Why does my computer keep crashing, the system has been reinstalled, and the memory module has been

Test whether the temperature of the CPU is high or not, mainly to test whether there is a problem with the hard disk!

Excluding the memory and hard drive, there is only the graphics card or the main version.

Generally, the probability of a graphics card is relatively high. It's all because the fan on the graphics card is broken and the heat dissipation doesn't dissipate, which causes the electric melt on the graphics card to burst.

The main version will crash when the temperature is high and the pulp will burst (of course, it is impossible for the main version to burst the pulp, such as the first-line brand ASUS.)

MSI Gigabyte) main version is the most likely to break the north-south bridge.

If the north-south bridge is broken, there will be any problems.

Then you check to see if there is anything wrong with your system. Generally, infection with viruses will also cause the computer to crash frequently.

1: Changing the motherboard can be relieved. Fewer episodes.

2: Strengthen the internal heat dissipation device. Adding a high-performance fan can alleviate this. Fewer episodes.

3: Change the motherboard + strengthen the internal cooling device. Install a high-performance fan ==> will not fail to turn on around the clock.

I love AMD's products. Cheap and big bowl! But my cooling fan is yes. How many cm is your computer's cooling fan?

AMD's hot crashes are commonplace. Manually strengthen and modify the heat dissipation device to solve the thermal crash event!

For heat dissipation problems, replace the fan with heat dissipation silicone.

It's very unpleasant when the computer is stuck, frozen, and slow, and I will also encounter it, so I have summarized some experience, and you can see if it will help you:

1. The CPU is overloaded, or it is not working properly. Check CPU and graphics card cooling, dust removal, oiling, or replace fans.

Second, the power supply voltage is unstable and the power supply is insufficient. Replace high-quality, high-power power supplies. ps：xian86913

1. In the "My Computer" window, right-click the drive letter you want to clean up - "Properties" - "Clean Disk" - check the files you want to delete - OK - Yes.

2. Clear the temporary file, start-run-enter "%temp%"-OK. ps：xian86913

3. Clean up the registry and junk files with Optimizer or Super Bunny. ps：xian86913

4. Close some startup programs, start-run-msconfig---start, in addition to anti-virus software, input methods can be turned off in general. ps：xian86913

5. Delete unused program software. ps：xian86913

6. Defragment Disk--Start--All Programs--Accessories--System Tools--Disk Defragmenter--Selected Disks--Analyze--Defragment. ps：xian86913

7. Reduce the burden of memory, do not open too many programs. If you have too many documents open or too many programs running at the same time, you will not have enough memory to run other programs, so you should close the programs and windows you don't use at any time. ps：xian86913

4. Upgrade the graphics card and network card driver, and change to a higher-grade graphics card. ps：xian86913

Fifth, increase the physical memory, now the memory is generally at least 2G. ps：xian86913

6. Set up virtual memory reasonably. ps：xian86913

1. To play games, the virtual memory can be set to be larger, and the maximum and minimum values are set to 2-3 times of the physical memory. ps：xian86913

2. The method of setting virtual memory is: right-click on my computer - Properties - Advanced - Performance Settings - Advanced - Virtual memory change - Select the partition where the virtual memory (page file) is stored in the drive list - Custom size - Set the value in the "Initial Size" and "Maximum", then click the "Settings" button, and finally click the "OK" button to exit.

3. The partition where the virtual memory (page file) is stored must have enough space, the hard disk resources are insufficient, resulting in insufficient virtual memory, in a computer, it is enough to set up virtual memory in a partition, and it is not necessary to set it in multiple partitions.

7. Optimize your computer with Optimizer, 360 or Super Bunny, etc. ps：xian86913

Big killer move: change the operating system, once and for all] ps: xian86913

If you can't replace the operating system, it is recommended that you send it for repair! so as not to cause unnecessary losses.

I hope my reply is helpful to you!

Use the tool to activate and you're good to go! (The relevant information has been typed into HI).

Nowadays, very few people use genuine copies, if there is a problem with pirated copies, you can try another one!

Hello: The appearance of smartphone malfunctions can be affected by many factors. For example, third-party software conflicts, viruses, excessive cache usage, hardware and other problems will cause crashes.

It is recommended that you:1If an external SD card is inserted into the body, take it out for testing. Eliminate frequent crashes caused by poor performance of SD card.

