How should the washing machine be cleaned? How should the washing machine be cleaned?

How to wash the washing machine

1. Dismantling and cleaning method of drum washing machine.

1) First of all, remove the door of the drum washing machine, generally there will be screws in the position of the door of the washing machine, after removing all the screws, you can remove the door of the drum.

2) After removing the door of the washing machine, remove the upper cover of the washing machine.

3) After removing the upper cover of the washing machine, remove the control panel. It should be noted that there are wiring on the control board, and it is best to take a photo of the wiring position and save it. Easy to install after cleaning.

4) After the control panel is disassembled, the panel is disassembled.

5) After disassembling the front upper panel, remove the cement blocks with the upper and lower counterweights, and then the upper and lower baffles, as well as the baffles in front.

6) The outer barrel is divided into two parts, the upper and lower red circles are the screws that have removed the cement counterweight part and then removed the arrow.

7) Then after removing the front half of the outer barrel, the inner barrel is exposed.

8) Then turn on the back panel of the washing machine.

9) Remove the belt first, then disassemble the center fixing screw, and gently tap it with a rubber hammer, so that the inner barrel can be taken out.

10) After the inner cylinder is disassembled, you can start cleaning, and you can use hydrogen peroxide disinfectant or washing machine special cleaning agent or bleach to clean it, which has a good cleaning effect.

2. Dismantling and cleaning method of washing machine.

1) Check whether the screws on the inner cylinder of the washing machine are clubs, slotted screws or Phillips screws. Select the appropriate screwdriver, remove the screw in the center of the wave wheel, and take out the wave wheel.

2) After taking out the wave wheel, use a screwdriver to remove the four screws around the washing machine workbench. Then bring the entire workbench up. There are generally four screws on top of the inner cylinder, and the screws of the contents are removed.

3) Use a wrench to unscrew the nut on the central shaft, and if you don't know what size screw it is, you can use a live wrench to unscrew the nut. You can take out the dehydration bucket.

4) Put the washing machine down, there is a protective ring at the place of the clutch, remove the sleeve and then unscrew the screws around the clutch. The washing machine was disassembled.

5) Clean the inner cylinder wall and clutch of the washing machine with cleaning agent, and then install it back as it is.

1 First, turn off the washing machine and find the lid in the bottom right corner that needs to be opened.

2 Then, using a gadget such as a key, you can pry the lid open.

3 Then, when you open it, you will see a small round lid. Open the small round lid counterclockwise and remove the lid directly.

4 Finally, the cover has been successfully removed and it is ready for cleaning.

Here's how to clean your washing machine:

1. White vinegar cleaning. White vinegar has become a very useful little helper at home, as if there is nothing it can't clean. When we use white vinegar to clean the washing machine, we need to use the action of a towel.

The first step is to wet the towel with white vinegar, and then throw the towel in it and turn on the spin drying mode of the washing machine, so that the white vinegar can evenly stain all parts of the inner cylinder of the washing machine, which is convenient for disinfection and sterilization.

2. Baking soda cleaning. The decontamination power of baking soda is well established, and the same applies to washing machines. We first need to mix baking soda with water to make a solution, and then pour it into the washing machine filled with water, so that after washing, we will find that a lot of dirt is discharged from the drain pipe of the washing machine.

3. Stupid bleach cleaning. What we have to do is to put the washing machine to the highest water level first, and then you can pour bleach solution into it, about 30 minutes or so, you will see that the originally clean water begins to slowly become turbid, this method can be cleaned to the outer wall of the inner drum of the celery washing machine. If you have friends who feel that the cleaning is not clean enough, then it is okay to do it again.

Precautions for daily use of the washing machine

1. When using the washing machine for the first time, check the washing machine manual, use it according to the operation, and pay attention to safety issues to avoid electric shock accidents.

2. When using the washing machine, be careful not to use it with other high-power electrical appliances, otherwise the same socket will have too much current, which may cause failure.

3. It is not easy to let corrosive substances be imitated next to the washing machine, and flammable materials cannot be placed, so the position should be appropriate, and it is best to ventilate and dry places.

4. If the washing machine is running with excessive noise, water leakage and electricity leakage, it should be stopped immediately, the cause should be found, and the fault should be eliminated before use.

The first step in cleaning the washing machine is to clean the filter. Step 2: Clean the walls of the barrel. Step 3: Clean the entire washing machine. Step 4: Clean the laundry box of the washing machine. The fifth step is to clean the rubber ring of the washing machine, and the sixth step is to clean the filter.

How to clean the washing machine——

1. First of all, a certain proportion of cleaning agent and disinfectant should be poured into the detergent of the washing machine. Then turn the washing machine on the wash mode. Wait for the water level to rise to a certain height, then press the stop button and wait for the detergent to soak in the washing machine for about half an hour.

2. Then start the washing mode and let the washing machine run for half an hour. When you start drain mode, the washing machine will drain dirt out of the drain pipe. The detergent and disinfectant can be re-washed in the detergent refill box.

Then the sewage in the washing machine is discharged through the pipes, and finally the inner wall of the washing machine is rinsed with clean water until it dries naturally.

3. There will be two filters on the inner wall of the washing machine. These two filters can be cut off and the dust on them can be wiped off with a fine soft brush. There will also be a lot of dirt inside the filter, so use a wet towel to wipe off the dirt on it.

The washing machine should be cleaned before each run.

