Install natural gas first or decorate first, and whether natural gas is installed before or after re

Of course, the natural gas is installed first, these facilities are installed first, and then you decorate nothing will affect anything, if you are all renovated and then install natural gas, then you put things or other cabinets in the original position, which will be affected, so you should install these facilities first.

Decorate first to avoid danger. After loading natural gas, the damage to the wall is very small, at most two expansion screws are stuck in the pipe, almost invisible.

Of course, it is to decorate first and then install natural gas, first of all, the decoration of the kitchen, so that the natural gas is installed, then the natural gas stove can be installed.

Lay out the kitchen before renovating, then install natural gas first, and then decorate, if it is first decorated and then installed with natural gas, then you may have to go to the open pipe of natural gas.

Install natural gas first, and then decorate, so that some pipelines will be packaged and beautified in the post-decoration, and the effect is particularly good.

I think we should install natural gas first and then decorate the house, so that you can wrap the pipes and natural gas meters in a cabinet, so that it is beautiful and not messy.

If conditions permit, natural gas can be installed at the same time during the decoration process, and the effect is good for synchronization.

If you can get through, you can ventilate first!! If you make an open kitchen, wait until you finish the renovation and want to ventilate the gas company will not give it through! Don't do an open kitchen when I didn't say!

It is best to install all the natural gas first, and then decorate it with a measuring tape.

<> after renovating a new house, regarding the order of gas equipment and natural gas, the general practice is to open the natural gas first**, and then install the gas water heater and gas stove. Self-service ordering.

Here are the general steps and considerations:

Turn on natural gas**: Once your new home is renovated, you will need to contact your local natural gas company or service provider to turn on natural gas**. They will send technicians to connect the gas lines and install the gas meters.

You won't be able to use your gas appliances until late natural gas** is turned on.

Install gas water heaters and gas stoves: Once natural gas** is turned on, you can contact a relevant professional, such as a gas installation engineer, to install gas water heaters and gas stoves. He called out that the gas water heater and gas stove will be connected according to the gas pipe layout of the house, and ensure their correct operation and safe use.

Before proceeding with the installation of any gas appliances, it is important to follow local laws, regulations, and safety standards, and to communicate and coordinate with your local gas** company or service provider. They will be able to provide you with specific installation requirements and procedures.

It is important to note that this is only a general order of recommendations and may vary depending on region, business and individual needs. In practice, it is best to consult with professionals and relevant authorities to ensure that the installation and use of gas appliances is carried out correctly and safely.

It is recommended to follow the gas water heater and gas stove first, and then turn on the natural gas!

Precautions for the opening of the Tianpai Yuanranqi:

1. Before decoration, users need to go to the property to get the "Natural Gas User Decoration Notice" to see the content clearly, and plan the layout of the kitchen gas pipe in advance.

2. Before opening, the user needs to bring the ID card and real estate certificate of the head of the household to the business hall to sign the Xianghe account opening agreement.

3. Open two kinds of equipment (stove + water heater or stove + heating stove) at the same time, and meet the two conditions when the stove is in order.

4. The brand of gas appliances must be listed in the gas sales catalogue published by the relevant departments and the gas equipment must meet the safety specifications.

1. You must first open natural gas, or there is no way to try the gas stove.

2. Install the gas stove first, and then turn on the gas after the gas Songmoxiang water heater. The installation certificate is required to open the air.

3. Install the stove after the gas first, because there is no gas cooker, there is no way to detect the leakage, which is very critical, after the installation, the manufacturer's installer will also debug the stove file (air ratio), so it must be installed after the gas is passed.

4. The main use of natural gas is as fuel, which can make carbon black, chemicals and liquefied petroleum gas, and propane and butane produced by natural gas are important raw materials for modern industrial wildfighting. Natural gas is mainly composed of gaseous low-molecular-weight hydrocarbons and non-hydrocarbon gases.

After the renovation of the new house, if you want to use a gas water heater and gas stove, it is generally recommended to open the natural gas pipeline first. Because the installation of a gas water heater and gas stove needs to be connected to the indoor gas pipeline, these devices cannot be used if the gas pipeline is not opened.

To open a natural gas pipeline, you need to apply for the relevant procedures of the Liang Bank, and pass the acceptance of the natural gas company, and install the gas meter and other equipment before it can be used. After the opening of the natural gas pipeline is completed, facilities such as gas heating water appliances and gas stoves can be installed according to the specific situation.

In addition, in the process of purchasing and installing gas facilities, attention should also be paid to the selection of regular manufacturers and installation service providers to ensure the quality and safety of gas facilities.

We only experienced the two things of splitting the mountain some time ago, renovation and ventilation.

It is not excluded that one place and one policy will be in the stool.

But we made it clear that when we were doing gas ignition ventilation, we had to install a gas cooker before we could contact the gas company for ventilation.

Hello dear! Glad to answer your questions! After inquiry, the installation of natural gas pipelines must be arranged before the cabinets and tiles, so that the pipelines can be reasonably buried and installed.

If you wait until the tiles are applied before changing the gas pipes, once you encounter an unreasonable place, you need to pry the paved tiles open, which will not only troublesome the skin cavity, but also destroy the decoration of the kitchen.

