-
1.If there are snaps on the back of the skirt, you need to unfasten the snaps first to detach the skirt from Barbie's body.
2.If there are no snaps on the back of the skirt, but there are stitches, you can gently remove the skirt along the stitches. Be careful not to pull hard when dismantling, so as not to damage the fabric and Barbie's body.
3.If the skirt is sealed and cannot be untied or removed properly, you can use scissors or thread pickers to pick the stitches one by one. Note that it is also necessary to operate gently, so as not to damage the cloth and Barbie's body.
-
If there is a snap button on the back of the doll skirt, just open the button. If the back of the skirt is sealed, you can use scissors or a thread picker to slowly pick the thread, and the clothes will be taken off after picking it open, and then you can change the back of the skirt to other buttons. There is also a way to take off the skirt without damaging the skirt, that is, you can pull off the doll's arms, blow it with a hair dryer for a minute before pulling, and it is easy to pull it off after softening, and it is very easy to take off the skirt after pulling it off, and then put the arm on, and the same method before the doll is used!
-
The clothes on Barbie's body are all sticky on the back, and if it is the kind of clothes that pull over the head, you need to pull the head off.
-
Here's how to make a skirt for Barbie:Tools Raw materials: a piece of cloth, needle and thread, hot glue.
1. First of all, I can prepare a piece of cloth and fold it in half.
2. Then sew a rope on the edge of the cloth.
3. After sewing, put on a skirt for Barbie and measure the size.
<>4. Then prepare another piece of cloth and stick it to the top of the skirt to make a belt for the skirt.
5. Then sew a clasp with a needle and thread at both ends of the belt.
6. Then sew the opening of the skirt with a needle and thread.
7. Finally, put on the finished skirt for Barbie.
-
1. Prepare tools such as cloth stuffing, needlework, scissors, etc., choose a piece of cloth with elasticity, trim the top of the cloth into a square, the length and width should match the size of the doll, and the remaining part should be sewn with needle and thread.
2. After folding the fabric in half, sew the upper part of the side of the ante beam, and fold the fabric in half after sewing, and then fold the fabric in half, at this time, the four layers of fabric are neatly stacked together.
3 Use scissors to cut a corner on the left and right sides to make the garment appear suspenders, sew the shoulder straps, and sew both sides after aligning the wax faces.
4 Arrange the front of the skirt with the hem naturally open, cut it off after aligning the two sides, sew the sides, turn it over to the other side and sew the lace seams to complete it.
Barbie (Barbie) was invented by Ruth Handler, held on March 9, 1959 at the American International Toy Fair (American International Toy Fair) for the first time**, Barbie is the most widely known and best-selling doll in the 20th century, Barbie and other related accessories are made in a scale of one to six, the largest size of the dollhouse model, also known as playscale.
The Barbie doll copyright is now owned and produced by Mattel and has been sold to more than 150 countries around the world, with a total sales of more than 1 billion yuan, and has derived a series of film and television works, mini-games and peripheral products.
-
Here's how to make a Barbie dress:
First, cut the pink mesh material into three pieces of decreasing length, the width of the fabric is the same about meters, and the length can be reduced according to your preferences, such as 30 cm, 25 cm and 20 cm. The skirt stiff mesh is a little shorter than the longest skirt, and here you can choose to cut it by 28 cm.
2. Trim both sides of the cut mesh yarn, and use the reduced waste to make a blouse lining for Barbie, which can also be understood as underwear.
Third, here we directly glue to the upper body of the doll one by one. In this way, the doll will not be exposed to lace tops again.
Fourth, take a beautiful piece of lace fabric, the rose embroidery pattern selected here, and make a blouse for Barbie. Start gluing from the back of the doll and end in a circle. Then fold it from both sides of the waist of the front doll and fix it directly with glue.
The excess fabric is cut out so that we don't have to move the needle, and our blouse is ready.
Fifth, the hard mesh is sewn flat, and the folds of the skirt are pulled out, just enough to wrap around the waist of the doll, and then the skirt can be directly connected with the finished top with glue.
