How to remove the grease from the white wall of melamine, what are the tips?

Whether it is scraping putty or melamine, it will be a big annoyance for families with naughty children. Children are willing to play and often make a mess on the wall, and even if they are not careful, they may even get oil stains. When this happens, the best thing to do is to wipe it with a damp towel.

You don't have to put anything on it, and there may be a mark of water penetration at first, but if you can wipe it off, you won't be able to see it after a while. If you can't wipe it off, it is recommended to put some toothpaste (white), the effect will be better. This method is not only suitable for scraping melamine walls, but also for ordinary large white walls.

1. Wet towels and toothpaste for ordinary home decoration generally do not use wallpaper, and if you shave it well, there will be no decoration. This type of wall is generally all white, giving the overall feeling of simplicity. After scraping putty and melamine, the same effect is true.

However, this kind of wall has a potential drawback, that is, it is easy to get dirty. Children's footprints, pencils, mosquitoes, and all kinds of oil stains can cause the walls to turn black.

If it is a freshly oiled stain, it is recommended to wipe it with a damp towel immediately to quickly wipe it off. As for the water on the walls, the color difference left behind will slowly recover. If you still can't get it off, you can try using toothpaste.

Toothpaste has a large amount of active agent, which can play a role in decontamination. Find a cotton cloth and cotton ball, dip it in some water and wipe it with toothpaste.

2. Other stained toothpaste is very effective for removing oil stains, but frequent use of toothpaste is inevitably a bit wasteful and very troublesome to use. There is another way at this time, and that is the eraser. Although the eraser does not have such a strong grease removal effect, it is characterized by a good and convenient stain removal effect.

The "dirty" here refers to ordinary dirty things.

For example, shoe prints, black mud, and the walls will change color when they are put on them. It's quick and easy to use the eraser, even if it's a large slice, you can do it in a few minutes. The ** of the eraser is also very low, and it can be used for ordinary learning, and five cents a piece can be used for a long time.

3. It's good that white shoe polish can be wiped off, but if it can't be wiped off, we can't let the stain remain on the wall. After all, there are still guests at home, and it will be embarrassing to see it. If you have obsessive-compulsive disorder, it will be uncomfortable to watch.

At this point, you can use fine sandpaper and sand it slowly. Grind off a layer of black dots from the surface and brush with a coat of white shoe polish.

When you apply shoe polish, you don't have to worry about getting other colors. White shoe polish seems to be white, but in fact it is colorless shoe polish, of course, there is a certain "color change", you can ask the merchant before buying, whether it is colorless shoe polish. At the moment, my most common method is toothpaste, which works best.

You can use sandpaper to sandand and then brush some latex paint to cover up. It can also be wiped off with a damp cloth dampened with detergent, or with a towel moistened with toothpaste and water, which can work well. You can also use some plaster and rub it on top of the cloth to apply it to the wall.

When removing oil stains, you can choose some organic solution, then wipe it, and finally wipe off the traces with a towel and cover it with wall repair agent or latex paint. can play a very good role.

Scraping grease on melamine white walls can be removed with white vinegar and detergent. Mix the white vinegar with detergent, then find a rag and apply it to the wall, and wait for the wall to react for a while, and then you can easily remove it with newspaper.

Wipe with a damp cloth, you can put some dish soap, laundry detergent, disinfectant, etc. on top of the damp cloth, wipe it first, and then wipe it with dry cloth paper.

Vinegar, detergent, boiling water method: Pour boiling water, vinegar and detergent into a basin and stir them well. Soak the cloth in the mixture and wring it out until it is semi-dry.

Apply the mixture on the rag to the oil stain on the tile, and let the mixture sit on the oil stain for a short while. Then gently wipe off the surface powder with a dry cloth. If the oil is deeply immersed, it needs to be sanded and repainted with the same color paint to cover the area.

Be careful to use a small soft brush, not a roller brush. Because the roller brush not only wastes paint, but also the roller brush that soaks the paint has a certain viscosity and <>

There are many very thick stains, you can spray more. Wait for 10 minutes, then wipe with a rag, it will be easy to wipe off, and finally remember to wipe both sides repeatedly with clean water to wipe off the remaining detergent. This is a method and the most practical and common in the family.

Turn the hair dryer on the hottest mode. Blow on the oil stains, and you can blow for a longer time in the stubborn areas, so that the oil stains can be heated. Wipe it gently with a rag to clean it.

You can directly use a wet wipe dipped in baking soda to make a circular motion in the area with more oil stains, and then slowly wipe it off. Or mix baking soda and vinegar, spray on the surface of the oil stain, wait for 10-15 minutes and wipe it clean, or put a clean rag in the mixed Huiwan air liquid, wring it until it does not drip and then wipe the wall. , and then it is easier to wipe it clean.

If the temperature is cold, you can try to blow the surface with a hair dryer and then do the above steps, the effect may be doubled.

It can be cleaned with products that can effectively remove heavy oil scale, and I like to use a product that is the oil nemesis of Blue Moon, with good cleaning effect, and humanized design, which is also very convenient to operate. When cleaning, the diluted hydrochloric acid can be dropped on the brick joint, and many small bubbles will emerge from the hydrochloric acid. After a few seconds, gently brush the brick joints with a brush to easily remove the dirt from the brick joints, and finally, rinse the ground with clean water.

You can go to the simple state only to remove these places, you should buy some white powder to cover the wall, it is very convenient and simple, after all, these oils may penetrate a little deeper, so when you find it, you should remove it in time.

First use a scraper to scrape off all the floating wall skin, and then spray some water and scrape off the grease on it with a scraper.

I think you can mix the dish soap with baking soda and liquor with water, and then spray it on the wall and Zen surface, so that it can be well removed, or buy something on the Internet to talk about the vertical dust door, and it can also be well removed.

Scrub it carefully first, then scrub it on the wall with detergent, and then use a dry towel to clean the dirt on the wall, and that's it.

I said that you can find a sandpaper to polish it first, and then find some paint and apply it again, so that you can avoid color difference.

You can use a special spray to remove the oil, spray it and wait for a while, and then gently wipe it with a rag to change the base knowledge, which will not leave any traces, you can try it.

1.Removal of animal and vegetable oil stains Animal and vegetable oil stains are common stains on clothing, which should be wiped or brushed with solvents such as gasoline, perchloroethylene and other organic solutions. When brushing, use a towel or cotton cloth to absorb the wiped stain solution in time to remove it from the surface of the clothing.

Prevent some of the stains from remaining on the surface of the garment after the solution has evaporated, which can cause marks on the surface of the garment. This stain should be cleaned in time. 2.

Removal of butter stains Butter is viscous animal fat, which can be scrubbed with toluene or carbon tetrachloride solvents, and the traces left can be removed with a mixture of alcohol and ammonia, or with alcohol soap. 3.Removal of machine oil stains For light-colored machine oil stains, you can use gasoline to scrub them, and then put a piece of cloth on the top and bottom of the clothes oil stain and iron the slag with an iron to make the oil further evaporate and be absorbed by the cloth.

Finally, wash with detergent and rinse with clean water. Dark-colored machine oil stains must be rinsed with high-quality gasoline, then ironed with blotting paper or cloth to absorb, and finally rinsed with warm water. 4.

Removal of candle oil stains Candle oil stains on clothes cannot be washed alone. To rub off the wax on the surface of the clothing by hand, and then use blotting paper or paper with strong adsorption to pad the upper and lower parts of the stain and then iron it with an iron, the candle will melt when heated, and the melted candle oil will be absorbed by the paper.