Summary. Hello, under normal circumstances, it is necessary to decorate first and then install natural gas, but the gas pipeline must be arranged before the cabinet and tiling, so that it can be reasonably installed in the pipeline. If you wait until the tiles are applied to change the gas pipes, once you encounter an unreasonable place, you need to pry the paved tiles open, which is not only troublesome, but also destroys the decoration of the kitchen.

Hello, under normal circumstances, it is necessary to decorate first and then install natural gas, but the gas pipeline must be arranged before the cabinet and tiling, so that it can be reasonably installed in the pipeline. If you wait until the tiles are applied to change the gas pipes, once you encounter an unreasonable place, you need to pry the paved tiles open, which is not only troublesome, but also destroys the decoration of the kitchen.

When there is a home decoration, we should pay attention to the order, such as installing natural gas pipes first, and then pasting wall tiles, otherwise the order will be reversed and the early decoration will be destroyed.

Enter the area and get the decoration for free**].

Nowadays, most communities have begun to use natural gas, which is an environmentally friendly gas, and the charges are also very affordable, which can effectively save family expenses. Therefore, it is loved by the public. So, do you install natural gas or decorate first?

What do I need to pay attention to when installing natural gas? Let's take you to find out. Install natural gas first or decorate firstUnder normal circumstances, natural gas is installed first, but the gas pipeline must be arranged before the cabinet and tiling, so that its pipeline can be installed reasonably.

If you wait until the tiles are pasted and then come to rekindle the trachea, once you encounter an unreasonable place, you need to pry the tiles open, which is not only troublesome, but also destroys the decoration of the kitchen. Precautions for natural gas installation and combustion 1. When installing natural gas, it is necessary to pay attention to the surrounding environment, and its location must be selected in an area with good ventilation and lighting. For the kitchen in the bedroom suite, a partition is required to make it safer to use.

2. When installing natural gas, it also needs to be carried out according to the type of kitchen. If it is a dark kitchen, because there is no direct window and door to the outside, the natural gas stove used must be equipped with automatic flame-out protection function, and at the same time, it is necessary to follow the detection alarm to ensure your personal safety. 3. When installing the natural watch, it is necessary to pay attention to the regional environment, and there can be no power supply and switch around it, and it cannot be installed in humid areas.

If it is to be installed in a hidden location, such as in a cabinet, it must be easy to maintain, and at the same time, the diameter of the reserved ventilation holes cannot resist it, so that it can be ventilated. 4. Since the gas meter does not have waterproof function, it must not be washed by hand during use, and it is also necessary to pay attention to waterproof measures. Article Summary:

The above is all about whether to install natural gas first or decorate first and what to pay attention to when installing natural gas, I hope it will be helpful to you. If you want to know more about it, please stay tuned to Qeeka Home.

Do the math how much it will cost you to renovate your home

Generally, the gas pipeline is laid first, and then the gas is declared to be turned on at home, and then the gas water heater and gas stove are installed.

In addition to the basic facilities, there are also water, electricity, gas, etc., which are also necessary for life, so when decorating, when to turn on the gas is also a question that makes everyone hesitate, and the following will introduce it to you. The gas in the community generally has to wait until the decoration of most of the residents is completed and the acceptance of the property company is carried out, and the gas company has to check whether the gas installation has been changed from house to house, and the gas company will conduct an ignition test after all the acceptance. One thing to note is that canned and piped gas stoves are not the same, can not be universal, when buying a stove must declare that you use it on canned gas, wait until the gas ignition and then take it to modify.

Therefore, it is necessary to wait for the decoration of the Obino house, the fan gas stove, and the water heater are installed, and then turn on the gas, so as to measure whether there is a problem with the installation of your master.

It is advisable to turn on the natural gas first, and then install the gas water heater and gas stove. Because if the gas equipment is installed first, it is necessary to wait for the opening of the natural gas pipeline before it can be used, and the opening of natural gas requires a certain amount of time and procedures. In addition, after the natural gas is opened, you can also choose to rent other types of water heaters and stoves, which is more flexible and convenient.

Summary. Hello, I have seen your question and am sorting out the answer, please wait for a while Can a renovated house be filled with natural gas.

Hello, I have seen your question, and I am sorting out the answer, please wait for a while Generally, it is better to install before the decoration, because the rough room is convenient for renovation and laying pipelines, and if the decoration is completed, the natural gas pipeline needs to be dismantled; In addition, the natural gas pipelines in some communities are all laid, and the owner only needs to connect the pipe to use it, so there is no need to consider whether it is before or after the decoration.

Yesterday, the natural gas company said that we are not standardized, but it has been installed, will it affect the appearance.

It won't affect the aesthetics, but it is recommended that you check for any security issues.

It is said that there is a safety problem, it needs to be transformed, it is not standardized, and the gas has stopped.

If there is a safety problem, it is necessary to stop the gas for rectification.

Will it be changed to the house is full of pipes.

No, the renovation is also professional and will not have much impact on the aesthetics, so you don't have to worry.

Okay thank you. You're welcome, I hope mine can help you, and I wish you a happy life!