue or water to putty powder?

Under normal circumstances, the best putty powder does not need to be glued, and there are many kinds of putty powder on the market, and the quality and quality are quite large. If a putty needs to add other accessories such as white latex, whether it is for more robust, better quality and other high-sounding reasons, there is only one essence - the quality of this putty powder is not good! Adding water can not reach the most basic quality standards, the decoration master is worried about problems, so you need to add glue, and you need to add glue to ensure that the putty powder does not fall off, which is more than 7-10 yuan per package.

The unit price of qualified putty powder is more than twice that of low-cost putty powder, ** generally more than 20 yuan per package, in the decoration construction, directly according to the standard proportion of water, no need to add glue, scraping putty to add glue is not standardized, but in the decoration industry such a phenomenon is very much.

The essence of putty powder is a leveling material, not a binder material, if the putty powder itself is a two-component (glue and putty), it is strictly forbidden to add water. The phenomenon of adding glue to cheap putty powder is also because most owners buy putty powder, and the purchased putty powder is relatively cheap and of low quality, so workers have to add additional glue in order to ensure the quality of construction. Therefore, it is recommended that the owner try to buy high-quality putty powder, and at the same time, the decoration master should also start from the perspective of environmental protection and health, so that the putty powder does not add glue.

How many times do you need to scrape putty powder? Three times! Three times! Three times!

This needs to be determined according to the flatness of the wall, generally the wall of the new house is relatively flat, and it can be brushed twice; If the wall is not flat enough, you need the master to fill it with plaster and scrape it three times.

The first time the putty is scraped mainly for leveling and priming, which can cover the defects of the wall; The second time the putty is scraped mainly to repair and see what unevenness the wall has; The third time to scrape the putty only needs to be leveled locally, only the putty surface is smooth and flat, which is conducive to the adsorption of latex paint, and you must wait for the last layer of putty to dry thoroughly before scraping the putty for the second time.

If the putty layer is too thin and the thickness is not enough, it is easy to penetrate the bottom when grinding; If the putty on each course is too thick and dries slowly, it will be easy to crack and bulge in the future! Therefore, on putty, do not exceed 1 mm once, and 3 mm three times, but the putty powder should not be brushed too thickly, too thick will crack.

So really don't ask the putty powder whether to add glue or putty on the appropriate question a few times, and clearly tell you that putty powder does not need to be glued, formaldehyde is not environmentally friendly, put an end to 10 yuan putty powder! Do you have putty powder with glue at home, let's talk about it quickly.

There is no need for the putty powder itself to contain glue powder. The glue contains formaldehyde, which is commonly known as a humectant. Then add glue to waste man-hours and money.

No need At present, the putty powder on the market is basically finished putty, and there is no need to add glue, just add water and stir when using. In addition, it is best to use gypsum putty powder, which is more environmentally friendly, and has high bonding strength and coarse content, and is not prone to hollowing, cracking and other phenomena. Precautions for the use of putty powder 1. After the putty powder is scraped and sold, remember to clean it up in time and keep it clean.

2. For hardened putty powder, it cannot be reused with water. 3. The putty powder that is not used should be stored in a dry place, so that it is not easy to appear caking and deterioration. 4. When adjusting to the greasy town powder, you can adjust it to water, and do not use water with harmful substances.

Dear, I am glad to answer for you: Generally speaking, the better putty powder is water-based coating, water-based coating is a very environmentally friendly product, as long as you add water when using it, you can use it directly. If it is a large area, you can add water, and at the same time you can add a little white latex, and it is more difficult to polish if you add more.

Generally speaking, the effect of scraping out putty with glue is also very good, but you must know that the putty contains glue powder, and you only need to add water and stir it to use.

Interior decoration is not a simple thing, before the house decoration some owners will visit the construction site of the neighbor's house, some owners will find that when scraping putty, some construction personnel will add glue to the putty powder; Some construction workers add water to the putty and stir it directly after scraping, so do you need to add glue to the putty powder? Next, I will briefly introduce it to you.

1. The putty powder that needs to be glued is the traditional putty powder, such as talcum powder, cooked rubber powder, double fly powder and so on. The traditional putty powder itself does not have the cohesiveness, so in the process of construction and deployment, it is necessary to add glue for stirring, if the mixing ratio is out of balance or the mixing technology is not good, it will affect the difference in the adhesion of the putty layer, and affect the quality of the project.

2. Nowadays, the putty powder on the market is mainly finished putty, and we only need to add water to make it into a suitable consistency when using the finished putty powder, and there is no need to add glue. The finished putty powder is standardized production, which can ensure the quality of construction to the greatest extent, and its operation is simple and convenient, but it is not suitable for long-term storage.

3. When you buy putty powder, try to choose finished putty powder. When purchasing, you can weigh the putty powder, usually a pack of putty powder weighs 20kg, and some small manufacturers will cut corners, only 18kg or even less. When you buy putty powder, try to buy it in hypermarkets or specialty stores, most of the brand manufacturers' products will have anti-counterfeiting logos, we can call ** to check the authenticity of the product.

4. When we buy putty powder, we can take a look at the sample and try to choose a product that is white and delicate, free of impurities and no peculiar smell. In addition, you can ask the developer for the quality inspection report, the real quality inspection report will have the scope logo or certificate of conformity affixed by the company, and stamped with the company seal. You can also see whether there are some implementation standards on the outer packaging of the product.

Summary: Regarding whether putty powder needs to be glued, I will briefly introduce it to you here. I hope that after reading this article, I can provide you with reference and help when buying putty powder in the future.