Some problems with Gundam spraying, what is the role of GUNPLA spraying matte paint?

First, it is strongly recommended not to spray paint in rainy days If you must spray in a humid environment, it is recommended that you use more than 3 water grids Your big water is not water, and the small water is full It means that the big one has failed or leaked air The result of your similar spit is the result of incomplete water filtration There must be unscrupulous profiteers mixing water in the solvent Or the spraying environment is too humid Water replenishment can play the function of unifying the background color, since it is sprayed, it is recommended to spray all evenly Otherwise, the light-colored surface paint will have a slight color difference There is no transparent water supplement If you spray the main color, if you do the highlight effect, it is recommended to use No. 2000 to light once after water replenishment, and then use bright yellow as the base, the color will be brighter, if you spray metallic color, the background color should be bright black, the darker the primer, the more the amount of metallic texture, the stronger the matting, the varnish only has an ordinary anti-oxidation effect, there is no particularly good protective effect on friction, and it is recommended to use mirror cold baking paint if you must wear friction protective paint, the strength is relatively high, and it is scratch resistant.

Guangzhou has been raining heavily in the past few days, the air humidity is too much, bursting out of the coarse point and a large piece of pigment, not necessarily a pen, there is a problem with the air pump, it may also be a humidity problem, the uneven color of the soil is not even for the later spraying has little impact, but repeated coverage causes the paint film to be too thick, it seems that the transparent soil is not visible, and the general water is good to make a primer, and the transparent is not interesting Now the humidity is too much, and the metallic color is not good, especially silver, which is easy to lack luster, Turning to a silver-gray color prevents friction and can touch another layer of matting, which increases the realism of the model and also prevents friction from peeling off the paint.

It should be the weather, spray out a piece by piece, you see if the airbrush pen has accumulated paint, if there is, wipe it clean, or change the crown pen to the easy accumulation. If it's not usually a problem with the pen, or the paint is not adjusted properly. The uneven filling of the soil has little effect, and the anti-peel paint can be sprayed with protective paint, such as matting, gloss or semi-gloss, and different protective paints can be sprayed according to different models.

1. Matting refers to spraying a layer of matting paint on the surface of the model to reduce the gloss of the plastic to increase the texture, and also protect the paint surface from being damaged.

2. Gundam is basically sprayed and matted if the prime group is sprayed, because spraying matte can reduce the texture of plastic.

3. The principle of extinction is: from specular reflection to diffuse reflection.

4. The consequences of matting: reduce the gloss of plastic to increase the texture, but also protect the paint surface from being damaged, reduce the refractive index of the surface, and do not see the feeling of reflection.

GUNPLA matte paint is used to get rid of the cheap plastic feel of the model, and it also acts as a layer of protection.

Matting paint is a type of protective paint.

er。。Matting is important.

The model soul said a sentence, no extinction, no model.

Hehe, if you finish assembling a body like Zagu.

Does LZ feel a lot like plastic, or rather, just a toy...

Then we need the help of extinction, the principle of extinction is to change from specular reflection to diffuse reflection.

Therefore, after spraying a layer of matting, you will find that there is a frosted feeling on the surface, which is normal, I will now answer the first question of lz, and the most important question, how to spray matting is very particular.

If it's a blind spray to the death of Gundam.。。 It's not just wasteful. And the effect is really disgusting, there will be a lot of white dots on the surface.

Therefore, it is common to spread the limbs apart and spray them separately. Sweep two to three times. Most places should have a matting effect.

Then after 10 minutes, under the lamp, see if there is reflection in those places.

Spray it on that place again.

Generally, 2 to 4 times, you can do all the matting, remember to be impatient, be sure to take your time.

The second function of matting paint is protective paint.

So, of course, spray after coloring.

It also prevents the destruction of watermarks or transfer stickers.

The third problem,After spraying,The effect will generally be darker.。。

It doesn't have the luster of plastic, but it's more textured...

Note that there are two types of matting: matting additives and matting paints.

If it is a spray can, there is only matte paint.

Matting additives are mixed with 10 to 20% additives in gloss paint, because if you spray matting directly, it may whiten.

So mixing additives directly can have a good effect...

Also, such as Kabini, Sin'anju, it is recommended to use varnish instead of matting to wish the LZ model a happy ...

The principle of extinction is to change from specular reflection to diffuse reflection.

The role of matting paint is to protect the paint.

So, of course, spray after coloring.

It also prevents the destruction of watermarks or transfer stickers.

The main thing is the role of decoration, so that the Gundam has a three-dimensional, realistic feeling, like in the anime, there will not be too much luster.

I've bought 10 hg's, it's fun, have fun, have fun.

+ Texture, the color fades a little, you can dilute the nozzle and not yellow, and if you spray it in a humid situation, it will be whitened, but the success is very good.

Prevent oxidation, remove light, protect!

First of all, you have to understand that matte, semi-glossy, and glossy three kinds of transparent paint, in fact, the nature is the same, generally as the last layer of paint (protective layer), the reason why there are three is according to their different needs, like the Gundam model is matting in most cases, this is more textured, in fact, it depends on personal preference, such as Sazabi and Xin'anzhou Most of the bodies are glossy.

What I want to say here is that if the color is good, it is recommended to paste the water paste or seepage line, it is recommended to shine first, and then finish the matting according to the need, because the surface particles of the matting paint are coarse, the water paste is not easy to stick, and it is difficult to wipe the seepage line, and the seepage paint will penetrate into the particle gaps of the matting paint, and the gloss (usually called varnish) surface is very smooth.

Basically, no one will dull the metallic color, so the metallic effect is instantly gone.

In addition, it is not very appropriate for you to say that the soil is replenished, it should be water to replenish the soil, because there are also ab soil supplementation, toothpaste supplementation, Poly supplementation, etc., collectively referred to as supplementation, but the role is completely different, generally water supplementation soil is used for primer (up to 1000 is generally 1000, with 1200, 1500 does not matter, 1000 is not recommended), AB, toothpaste, Poly, etc. are generally used to fill gaps, pits, or shaping, instead of some small parts.

I have used both kinds, matte white is TS-27, the white paint is mixed with matting agent, and it is a white matte paint surface when sprayed out. Matting paint is a clear matte paint. Both methods aim to spray a white matte surface, but the effect is slightly different.

As far as personal feelings are concerned, the effect of matting white is better, because the ratio of primer and matte has been adjusted, the white is sprayed, and the matte effect is good.

If you spray ordinary white first and then spray matting, I feel that the granularity of the matte paint is slightly larger than that of matte white, and the matte paint surface is added later, so it is not easy to spray as evenly as matte white, and the matte feeling is not so delicate.

The white part sprayed with matting white does not need to be covered with a layer of matting paint, otherwise the effect will be covered, and the effect will be the same as that of ordinary white paint.

Upstairs mentioned the problem of seepage, this is really to pay attention to. It is not possible to seep on the matting surface, otherwise the pigment will not be wiped clean, and the model will be very dirty. If LZ wants to bleed the line, then you can only choose to spray ordinary white.

I haven't tried the color gap, and there will be problems with the bleeding line after the matting paint is sprayed, so it is generally sprayed with ordinary white, then bleeding, and finally sprayed with matting.

Matte paint is a kind of transparent paint, and the paint surface sprayed is a matte surface, mostly used for figures, up to not a special part is not recommended to use, and the color of the model itself is not as good as after spraying paint.

I haven't seen anyone spray matting white, it is estimated that there should be a gap in the effect, the general matting paint is a transparent paint, and the matting white is estimated to be the white paint with matting paint.