Compared with epoxy colored sand and beauty sewing agent, which caulk has a longer service life?

When decorating a house a long time ago, when choosing a way to deal with the gaps in the tiles, that is, sewing the tiles directly with white cement, the master mason will sew them well. Later there was dealing with Pythagoras.

way, this way is more advanced and better decorated, so everyone chooses Pythagoras. With the development of various technologies nowadays, beauty sewing and epoxy yarn appeared, among which beauty sewing is made of resin and hardener.

Composition, the beauty of sewing construction is also very convenient, as long as there is a little patience, direct operation can be completed well. Epoxy colored sand.

It is added to the quartz color sand on the basis of unsewn, and the construction method is similar to that of unsewn, but the effect will be more luxurious after the construction is completed, and the overall matte effect will be produced.

If you're on a tight budget, opt for needlework. There's no need to fret. There are pros and cons to each of these three methods.

From the hardness comparison, it can be seen that the unsutured agent "epoxy sand" suturing agent is best to choose the unsutured hardness, and the suture agent is the worst. It can be seen that there are also certain advantages after each upgrade. Therefore, if we pursue hardness, such as laying tiles on the floor, it is best to choose unstitched adhesive, compared with the anti-pollution ability, it is still an unstitched epoxy suing agent, generally the higher the hardness, the stronger the anti-pollution ability.

If it is hard, it is difficult for dirt to penetrate, so it is difficult to get dirty, and if you want to move in later and do a good job of cleaning, suture is naturally the best choice.

The gaps in the tiles that need to be clean and free of dust should be kept dry. Moreover, the glue (which is more tiring and takes a lot of time) has to be sewn after processing, and it has to wait for hardening, etc. The process is more complex and more difficult.

Epoxy colored sand can be constructed in a humid environment, mixing two groups of AB materials, applying materials to the gaps of the tiles by scraping, scraping treatment, and waiting for hardening. The toilet environment is relatively humid, and the problem of falling off the beauty stick is most worried in the later stage, so from the perspective of adhesive force, the epoxy color sand gap is more realistic, and it has a moisture-proof effect after entering the water, which is not easy to fall off and has a long life.

From its composition, it can be seen that the corrosion resistance, waterproofness and other properties of epoxy colored sand are better than those of unsewn. The bathroom mostly chooses small-size tile construction, and the epoxy sand itself is more suitable for small-size tiles (mosaics) with many intervals.

Beauty plush is more suitable for large tiles such as living room and bedroom floors and wall tile projects. The epoxy yarn itself is very grainy, giving people a visual feeling of scrubbing, and because it goes well with imitation bricks and wood grain bricks, it is very textured.

We must pay attention to two points, one is to combine the house type of your own home, because the house type is different, the designed structural space is also different, and the other is to plan the function reasonably, such as if the space is sufficient, it is best to reserve a shoe change stool, and then leave the middle and bottom of the entrance cabinet empty, so as to fully realize the practicality of the later stay.

The beauty sewing agent lasts longer. The sewing agent is dirt-resistant, moisture-resistant, and hardness, so the service life will be longer.

Both are equally good. Here's why:

1. Consider the environmental protection of the product.

As we all know, water-based materials are relatively environmentally friendly products. The epoxy colored sand is all water-based materials, so the environmental protection of the epoxy colored sand is indeed safer.

However, the current sewing agent is divided into two kinds, that is, it has become a water-based sewing machine and an oil-based sewing agent, and the water-based sewing agent is also very environmentally friendly. It's just that oily products may have poor environmental performance, so everyone should pay attention when choosing.

2. In terms of usage, there is not much difference between the two.

For example, in the construction of epoxy sand mining, after the gaps are cleaned before use, the two groups of AB materials are mixed and stirred evenly, and then the gaps are smeared to realize the gap filling, and then the epoxy colored sand on the surface is cleaned up in time. Finally, it is necessary to wait for curing.

The construction of the joint agent is also the cleaning of the gaps, and then the beauty of the joint agent in the hose is mixed evenly, and the gap of the tile is driven into the tile. It's just that they deal with excess material differently. Personally, I think that the sewing agent is more suitable for you to do it yourself, but epoxy color sand is not suitable.

Epoxy colored sand is good.

How troublesome is the use of the sewing agent, I believe that the heart of the decoration is refreshing, and if you have a sore back and leg pain after half a day, you also need to use it with a glue gun, a sewing ball, a shovel and other supporting tools. The epoxy colored sand is relatively simple, a scraper is enough, and the subsequent cleaning of the overflowed colored sand with a sponge block is basically good.

It is very convenient to use as much sewing agent as you want, even if it is a secondary use, but the epoxy color sand was bagged before, and it should be used after opening, and now it is also bottled, and the waste rate has been reduced a lot, but it is still necessary to estimate how much to use in the early stage to avoid more waste.

Miscellaneous

In view of the different construction methods, the gaps filled by epoxy colored sand are deeper, while the glue gun used in the sewing agent cannot guarantee that the gaps are completely filled.

The surface gloss of the sewing agent is better, and the color will be very beautiful if it is slippery to the touch, while the epoxy color sand is matte, rough, and has obvious graininess. However, at the intersection, the epoxy colored sand is treated relatively flat, and the beauty sewing agent may be concave in part.

Epoxy colored sand good. Epoxy color sand is more practical, the bathroom environment is more humid, and the most worried about the problem of beauty seams falling off in the later stage, so from the perspective of adhesion, epoxy color sand caulking is more real, and after entering the water, it has a moisture-proof effect.

It will not fall off easily and has a longer service life. In addition, from its composition, it can be known that the corrosion resistance, waterproofness and other properties of epoxy colored sand are better than those of beauty sewing agent.

Conservation points

1) Daily cleaning can be cleaned with a soft broom or rag.

2) When the dirt is severe, use a neutral detergent, wash with a rag, then wash with water, dry it thoroughly, and apply a thin layer of wax.

3) When the ground is splashed with acids, alkalis and other chemicals, it should be cleaned with water in time, and if it is a seasoning agent or oil lamp, wipe it with a rag.

4) The smooth coating can be regularly maintained with bright wax to keep it beautiful.

Summary. Hello, very honored with your question, dear

The service life of a qualified beauty sewing product after construction can be as high as several years or even more than ten years, which is not an exaggeration, epoxy color sand is constructed by scraping the way of scraping, and the bonding area and depth in the gap are large and thick, and the beauty sewing agent is constructed by glue gun gluing, and the bonding area in the gap is small and the depth is thin, which will cause insufficient adhesion between the sewing agent and the gap, which is also a lot of users reflect that the beauty sewing agent will fall off after a long time after construction.

I hope it can be helpful to you, and I hope you will give 5 stars to praise, thank you.

Hello, I have seen your question, and I am sorting out the answer, please wait a while Hello, I am very honored to ask your question, pro A beautiful sewing product with a slippery travel grid can be as long as several years or even more than ten years after construction, which is not an exaggeration, epoxy color sand uses scraping blades to scrape the way to let the section of construction, and the gap in the bonding area and depth is thicker, and the beauty sewing agent uses a glue gun to carry out the construction, and the gap in the bonding area is small and the depth is thinner, It will cause insufficient adhesion between the sewing agent and the gap, which is also the situation that many users report that the sewing agent will fall off after a long time after construction. I hope it can be helpful to you, and I hope you will give 5 stars to praise, thank you.