3.Back up your phone's data (book, SMS, multiple files, etc.) and restore factory settings.

1. There is a problem with the power supply, such as the problem with the high-voltage rectifier filter circuit of the power supply, that is, the large capacitor of the power supply is bulging and leaking, and it can be turned on when it is turned on.

2. Problems with memory and graphics cards, such as problems with the video memory and graphics card's integrated block video memory chip, resulting in a crash, The solution is to dial out the memory and video memory, Be sure to remember the direction, use the eraser to align the gold finger (that is, the part with the copper sheet) back and forth a few times, change a slot and insert it back, (don't change the graphics card) on it.

If there is still a crash, it can be solved by repairing the memory chip of the integrated block of memory and graphics card.

3. The CPU fan is stuck or the heat sink is loose, this is because the fan is stuck by dust or the fan is broken, the CPU can't cool down, and when the temperature reaches the temperature set by the motherboard, the motherboard will shut down when the motherboard starts protection, so it will crash after a period of time, and when the heat sink card is loose, it will be the same as the above reasons.

4. There are problems with the components of the motherboard, such as power supply IC, field effect tube, CPU power supply, I O is also soldered, etc., there will also be crashes, and it is also common for the motherboard to crash. You have to repair these electronic components of the motherboard.

5. There is a problem with the computer's operating system, such as poisoning, loss of files, etc., it is OK to reinstall the system.

6. There are too many bad sectors in the hard disk, and when the hard disk reads these places, it can't be read, which causes it to get stuck, and after a while, it crashes, and the solution is to use the HDD to check and repair the bad sectors or replace the hard disk.

Reasons for computer crash: 1 Memory problems, pull out the memory and plug it back in, if it doesn't work, you can repair the place where the computer is repaired, it should be a change of inner memory.

The main causes caused by hardware are: 1. Poor heat dissipation: the display, power supply and CPU will crash if the working time is too long, and the fan will be dusted and oiled. Check the CPU temperature (go to BIOS or use CPU-Z), it should work around 35 to 60 degrees.

2. Dust killer: too much dust in the machine will also cause crash failure. Clean the chassis regularly.

3. Memory module failure: mainly due to loose memory module, the quality of the memory chip itself, the memory module contact fault should be eliminated according to the specific situation, if there is a problem with the quality of the memory module, the memory needs to be replaced to solve the problem.

4. Hard disk failure: If the remaining space of the hard disk is too little and there are too many fragments, the machine is easy to crash when it is running. It is necessary to develop a good habit of regularly organizing your hard drive and removing junk files from your hard drive.

If the hard disk is aging or due to improper use of bad sectors and bad sectors, it is necessary to use the tool software to troubleshoot, and if the damage is serious, the hard disk can only be replaced. Other reasons 1, software and hardware incompatible: 3D software and some special software, may not be able to start or even install normally on some microcomputers, find and delete incompatible software and hardware.

2. Driver installation is incorrect: When some hardware, such as the driver of the graphics card, is installed incorrectly, it will suddenly crash with a blue screen or black screen when the system is booted into the desktop, check and delete the problematic driver. 3. Defects in application software:

If you run this kind of buggy software, the system may freeze or not boot properly, in this case, you should find the latest version of the software or simply uninstall it. 4. Virus infection: Viruses and Trojans can cause a sharp drop in computer work efficiency and cause frequent crashes.

At this time, we need to use anti-virus software such as KV3000, Kingsoft Antivirus, Rising and so on to conduct a comprehensive investigation and anti-virus. Before you check for viruses, make sure that your antivirus software has an up-to-date virus database. You can click on the "Upgrade" button to update it so that you can make sure that you can detect the latest viruses.

Dizzy. I had the same problem the day before yesterday. Sweep the dust inside the main unit with a soft brush.

Unplug the memory module. With an eraser. Vigorously wipe the copper plate connector on the memory module to clean the copper oxide on it.

It should be that the memory module is not plugged in tightly......

1. Reinstall the system 2. This problem can also occur if there is a problem with the hard disk.

stop:0x0000008e this error**Most of them are caused by hard disk failures, I have also encountered this phenomenon, the system reinstallation is useless, just change a hard disk, if you suspect that there is a problem with the hard disk, you can use HDTUNE software to detect it. Hope it helps.