-
If you cut it off, as long as the root system is okay, it will grow back later.
The solution to frostbite from spider plants.
1. Move indoors.
The growth adaptability of the spider plant is very strong, but the cold tolerance of the plant is not strong, if the temperature is lower than 7 easy to frostbite, then how to solve the frostbite of the spider plant, you can cut off the frostbitten branches and leaves on the plant, move it to a warm place for maintenance, if you do not grow new leaves in a short time, it will regrow leaves after the spring warms up.
2. Soil replacement treatment.
The cold tolerance of spider plant is very poor, as long as the root system is not frostbitten, it can recover quickly, if it grows in a low temperature environment for a long time, the root system is more prone to frostbite, at this time it should be treated with soil change, the root system is pulled out of the old pot, and the dead root system above is pruned, and it is re-entered into the soil after disinfection, and it can be quickly fed.
3. See the light in time.
Spider plant likes to grow in a semi-shady environment, if the plant frostbite will affect the photosynthesis of branches and leaves, at this time the demand for light will become larger, it is best to move the plant to the indoor sunny place, not shade for a long time, let the plant bask in the sun, so as to ensure that the leaves are tender and green.
4. Reduce watering.
Spider plant is a common moisture-loving plant, if the frost damage plant growth ability will become sluggish, at this time watering should be gradually reduced, should maintain the principle of watering dry and wet, after watering to loosen the soil, in order to increase the air permeability of the soil, if the temperature is very low should be covered with a layer of plastic wrap, in order to play the role of heat preservation.
-
When the leaves of the spider plant are slightly frozen, the spider plant can be moved to a warm place, but the temperature difference should not be too large, so as not to make it difficult for the plant to adapt to the alternation of cold and heat. Prune off the frozen leaves, and the spider plant will soon return to normal.
When the frostbite of the spider plant is severe, at this time, all the leaves of the spider plant can be cut off, and then the spider plant can be moved to the indoor sunny place, and the temperature difference can not be too different, pay attention to a gradual process. It won't be long before new leaves come out.
How to avoid frostbite of spider plants?
1 Move the spider plant indoors in time.
When the temperature is lower than 10 degrees, the spider plant must be moved indoors in time to avoid strong winds, sudden temperature drops and other factors.
2 Reduce the frequency of watering and the amount of watering.
In winter, the spider plant grows slowly or stops growing, so it is necessary to reduce the frequency and amount of watering, and it is easier to cause root rot when watering too much.
3 Get plenty of light.
In winter, the temperature is low, and sufficient light can make the spider plant more vigorous, which is used to resist the cold and germs.
-
Although the spider plant has solid skin, it is not a very cold-tolerant plant, generally do not let the temperature fall below 0 (or frost), otherwise it is easy to have frostbite, for the spider plant that has frostbite, as long as it is not particularly cold, it can still be saved.
First of all, the flower friends cut off the frostbitten leaves, and then move the spider plant to a warm environment, and it will not be long before new leaves will come out.
If the spider plant is particularly frozen, then it is recommended that flower friends do not suddenly take the spider plant into a warm place to recover, but gradually move to a warm place to recover.
What needs to be told here is that not all spider plant frostbite can be recovered, generally speaking, as long as there is no frostbite root system, there is not much problem, if the root system is also frostbitten, you can only be a dead horse as a live horse doctor.
When the spider plant is maintained in winter, it can be sprayed with potassium dihydrogen phosphate in fertile leaves to enhance the growth.
-
The spider plant has verdant branches and leaves, and is a beautiful foliage plant. It is not easy to raise spider plants well, and it is easy to dry up the yellow leaves if you are not careful, so how to solve these problems. Let's take a look.
In this way, the spider plant leaves are finger wide. Watering some rice waterRice water contains gluten and trace elements, and it is acidic, and it can make the spider plant grow fast and not yellow leaves. Here's how:
Collect the rice water, put it in a plastic bottle, change the lid and put it on the balcony to dry. Generally, it will be fermented in a month, pour out the clear liquid and dilute it with water, the ratio of rice water and water is:, and then pour the spider plant.
Kitchen waste manure collects kitchen waste to make fertilizer by itself, and the effect of fertilizing spider plants is very good, and it is simple to save money. Specific method: Prepare a large idle flower pot and put a centimeter of humus into the pot.
Collect the kitchen waste, such as rotten vegetable leaves, fruit peels, egg shells, fish intestines and fish bones, put them in flower pots, and put them in centimeters, not too thick, and then fill with thick humus soil. Move the pot to the sun and expose it, turn the soil every other month, the month will be fermented, use it to fertilize the spider plant, the spider plant will grow very robust, you can apply it once a week, pour some bean cake water bean cake is rich in nutrients, very in line with the growth needs of the spider plant. Here's how:
Collect the bean cake and crush it, put it in a plastic bucket and add water, change the lid and put it in the sun, it will be made in a month, pour out the clear liquid and dilute it with water, the ratio of fertilizer and water is: After using it for a period of time, the leaves of the spider plant will become wider and wider. But if you want to raise a good spider plant at home, you have to face such a thorny problem, the spider plant is too easy to wilt the tip of the leaf, which not only affects the ornamental value, but also can't find any reason, which is really annoying.
