-
When the spider plant has a rotten heart, it is necessary to determine the degree of decay. If the whole plant is found to be rotten after inspection, it is basically impossible to salvage. If it is only partially rotten, the plant should be depotted in time, and then the blackened and rotten roots should be cut off, cleaned and disinfected, and replaced with soil to be replanted.
Be careful not to prune off rotten leaves and keep the plants out of contact with water after pruning.
Cultivation methods and precautions of spider plants.
1. Sufficient moisture.
Spider plant likes moisture and needs to provide it with sufficient water and moist growth environment, which is one of the breeding methods and precautions of spider plant. When cultivating spider plants, it is generally watered once every 2 or 3 days to keep the potting soil moist, and pay attention not to not water for a long time or overwatering the water in the pot.
2. Timely top dressing.
Breeding spider plants should also pay attention to timely chasing Bika water-soluble fertilizer to supplement nutrients for it, so that it can grow strongly. Usually in the spring and summer when its growth is vigorous, it is necessary to carry out topdressing once a month in half a month, and once a month in autumn, and enter the dormant period in winter, it is necessary to stop fertilizer in time to avoid fertilizer accumulation and rotten roots.
3. Sufficient light.
When cultivating spider plants that prefer a semi-shady environment, it is also necessary to avoid direct strong light and provide them with sufficient light, so that the spider plants can better photosynthesize and grow. Generally, shading treatment is carried out in summer and autumn when the light is strong, and the spider plant can be placed in a sunny place to receive scattered light for about 3 hours at the rest of the time.
-
Reduce the amount of watering If the rot and blackening of the spider plant is not too serious, it may be caused by excessive watering, resulting in excessive soil viscosity and poor air permeability, and the amount of watering needs to be reduced, which can be changed from watering twice a day to watering once a day or once every two days, and the moisture of the soil can be alleviated for a period of time, and the rot situation can be improved.
Supplementing nutrients After the leaves of the spider plant appear black and rotten, it is necessary to loosen the soil in time, add a sufficient amount of base fertilizer to the soil, and the fertilizer can choose the diluted rotting fertilizer solution to avoid excessive fertilizer concentration and accelerate the degree of blackness and blackening of the spider plant.
Astigmatism irradiation After finding that the root of the spider plant is black and rotten, it needs to be transferred to the outdoor for maintenance in time and given appropriate astigmatism irradiation. Pay attention to the light should not be too long, give about 2 hours of light a day can meet the growth needs of spider plant, and the blackening condition can also be improved.
-
The spider plant rots from the heart, indicating that the roots of the spider plant are rotten, and there is almost no possibility of life.
-
In this case, he has to throw it away, because his roots are rotten, and now his roots are rotten, and he can no longer live.
-
Is it too much watering? If it is watered too much, you have to recycle, you can take the outside empty for a few days, and then let it dry to see if it can be re-divided, if it is not the reason for watering? It's possible that um, because the roots are broken, that's why he produces this mold, and it rots.
-
It is necessary to clean up the rotten parts of the spider plant as soon as possible, disinfect the roots, and then replant the spider plant in the new soil and place it in a bright environment.
-
In this case, you can prune it and put it on the balcony in a bright and ventilated place where it can sprout and grow again.
-
This should be analyzed according to the situation, and the specific question should be asked.
There are three possibilities:
Insufficient light, long-term indoors, insufficient light, resulting in the inability to form photosynthesis, and the production of chlorophyll is reduced;
2.Poor water control is usually caused by too much water, and should be watered in moderation, not too much;
3.If the fertilizer is insufficient, it is recommended to loosen the soil and search the fertilizer book poorly!
-
In order to solve the situation of spider plant, such as rotten heart and blackening, it is necessary to determine the specific cause of such symptoms of spider plant. If it is caused by too much watering, the amount of watering should be gradually reduced at this time, and generally with the amount of watering greatly reduced, the spider plant will slowly return to its normal condition.
01 Usually when we maintain the spider plant, we need to supplement the nutrients of the spider plant in time, if the spider plant nutrition is insufficient, there will also be a rotten heart and black situation, usually to fertilize the spider plant.
02 Plants need light during their growth, so we should give light to the spider plant in time when maintaining it. Generally in the hot summer through light exposure, this can achieve rapid growth and development of plants.
03 In the process of growth and development of spider plant, if the chronic blackening is more serious, it is necessary to take the spider plant out of the pot, clean the root of the spider plant with water in time, and check whether the root of the spider plant is rotten.
04 Once the root rot of the spider plant appears, if it is more serious, it is necessary to prune the rotten root system of the spider plant in time, and place the spider plant in the carbendazim solution for sterilization and disinfection, and after the wound soaking is completed, change the soil again for planting.
Automobile chassis damage repair solution 1, halfway scratch steam chassis and other parts damage solution (1) When the car is in the field or far away from the repair site and encounters chassis parts damage, for different fault situations, the following first aid methods can be used to drive the car to the place where the car is repaired. (2) The clutch friction plate is ablative and slippery, and the friction plate with less serious ablation can be turned over. If the ablation is severe, several layers of cotton cloth or canvas (the thickness of which should be consistent with the original friction plate) can be used, and steel wire or iron wire can be passed through the hole in the steel sheet to fix it. >>>More
The time for children to change teeth is generally as follows: between the ages of 6 and 13, the baby teeth fall out one after another, the permanent teeth erupt successively, the first molars erupt first at the age of 6-7 years, and most of the permanent teeth come out at the age of 12-13. And your age is 19 years old, and according to what you said is a big tooth, then it is possible that the lost teeth are permanent molars, then your lost tooth should not grow back. >>>More
This question should be put together.
The first problem arises when the soil is very good, that is, it is dry. >>>More
Frostbite should be watered, so that it can slowly come back to life, and then fertilize, this effect is very useful, and can save the spider plant in time.
If you cut it off, as long as the root system is okay, it will grow back later. >>>More