4. When turning on the washing machine, try not to press the switch on the washing machine and turn on the washing machine directly. This can cause the washing machine system to malfunction and also cause the washing machine to stop running.

Tool Material: Take Haier Casarte XQGH80-HBF1406A washing machine and laundry detergent as an example.

1. First of all, connect the socket of the Hale Casarte XQGH80-HBF1406A washing machine.

2. Then open the laundry detergent box of Haier Casarte XQGH80-HBF1406A washing machine.

3. After that, add the laundry detergent to the box and introduce the laundry detergent.

4. Then close the crack seepage laundry detergent box of the Hale Casarte XQGH80-HBF1406A washing machine.

5. Secondly, rotate the "open" knob of Haier Casarte XQGH80-HBF1406A washing machine.

6. Furthermore, on the operation panel of the Haier Casarte XQGH80-HBF1406A washing machine, click the "Start Adding Clothes and Trembling" button.

7. Finally, Haier Casarte XQGH80-HBF1406A washing machine began to be cleaned.

Depending on the type of washing machine and the degree of dirt, there are several cleaning methods you can choose from:

Use bleach: This is an easy and quick way to effectively remove color, odor, and bacteria from the inside of your washing machine. All you need to do is fill the washing machine with hot water, add a spoonful of bleach, activate the wash mode or soak for about an hour, and drain the water.

You'll also need to wipe down the rubber seals and panels on the washing machine door with bleach to prevent mold growth.

Use edible soda powder: This is a natural cleaning substance that removes grease, stains, and odors. All you need to do is fill the washing machine with hot water, add 100 to 120 grams of baking powder, start the wash mode or soak for half an hour to an hour, and drain the water.

You can also wipe down the laundry detergent sink and panel with soda powder to remove dust and debris.

Use white vinegar: This is a natural acidic substance that kills and descales. All you need to do is fill the washing machine with hot water, add 300 to 400 ml of white vinegar, start the washing mode or soak for half an hour to an hour, and drain the water.

You can also wipe down the rubber seals and panels on the washing machine door with white vinegar to remove odors.

Use a washing machine cleaner or powder: This is a product specifically designed to clean a washing machine and remove dirt and mold from a deep level. All you need to do is pour the detergent or powder into the washing machine as instructed in the product leaflet, start the washing mode or soak for a certain period of time, and then drain the water.

You'll also need to wipe down the laundry detergent sink and panel with detergent or powder to keep it clean.

The above are four common ways to clean your washing machine, and you can choose the one that suits you according to your situation. It is recommended that you clean the washing machine once a month, remove wet clothes after each use, and keep the inside of the washing machine dry. This extends the life of the washing machine and guarantees the cleanliness of the laundry.

1. Fill the laundry sink with water to the highest water level. (The drum washing machine chooses the 40 degree heating function, and the drum washing machine can pour hot water, and the dissolving effect will be better).

2. Pour a whole package of washing machine inner cylinder cleaning agent into the "detergent addition box".

3. Close the drain pipe to avoid overflow.

4. According to the washing program for 3 5 minutes, fully dissolve the inner drum cleaning agent.

5. Turn off the power and soak the water in the tank for 2 to 3 hours to fully decompose the dirt and kill bacteria.

6. Let the washing machine run again according to the main washing mode of the washing machine, and clean the filter again. At this point, the descaling and cleaning are complete.

7. If the amount of dirt discharged is too much, place an idle towel and run it again according to the main washing mode of the washing machine.

Tip 1: Clean with a detergent. Add clean water to a high water level first, the machine runs for 5 minutes to fully dissolve the detergent, the drum washing machine that can be heated can be heated to 40, turn off the power of the washing machine and soak for at least 1 hour, and then wash the machine according to the daily washing mode, after stopping, you will see a large number of dirt fragments floating on the water.

In this way, it is difficult to accumulate dirt in the machine after cleaning it every other month. In addition, usually after each laundry, do not rush to close the washing machine door, let the machine ventilate to keep dry, can prevent scale and mildew, tip 2: wash with bleach.

Add an appropriate amount of bleach, be sure to choose chlorine-containing bleach. In 40 liters of water, add 300 ml of bleach. Adjust to a high water level, wait for the water to fill up, add bleach and stir well.

The foam that starts slowly is caused by the dissolution of the detergent remaining in the inner bucket. After about twenty minutes, the bleach will completely wash the dirt off the back of the inner barrel. When the water is dehydrated after stirring, dirt will remain at the bottom of the inner barrel of the washing machine, and water must be put in again to completely drain the dirt.

Tip 4: Wash with white vinegar. Add clean water, the water is not more than half of the washing machine and the laundry bucket, do not put any washing items, soak for 3 hours, then start the washing switch, rinse several times, then pour off half of the water, add white vinegar (as much as possible), leave it overnight, release the washing water, wash it with water again, open the lid and let it dry.

Hello, thank you for asking the company.

Dear, you can buy a bucket detergent to clean it by yourself, here's how:

Operate according to the requirements of the washing instructions of the beam tease barrel. Bring water to high water level, run for 1 minute, turn off the power to soak the oak is sold. Need to soak for 2-6 hours before you choose to run the regular washing program.

After a long period of use, the washing machine will develop mold, and it is recommended to wash it every three months.

If you want to clean the wire chip filter or distributor box, please follow the instructions in the figure below

You are welcome to ask the company questions again.

We wish you a happy work life