What is the cause of water dispenser leakage? What causes a water dispenser to leak?

Water dispensers sometimes leak in use, and the reasons for water dispenser leakage can be roughly divided into two points:

1. Leakage of water buckets: water dispenser leakage caused by small cracks, small trachoma, etc.

2. The water pipe of the water dispenser itself is broken, the water storage tank is perforated, the water pipe connection is detached, and the bucket cover, smart cover and smart seat have quality problems or poor coordination, etc., which will cause the water leakage of the water dispenser itself. Next, let's analyze what measures should be taken when we encounter water dispenser leakage.

Solution: If the faucet is leaking, you can tighten the loose cover, disassemble and clean the impurities, and replace the faucet if necessary to solve the problem.

For the leakage of the smart seat, if it is the overflow caused by the rupture of the water bottle, the intact water bottle can be replaced, and if the float fails when using the clean water bucket and cannot be effectively sealed, the float needs to be replaced.

Water leakage of internal components of the body, such as silicone pipe rupture hot tank, cold tank weld leakage, electronic ice tank leakage, solenoid valve leakage (pipeline machine), internal overflow caused by water bottle rupture and so on, can be replaced by replacing damaged parts; Use a good and qualified water bottle to solve the problem.

1. It's because if it's a water dispenser, the water-saving faucet is broken.

The solution is: tighten the loose cover, disassemble and clean the impurities, if this still can't prevent the water dispenser from leaking, then the only way to replace the faucet is to replace it with a new one.

2. Water leakage of internal components of the body, such as silicone pipe rupture hot tank, cold tank weld leakage, electronic ice tank leakage, solenoid valve leakage (pipeline machine), internal overflow caused by water bottle rupture.

The solution is: by replacing the broken parts; Use a good and qualified water bottle to solve the problem.

3. It is for the leakage of the smart seat, if it is the overflow caused by the rupture of the water bottle.

The workaround is; Replace the water bottle in good condition, if the float fails when using the water bucket and cannot be effectively sealed, the float needs to be replaced.

Causes: The faucet is leaking, there is air in the bucket, and the inner tank of the water dispenser is damaged.

Solution: If you find a water leak, you should first look at whether the faucet is leaking, if so, you need to check whether it is a long time to use hot water to burn the junction, etc., if not, then replace it with a new faucet.

If you find that there is no leakage, but the water in the bucket is completely gone, in this case, there is air in the bucket. You need to check it, you need to see if there is air in the bucket, and then according to the pressure of the air of course the water will leak out.

Use and maintenance:

When moving the water dispenser refrigerated by the compressor, it should be kept upright as much as possible, and when it is to be tilted, its inclination shall not be greater than 45 degrees, and it should be stationary for a period of time after handling before it can work.

When using the water dispenser for the first time, clean the containers and pipelines of the water dispenser with clean water, then unscrew the drain valve, and tighten the drain valve after draining the remaining water in the machine. After adding a large bottle of water, turn on the hot water faucet, and then plug in the power supply and turn on the heating switch after the water flows out, so as to avoid dry boiling and prolong the life of the machine.

If the water dispenser is out of use for a long time, please turn off the switch of the machine and unplug the power plug, then unscrew the drain valve, drain the remaining water in the machine, and then tighten the drain valve (please pay attention to hot water scalding during drainage).

Friends, water dispensers generally use float gate valves to slowly flow the water in the bucket into the heating bucket below, take the bucket away again, and then remove some water before putting it into the bucket.

1. The leakage of the cold fill weld and the leakage of the electronic ice tank are caused by the damage of the internal components of the water dispenser: check the internal components to see which component is damaged, and then replace them again, which can solve the problem of water leakage.

2. If the bucket of the water dispenser is broken or there is a gap, the water will overflow, and it will also affect the smart seat, which is also one of the reasons for the leakage of the water dispenser: first wrap the bucket with a towel, if the towel is wet, it indicates that the bucket is leaking, at this time, replace the bucket with a new one, if the towel is not wet, the reason for the leakage of the water dispenser may be the failure of other components.

3. When using the repentant car, if the faucet is not closed properly, a large amount of water enters the water dispenser, which may also cause the water dispenser to leak: re-screw the faucet to ensure that the water dispenser does not leak again and returns to normal.

4. The water dispenser leaks due to the aging of the check valve of the water dispenser, or is caused by the falling off of the hose at both ends: use a nylon tie to tie the check valve tightly to solve the problem of water leakage of the water dispenser. If the check valve is broken, it is best to replace it again.

Hope the above is helpful to you!

1. The leakage on the top of the water dispenser is generally caused by the rupture of the parts of the water purification bucket. The other is that there is a problem with the float of the water purification bucket, such as it cannot be sealed, but this situation generally does not happen. There is also a possibility that the water purification bucket is not properly placed and has air pressure, resulting in water leakage.

