-
The maintenance personnel said that there is a protective film on the surface of the LCD TV, which plays a role in eliminating the reflection of the LCD screen, and it is not scratch-resistant. Many consumers see that there is some dust on the LCD TV, so they take a wet rag and wipe it vigorously on the screen, which results in the destruction of the protective film applied on the screen, resulting in a blurry display. If you push too hard, it will even scratch the display and let the liquid crystal flow out.
Maintenance personnel suggest that if the public wants to clean the LCD TV at home, they should go to the home appliance store to buy a special screen cleaner and a cleaning cloth with static protection function, so as not to cause unnecessary damage to the screen.
-
Go to the electronic market to buy a bottle of special cleaning solution for the LCD screen, and come with a screen cleaning cloth.
-
The TV screen is dirty and not good-looking, teach you a trick to make it clean easily.
-
1. Turn off the power before cleaning up, safety first.
2. Use a special liquid crystal cleaning cloth or cleaning cloth or scratch-free cloth towel to clean up dust or other dirty things.
3. Do not use too much force when cleaning, so as not to cause the LCD screen to crack.
4. When cleaning, pay attention to wiping the surface of the LCD screen regularly in the same direction, and clean it lightly for the first time, so as not to scratch the LCD screen with dust on the screen.
5. When cleaning, spray the cleaning liquid on the cleaning cloth, do not spray directly on the LCD screen, so as not to enter the inside of the TV.
6. After cleaning, it should be allowed to stand for half an hour, and then power on to remove moisture, otherwise failure may occur.
Note: Pay attention to the following points when cleaning the LCD screen:
1. Never wipe the surface of the screen with any alkaline solution or chemical solution at will.
2. Do not use water and alcohol solutions.
3. Do not use the following liquids and objects as cleaning products: alcohol, Tianna water, dish soap, soap, laundry detergent, coarse fiber cloth, decontamination wax, knives and hard tools.
-
1. How to clean the TV LCD screen.
2. How to clean the TV screen.
3. What to wipe clean when the LCD TV screen is dirty.
4. How to wipe the TV LCD screen.
1.When the TV LCD screen is stained, you can spray an appropriate amount of ion-free water with a special liquid crystal cloth to make the wiping cloth slightly moist, and then wipe it, which can effectively remove the stains.
2.It cannot be cleaned with clean water, the liquid is very easy to drip into the inside of the LCD TV, causing a short circuit in the device, and it cannot be cleaned with alcohol, which will dissolve the special coating on the screen.
-
1. Gently wipe the LCD screen with a paper towel first, the strength should not be too large, the main purpose is to wipe off the dust on the surface of the display screen.
2. Aim the cleaning agent nozzle with the display screen, gently squeeze and spray, and spray the cleaning agent evenly on the surface of the display screen.
3. Gently wipe the surface of the display screen with a soft cleaning cloth, and wipe it in a clockwise or counterclockwise direction during the wiping process.
4. Gently wipe the surface of the LCD screen with a paper towel again after digging the most Xun.
1. If we need to make the screen smaller in a small room, then we can choose the settings after turning on the computer. Click to enter. >>>More
General treatment methods for cracks in the LCD TV screen: >>>More
There are straight stripes, which is caused by the poor contact of the Pingmu cable, because the Pingmu is made of glass and the wire is welded together with two different materials, and this situation will occur after a long time, and the screen needs to be re-pressed! The cost is higher, about three or four hundred yuan.
1. It may be caused by a problem with the signal source or program source, you can check whether the connection line of the signal source has poor contact, or the quality of the connection line is not good, etc., you can reconnect it with another connection line and fix it; If it is a problem with the program source, you can switch to a different channel to solve it. >>>More
Pencil eraser.
Scratched screen areas need to be cleaned before you get your hands dirty, and it's best not to use tap water and mineral water, as there are impurities in the middle of the platform that will damage the screen during the wiping process later. It is recommended to use filtered distilled water, dip a soft cotton cloth or mirror cloth and gently wipe the screen. If you use an old eraser, it will contain pencil slag, which will cause greater damage to the screen. >>>More