-
Anonymous users2024-02-15How to Operate:1The vol+- on the earphone line control is to increase and decrease the volume, and the middle button is to turn on and hang up.
3.The control key of the Apple earphone**, when you want to call** to someone, you only need to press that key, and say to the headset to call** to so-and-so.
4.When the camera is turned on, simply press the + on the top of the headphones and the camera will automatically take pictures.
-
Anonymous users2024-02-14Apple wireless earphones are broken after listening to it for a few minutes, and the solution is as follows:
1. The problem that Apple airpods Bluetooth headphones always appear to be disconnected is a Bluetooth problem, or it may be a system problem, open the settings.
2. Enter the settings interface, click to enter the Bluetooth interface, turn it on and then turn it off for five seconds, and then turn it on to see if there is still a disconnection problem.
3. If there is still a problem with the disconnection and concealment, we will have the restoration option in general.
4. Then in the restore interface, select Reset Network Settings, delete all records, and then pair and connect with the Bluetooth headset again to solve the problem that the Apple Bluetooth headset is always frequently disconnected. Michi.
-
Anonymous users2024-02-13The principles and techniques are not complicated, and the brilliance is that it is convenient for users and improves the user experience.
The principle is relatively easy to understand. After the earphones detect that they are out of the ear, they will pass this signal to the mobile phone, and after the mobile phone receives the signal, the audio or ** program that is running will be paused.
It's not technically sophisticated. The headset uses Bluetooth to transmit and interact with the phone. The key point is how to identify if the headphones are inside the ear. At present, the application of in-ear detection technology is very common and mature.
This is a typical technical application scenario. Several common techniques, neither difficult nor profound. Someone with a heart combines them with wisdom to produce extraordinary magic.
In short, the development of science and technology has made our lives more exciting.
Automatic detection of human ear technology!
In-ear detection. ied: in ear detect 。In-ear detection technology.
Headphones with this feature have one thing in common: there is a black area on the surface where the earbuds come into contact with the inside of the ear, and there is a proximity sensor. A signal is generated when an object is approaching or moving away from the area.
You can do a test with your hands.
Just pinch the sensor with your hand, and it will ring even if you put it in your pocket. [tears run].
Huawei also has this feature.
-
Anonymous users2024-02-12Unlock the iPhone8 phone, and the upper right corner of the screen shows that it is currently [Headphone Mode]. 2.Touch the [Home button] on your iPhone 8 to return to the home screen page and open [Settings].
3.In the detailed list of options in Settings, find the Bluetooth setting. 4.
Go to the [Bluetooth] management settings page and display the Bluetooth headset device that is being connected. 5.Turn off the Bluetooth function under the [Bluetooth] management settings page and disconnect from the earphones.
How to disconnect wired headphones from an iPhone.
2.Touch the [Home button] on your iPhone 8 to return to the home screen page and open [Settings]. 3.
In the detailed list of options in Settings, find the Bluetooth setting. 4.Go to the [Bluetooth] management settings page and display the Bluetooth headset device that is being connected.
5.Turn off the Bluetooth function under the [Bluetooth] management settings page and disconnect from the earphones.
How to disconnect the Apple phone from the wired headphones.
I'm 6s1First open your phone's settings to enter Settings, tap Bluetooth then, 2 and then tap the exclamation mark on the right to enter 3Click on Ignore this device option above4Then click on the Ignore Device option below to disconnect the Bluetooth.
It's not Bluetooth but it's a wired normal headset.
Pro, 1, first turn on the iPhone iPhone6, click the "Settings" icon. 2. Then click on the "General" option. 3. Click on the "Accessibility" option again.
4. Then swipe down on the phone screen to find and tap the "Audio Call" option. 5. Then check the "Speaker" option. 6. Finally, turn off the phone and restart the phone.
Dear, this is the operation procedure of Apple 6S.
-
Anonymous users2024-02-11Hello dear! Apple earphones are connected to the automatic disconnection, how can the friends go, the Apple airpods Bluetooth headset always disconnects The problem may be a Bluetooth problem, or it may be a system problem, we open the settings. 2. Enter the settings interface, click to enter the Bluetooth interface, turn it on and then turn it off for five seconds, and then turn it on to see if there is still a disconnection problem.
3. If there is still a disconnection problem, we have the restore option in general. 4. Then in the reset interface, select Reset Network Settings, delete all the records, and then pair and connect with the Bluetooth Sensun earphones again to solve the problem that Apple's Bluetooth headphones are always frequently disconnected. I hope to help you who don't have Chunhuai!
-
Anonymous users2024-02-10Apple earphones to disconnect from other mobile phones by Bluetooth, follow the following method:
1. Put the AirPods Bluetooth headset into the headphone case. (as shown in the figure below) 2, Song Minrot is to enter the settings on the mobile phone, select Bluetooth and click on the wild drain to enter, find the Bluetooth pairing connection record in the list, delete or ignore the previous Bluetooth connection. (as shown in the image below).
In this way, it is possible to disconnect the AirPods from the previous phone.
Headset airpods are connected by someone else to find the method:
Your AirPods can be retrieved if others are connected, because AirPods do not support GPS positioning, and the other party needs to know that you want to reset the pairing when using headphones, click to open the "Find" on the desktop of the mobile phone to enter the Find function page. Click the "Device" option on the search function page to enter the device page. Once you're on the device page, tap the AirPods you want to find in the device list.
In the pop-up window, you can see the last position of the AirPods. <>
Yes, it can be used universally. Tools:Huawei Honor 8, the system version is Android. The steps of the method are as follows: >>>More
It can be detected when it is disassembled, but it is generally not taken apart for detection.
Apple's wireless Bluetooth headphones can't be found at homeApple's Bluetooth headset is gone, and you can assist in retrieving it through iPhone location, the specific method is as follows: >>>More
First of all, open the charging case of Apple mobile phone and airpods respectively, after they are opened, the system will have relevant prompts, according to the prompt, press and hold the button on the back of the charging case, when the phone appears airpods charging case power and earphone power, it means that the connection is successful. If you want to set up AirPods, you only need to turn on your phone, find the settings option from the desktop of your phone and open it, click Bluetooth after entering the settings page, and then tap AirPods, and then you can make relevant settings after opening. AirPods can also be connected to non-Apple devices, when connected, you only need to press and hold the switch behind the AirPods charging case, and then turn on the Bluetooth of the mobile phone to search for pairing, and it can be used normally after successful pairing, which is also more convenient. >>>More