-
Question 1: Why are the leaves of spider plants easy to break? Analysis of the causes of broken leaves of spider plants What to do if the leaves of spider plants are broken The leaves droop and break automatically, which is caused by too weak light and frequent watering.
The growth environment of the maintenance spider plant is mainly semi-shaded, watering should be controlled, because it is a fleshy root system, slightly drought tolerant, control water can make its leaves short and strong, the light should be full of yang in winter, and if the temperature is higher than 26 in other seasons, it should be managed by semi-shade maintenance. Such spider plants will not break and can enhance the appreciation value.
Question 2: What should I do if the leaves of the spider plant are broken in the middle It's okay Lu Que'er I have experience I am the flower manager of the class You give it more water She will live There was a cactus in our class whose leaves were completely yellow, but I still fed them Believe in yourself.
Question 3: Why are the leaves of spider plants easy to break? Analysis of the reasons for the broken leaves of the spider plant What to do if the leaves of the spider plant are broken First, the reasons for the broken leaves.
Leaf breakage is usually caused by too weak light, frequent watering and lack of ventilation.
Strengthen the appropriate light, at this time the leaves will be slightly shorter, but the color is bright, the lines are clear, and the leaves are also straight and not easy to break. Control the water properly, and apply some nitrogen fertilizer and potassium fertilizer. In addition, due to lack of fertilizer, sometimes the leaves will break.
Secondly, we must learn to control watering, because spider plants are fleshy roots and slightly resistant to drought, and controlling water can make their leaves short and strong. Ventilation should also be strengthened during normal maintenance.
Question 4: Can I cut the leaves of the spider plant if they are broken? 10 points can be cut, the vitality of spider plants is very strong. The leaves will not wither after loss, and it is better to trim the shape, which is very good.
Question 5: What should I do if a large number of leaves of Phnom Penh spider plant are crushed and broken by clothes Don't worry about it, when the temperature rises, new leaves will grow to accompany Na Na. Spider plants grow very quickly.
Question 6: The leaves of the spider plant I raise will always break, what is the reason for too much watering and lack of light, which will make the leaves brittle and slender, and they will break if they cannot support it.
Increase the light, and the surface layer of the soil is dry and then watered thoroughly. In this way, the newly grown leaves will be normal.
Question 7: Ask people from all walks of life, spider plants will automatically break off when they raise leaves, what is the reason and what should I do? Lack of lighting, poor ventilation, lack of potassium fertilizer, over-watering, etc., are prone to produce weaker leaves and easy to bend, and you can judge according to your own maintenance.
Question 8: What happens when the leaves of the spider plant are often broken It is estimated that you water it often or the soil is too fertile The spider plant is very easy to raise You don't water it often Proper light will be numbered.
Question 9: What should I do if the leaves of the hydroponic spider plant break off from the middle? 100 points Is pothos spider plant? Pothos is very good to raise, put it in a bright place indoors, change the water once a week, add some nutrient solution is better, the plant does not enter the water too much, question 10: how do the leaves of the spider plant break old? It is indeed the reason for the lack of light, there is appropriate light, and it may be better to give some potassium fertilizer appropriately. View the original post" satisfied.
Frostbite should be watered, so that it can slowly come back to life, and then fertilize, this effect is very useful, and can save the spider plant in time.
1. Lighting problems.
Phnom Penh spider plant prefers a semi-shady growth environment, and too much or too little light is not conducive to its growth. Simple light problems often cause the leaves of the spider plant to gradually turn yellow, lose their vitality, and in serious cases, they may also dry up and die, if the humidity of the environment is affected by too much light, it is easy to cause the tip of the spider plant leaves to turn yellow and black. >>>More
When cultivating goldfish spider plants, sometimes because the light is too strong, it will cause it to lose its leaves. Goldfish spider plant is a plant that likes to be negative, and its demand for light is not high, and it is easy to lose its leaves if it is exposed to light for a long time. >>>More
Plants can be rinsed with cool water for control, and plant pesticides can also be used. 8g pyrethrum soaked in 50g of alcohol to 15 days to form the original solution, before use, add 6 parts of the original solution and 1 part of the dilute soap solution to 20 parts of water and mix well. Or soak 600g of fresh or 300g dried potato stems and leaves in water for 4 hours, filter and spray the infested plants, but some plants cannot be controlled with this solution, such as cacti and fluffy plants. >>>More
Dear, did you water the flowers directly with tap water? My spider plant also has yellow leaf tips, and I found that it was delivered with tap water. It is recommended that you leave the tap water on the balcony to dry for a while.