How to disassemble car floor glue? How to remove the car floor glue

Remove all the seats, it is easy to take it out, you must have professional tools, otherwise it is difficult to dismantle, it is recommended to go to the place where the car is repaired to dismantle. The role of floor glue is:

1. Prevent the sanitation of the ground in the car from being polluted by liquid, such as the cement gravel brought by the shoes after the rain, although there is a foot mat to prevent it, but in the actual use process, due to the splashing of water, it will inevitably make the ground velvet floor dirty, and it will be troublesome to clean up;

2. If it rains continuously or you buy fish and shrimp in the back row, the bag is leaking, it is difficult to clean, and long-term pollution will also produce peculiar smells, which are difficult to disperse. Therefore, the whole vehicle floor glue, it is very convenient to solve this problem, in fact, the material is artificial leather, after pollution, as long as it is cleaned with a wet rag, the dirt can be quickly removed;

3. Chassis sound insulation, it can effectively prevent the noise of automobile chassis and tires from entering the cockpit, because artificial leather can absorb sound, especially the whole vehicle floor glue, the effect is better.

In general, the car paving glue is more harmful than good, can not be installed or not installed. The general material of the rubber is artificial leather, more soft plastic, the smell of the rubber is not a big problem, the taste can be improved or tolerated, but it contains a large amount of formaldehyde, benzene and other harmful substances can not be easily removed, if there are children at home, it is best not to shop.

How to disassemble car floor glue? First of all, remove the car seat, then remove the bead, and finally remove the floor glue.

1. Install floor glue.

All the seats in the car must be removed, and the floor glue must also be removed from the seats. 2. If the floor glue is no longer needed, you can use a tool to cut the floor glue into several small pieces, and then gently pull the floor glue off. 3. After the floor glue is completely removed, it is best to clean the carpet with a car vacuum cleaner.

Floor glue is a layer of carpet-like items laid under the seat of a car. After laying the floor glue, it is easy to clean the dirt in the car, and at the same time, it also reduces the dead angle of the vehicle to hide dirt and dirt.

Disadvantages of floor glue:

1. The quality of the rubber is uneven, if the inferior rubber products are laid, harmful gases will be released during use, which will directly affect the health of the occupants in the car.

2. The floor glue will hinder the moisture volatilization of the carpet, when the humid air in summer or the rainwater in rainy days is brought into the car and infiltrates under the floor glue, it is very easy to create mold and odor of the carpet under the floor glue, and even corrode the chassis of the body.

3. Floor glue needs to remove all the seats in the car, which is a huge amount of work and difficult to remove once it is paved.

1. Clean the car to ensure that there is no debris within the working range;

2. Disassemble the car seat;

3. Clean the car thoroughly to ensure that the ground is clean and dust-free;

4. Place the paved floor, pay attention to each part, which can be improved;

5, mounted on the original car seat;

6. The goods belong to the owner;

7. Clean the body and interior of the car.

The floor glue is bifurcated in the front, and the conjoined body is in the back, and the position is roughly placed. Remember the screw holes, air conditioning outlets, and other wiring ports on the floor before covering the floor. For the next step of the floor glue opening.

1. Clean the car to ensure that there is no debris within the working range; 2. Disassemble the car seat; 3. Clean the car thoroughly to ensure that the ground is clean and dust-free; 4. Place the paved floor, pay attention to each part, which can be improved; 5, mounted on the original car seat; 6. The goods belong to the owner; 7. Clean the body and interior of the car.

Disassemble the seat: Use the Cruze special inner six plum wrench to disassemble the front two and rear seats, note that there is a wire under the main driver's seat, you need to unplug it, and then take off the seat. The rear seats can be removed without a wrench, and the rear seats can be pushed back and forth vigorously;

Automobile floor adhesive removal method, first remove the seat, and then dismantle the floor glue, if you don't want the floor glue to pull away directly, cut from the seat place: 1, the car floor glue is a device to protect the car, plays a pivotal role, can effectively sound insulation, dustproof, moisture-proof, prevent wear and tear and other characteristics, after the development of recent years, the automotive floor glue sales bureau has overcome the previous PVC material floor glue is not wear-resistant shortcomings, has become a new fashion floor glue products;

2. In terms of the selection of automotive floor adhesive, it is nothing more than choosing from the aspects of color, thickness, and material. First of all, the color of the car floor adhesive, the most important is gray, black, blue and other third color series of floor glue, from the thickness of the car floor glue to choose, it is best to choose the thickened car floor glue, so that the laying effect will be better;

3. The third is the choice of material, generally there is thickened rayon, and there is a thickened artificial leather material, both of which are only used in a variety of different vehicles, and it is also easy to clean and clean.

Millions of car purchase subsidies.