Yingtai I945C M7B. E2160 。How to overclock? I m Xiaobai, thank you for being specific .

It is recommended that it is better not to overclock, and the overclocking operation is not very stable.

The upstairs is written in great detail.

200 is set to 333.

This cup is completely outdated, not super white and not super super.

At most, I burned it for a strong one.

Buy a new machine directly, what frequency is super, and leave it for your parents and friends.

It's super and can't improve much performance!!

Or don't overshoot.,It's no problem to play large games with this configuration.,It's dangerous to be over-exceeded.,The hardware is not enough to support it.,Of course, if you're strong.,You can try.。

My CPU is the same as yours, the motherboard is also Weconex 945's graphics card garbage point 7300, overclocking a few seconds before the graphics card burns, I only overclocked, the motherboard supports it, but unfortunately I spent another 300 yuan to get a GT210, hey!

Yes, it is not a problem to be super pressurized.

I'm over to the outer frequency is 416 . Let's go for it.

The air-cooled extreme physique of the ordinary M0E2160 is around. The silent electric constitution is in between.

The G0E2160 air cooling limit is around. The silent electric physique is in.

The average Kingston D2 800 constitution is around 900 1000. The good ones can go to 1066 or even higher.

Step 1: Enter the BIOS and directly pull the external frequency from 200 to 300Asynchronous memory to around 900. It should be able to light up normally, and after entering the system, run or to see the situation. After 10 minutes, it will reboot into the BIOS for the second step.

Step 2: Go to BIOSPull the external frequency from 300 to 350 directlyAsynchronous memory to around 900 1000. If it turns on, go into the system orIf it doesn't light up, empty the BIOS and try again.

Step 3: If 350 is not lit, reduce the external frequency to 320, and the memory asynchronous to about 900 1000. Re-entry system or

I've already told you about your physique, so you can compare your physique and slowly fine-tune it.

Overclocking is a slow job, don't rush, take your time.

If you want to overclock for regular use, it is recommended not to add memory and CPU voltage.

The default E2160 is the most perfect way to run: the CPU works in memory and works around 1000 or 960.

In addition, the temperature of the button meat E2160 is generally very low without voltage, and ordinary fans are sufficient.

Hello landlord.

In terms of performance alone, of course, the E5200 is good.

However, your motherboard uses a 945 chipset, and the 945 chipset does not support 45nm CPUs well (the E5200 is 45nm), while the E2220 is 65nm, so it is recommended that you use the E2220

The Besturn dual-core E5200 (box) is better, and the price ratio is also good, which is very suitable for your current configuration. The E5200 is a five-capacitor capable of 333*, 45nm process. The temperature is not high, only more than 30 degrees.

It's comfortable to use, and it's totally great value! It's a good piece, the only drawback is that the original fan is not very ideal.

e5200 it! The performance is better than the other, and the compatibility line will also work.

This configuration overclocking is meaningless and just simple typing can't tell you how to overclock, you can search for a tutorial, the specific thing is to add external frequency, reduce the memory frequency Add voltage Since it's a little white, it is recommended not to toss.