Sixth, the next step is to make the skirt, the pink mesh we cut before is three decreasing pieces, so the skirt made is also three decreasing layers. Flat-seam each piece of mesh and pull out the folds to form the shape of a skirt.
7. Attach the three sewn skirts layer by layer to the bottom of the doll top, and put the longest one at the beginning, which can be sewn or glued, depending on personal preference. Then there are the decreasing two.
8. Add decoration, and the doll's waist can be fixed with three circles of pearls to form a pearl belt. The back of the doll can also be decorated. The rest of the decorations can be played freely, such as the hairstyle of the Barbie doll.
Such a simple Barbie dress skirt is ready.
-
How to make Barbie's skirt.
You are searching for Barbie paper patterns, or go to ** to buy a copy, it will only cost 1 or 2 yuan, and you can do it according to the cut.
How to make a Barbie doll skirt specific tutorial.
You can refer to the clothes worn by the red carpet actresses at the Golden Globe Awards, all kinds of them, all over the world.
I often make Barbie clothes, so I'll just follow my method :
1: Find a piece of fabric that satisfies you;
3: Turn Barbie's ordinary clothes over and see how they are sewn (it can be sewn more realistically);
4: Roughly compare it on Barbie, cut the fabric, and then start sewing;
5: When sewing, pay attention to reverse sewing (that is, turn the front of the fabric into it, and pay attention to trying it on Barbie when sewing, so as not to fit it or sew it directly on Barbie);
6: Pay attention to turning the clothes over after sewing (it is best to sew the elastic fabric with a hook and loop, so as not to wear it or tear the fabric when changing).
Precautions: The clothes should be in accordance with the proportions of the Barbie doll, and the stitches should be small when sewing.
As for the hat, I make it out of paper, and if you don't feel good, you can add a layer of cloth to the outside, otherwise it will be too soft.
How to make a dress that Barbie wears**.
Go to the Internet to search for baby clothes tutorials, a lot.
How to make Barbie's skirt, 20 points to look good.
Kawa clothes bar, or handmade guest has a lot of simple tutorials made by bar friends themselves, quite detailed, you can take a look.
Ask how to make Barbie clothes, skirts or Barbie dolls of various things (to process **)!
I recommend a place for you, go to the post bar, the Kawa clothes bar and the Kerr doll bar (boutique stickers), where there are rich tutorials to learn.
How to do Barbie dress skirt handwork.
See for yourself. How to make a cute tutu dress for Barbie.
Use some hairpins, coil up half of your hair, and then make a hairpin on top of it, and wrap the rest of your hair into a curl or a small braid on each side with something, and that's it
How to make a Barbie princess dress.
You can check it out at Princess Barbie's post bar.
How to make a dress for a Barbie doll out of cloth.
Learn to make cloth skills first.
How to make a skirt Barbie.
Cut the cloth according to the figure of the doll, and then sew it on the doll's body, pay attention to the back to leave more fabric, cut it, and sew it with Velcro.
Mascara, brush up and down, eyeliner, you can draw a little under the bottom of the eyeliner eye facing the black pupil to create a jet-black round pupil effect. >>>More
In the case of Barbie dolls, the main features are that the facial features are more three-dimensional, the eyes are larger, and you can dress yourself closer to Barbie through makeup. For example, you can apply a little more highlight to the base of the nose to make the nose appear three-dimensional, and you can also apply a little more shadow to the face to make the face three-dimensional. You can also cover the corners of your mouth with liquid foundation to make your mouth look smaller. >>>More
To remove blackheads completely, it will take at least a month, blackheads are formed by dust and oil for a long time, and there is no need to worry, open the pores with hot water every night, and suck out the blackheads with a nose sticker.
Use your limited life to create your own wealth!
Grasp your youth, you need to know that time is gone, and learn something while you are young! >>>More
System prompts"You may be a victim of software piracy"to get a solution. >>>More