Maintenance method: Check whether the bucket is broken, if it is not broken, take it off and put it again or try to change the bucket of water.

2. There are two main reasons for the leakage of the smart seat of the water dispenser, one is that there are cracks at the bottom of the smart seat, and the other reason may be that the bucket is leaking, and there are cracks on the bucket that cannot be seen by the naked eye. Maintenance method: Replace the smart seat or bucket of the water dispenser 3, the water dispenser faucet leaks The main reason for the leakage of the water dispenser faucet is the loose cover at the end of the water dispenser, the rupture of the silicone sleeve inside, or the impurities and scaling inside.

Maintenance method: tighten the head cover, clean the impurities, if the problem cannot be solved, you can only replace the faucet. 4. Water dispenser internal components leakage, silicone pipe rupture, hot tank, cold tank weld leakage, electronic ice tank leakage, solenoid valve leakage and other maintenance methods

Replace the common faults and troubleshooting methods of the water dispenser 1, the common fault of the water dispenser leakage or water dispenser is water leakage or no water, and the water leakage elimination is relatively simple. If the water machine does not produce water, then the first thing to find out which level of filter element is blocked, the way to find is to disassemble the water inlet of each level of filter element one by one, you can find out which level of filter element is blocked, find the blocked filter element can unscrew the joint, shake it or directly connect the tap water backwash, see if there is a foreign object blockage at the joint, if it is not reinstalled, if it can not be solved, replace the filter element.

The common reason is that the water dispenser is not flattened, resulting in leakage from the side after the bucket seat is down, and another reason is the internal drinking pipe, or the aging of plastic parts causes leakage.

There are many reasons for this, it can be due to damage to the internal components, or the bucket is cracked or there is a gap, the faucet is not closed properly, and the check valve is aging can cause the water dispenser to leak.

Water dispenser leakage cause one.

Water leakage from cold fill welds and leakage of electronic ice galleries are all caused by damage to the internal components of the water dispenser.

Solution: Check the internal components to see which component is damaged, and then replace it again, which can solve the problem of water leakage in Huisui.

Water dispenser leakage cause two.

If the water dispenser bucket is broken or there is a gap, the water will overflow, and it will also affect the smart seat, which is also one of the reasons why the water dispenser leaks.

Solution: First wrap the bucket with a towel, if the towel is thorough, indicating that the bucket is leaking, at this time, replace the bucket with a new one, if the towel is not wet, the reason for the leakage of the water dispenser may be the failure of other components.

Water dispenser leakage causes three.

When in use, if the faucet is not turned off properly, a large amount of water will enter the water dispenser, which may also lead to the leakage of the water dispenser.

Solution: Re-screw the faucet to ensure that the water dispenser does not leak again and returns to normal.

Water dispenser leakage cause four.

The water dispenser leaks due to the aging of the one-way valve of the water dispenser, or it is caused by the hose at both ends falling off.

Grinding method: Use a nylon tie to tighten the check valve to solve the problem of water dispenser leakage. If the check valve is broken, it is best to replace it again.

Reason 1:

The reason for the leakage of Angel's water dispenser may be that the drinking bottle is leaking.

Workaround:

First of all, wrap the water bottle with a towel, if there is a leak in the level, the towel will be wet, then we can prove that the reason for the water dispenser leakage appears on the drinking bottle, or replace it with a new drinking bottle, observe that the water dispenser does not leak again, and the water dispenser will no longer leak after replacing the drinking bottle, which can also indicate that the reason for the water dispenser leakage is that the drinking bottle is broken. This is where the drinking bottle should be replaced.

Reason 2:

Sometimes we don't turn off the faucet properly after connecting the water, which can also cause Angel's water dispenser to leak.

Workaround:

Re-screw the water dispenser faucet to ensure that the faucet no longer leaks.

Reason three:

The one-way valve of the water dispenser will also cause the Angel water dispenser to leak due to aging or the hoses at both ends falling off.

Workaround:

Use a nylon tie to tighten the check valve or replace it with a new one'Check valve to solve the problem of water dispenser leakage.

Reason 4:

The smart seat of the water dispenser is leaking because the water bottle is ruptured and the water is overflowing.

Workaround:

Replace the water bottle with a new one, and replace it with a new one if the float in the bucket fails and cannot be sealed.

Reason 5:

When the water dispenser leaks, it is because of the leakage of the internal components of the water dispenser, such as the leakage of the weld of the cold tank, the leakage of the electronic ice gall, the rupture of the water bottle, etc., which will lead to the leakage of the water dispenser.

Workaround:

Check the internal components of the water dispenser, see which part of the water is leaking, and solve the problem of water leakage by replacing the corresponding parts.