What are the injection molding machines on the market at present, and what brand of injection moldin

Injection molding machine or find Taiwang machinery, 1. Vertical AC DC injection molding machine series: this model is mainly for injection molding of connecting wires, various types of electronics, computer data cables and power plug wires, etc., the precise standard requirements for injection molding products are not high, generally dominated by PVC, PE and other plastic material injection molding, suitable for the specific applicable model specifications of the product generally clamping force from 15T to 35T, due to the specific modulus of each manufacturer's model, configuration and so on. Before purchasing, the manufacturer must be required to go to the factory to determine the specific parameters and specifications of the model. 2. C-type injection molding machine series:

The vertical clamping and horizontal injection of the machine are named because there is no guide pillar and the clamping part is named after the English letter "C". The machine has a complex structure, a large injection volume, and is mainly suitable for all kinds of safety power plug injection molding ,... because of the wide operating area without guide pillars

The quality of domestic LK, Donghua, Haitian, Haida and Chen Hsong is good.

Mainland: Haitian, Haitai, Haida, Taiyide, Ouyilai, Huada, etc.

Hong Kong; Taiwan: All-out development of Chen Hsong in southern latitude.

Imports: Toshiba of Japan Zhuyou Demag and so on.

Mainland: Haitian, Haitai, Haida, Taiyide, Ouyilai, Huada, Shenda, Bochuang Deya.

Hailing Keli.

Hong Kong; Taiwan: All-out efforts to develop Chen Hsong's southern latitudes.

Imports: Toshiba of Japan Zhuyou Demag.

Haitian, some brands of Chen Hsong are standard machines, the company is large, the technology has not improved, and no one in a large company is willing to take responsibility. After a long time, it still can't be drawn. Peers saw that Zhenhua machines were being used, and the brand was not very famous, and the output was much faster than that of big-name machines.

The core motor drive and oil pump are all imported big brands, and the machine thinking of big brands has been limited after a long time. Tried to buy one and haven't been disappointed yet. Every industry is the same, if you don't make progress, you will be eliminated.

I have used Haitian, Chen Hsong, Borche, Garmin, Datong brand injection molding machines, and I am familiar with these manufacturers:

1. Datong injection molding machine: the machine configuration is generally higher than that of its peers, and the machine is especially suitable for acrylic products. The things that the computer uses are Taiwan Allied Power and Japanese Star, which are more professional.

Datong technology is also relatively mature, general purpose machine and special machine are doing well, ** may be more expensive!

2. Haitian: big brand, quality can be, service is in the form of **, the charge is very high, there is no patience with old customers for a long time, and customers are always persuaded to buy new machines, which have strong interests!

3. Chen Hsong: The declining aristocracy, the machine does not have much progress, the localization of parts is serious, and it is relatively cheap.

4 Borche: The marketing team separated from Chen Hsong has done a good job in marketing strategy, but it is often exaggerated.

5 Jia Ming: What is good rigidity, that thing can be eaten as a meal, if you want rigidity, you can buy solid iron directly, buy injection molding machine or pay attention to hydraulic and electrical configuration, especially hydraulic components, pumps, valves and other key things. If you don't care about the quality, you can buy Ningbo's miscellaneous brands directly, a lot!

I recommend: buy Haitian when you buy a brand, buy Datong injection molding machine if you buy quality, and buy a miscellaneous machine in Ningbo if you buy cheap.

Brands really need to choose carefully, injection molding machine detachable flexible heat shield Fei Pufu energy-saving and environmentally friendly reuse.

Generally, foreign brands of injection molding machines are better, and they are more expensive than domestic machines (but you can buy second-hand phones). Nowadays, electric motors are generally used, and hydraulic presses can also be used (cheap). Personally, I think the electric motor is better, there are Toyo, Toshiba, and Nissei.

Domestic general Haitian, Chen Hsong, Yizumi.

Brand machines are like Haitian Zhenxiong.

The above models are all around 300,000.

Cooling tower shredders.

Count 10,000.

The remaining ratio is almost 11-120,000 to buy 160t

7-80,000 buys.

120t such a budget.

It is only possible to buy an assembly machine. The kind of one-time payment.

The new machine is similar, but the failure rate is getting higher and higher over time.

It also depends on the product, how high the requirements are for the machine.

Generally low-priced.

Ningbo machines are.

Procter & Gamble or Samsung or MegaChase

It's all easier to understand and easy to get started.

Good start.

Hongxun Fuji this kind.

Actually, it's not that hard.

If you need a machine, you can contact me.

You can choose Haitian, Garmin, Shenzhen Jianda, etc., but the ** sales are higher. 200,000 can only choose a second mobile phone, and you can hardly buy two new phones.

We do a lot of things in architecture here, Hebei, Haida here, and Haitian, it seems that Haida's is cheaper than Haitian

I have used Zhenxiong, Haitian, LK, Haida, Shenda, these brands of injection molding machines are OK!

The quality of the brand is a personal opinion. Buying the so-called famous brand, one is to show off, and the other is to retreat. The boss loves to show off, suffers from sin, and is slammed after-sales; Managers recommending mainstream brands can evade responsibility and have excuses for not being able to do products; Recommend non-mainstream brands, and take the blame when something goes wrong.

As a result, following the trend one by one, it became a giant equipment factory, lost the pockets of buyers, fattened the so-called executives who were good at mixing scenes, and indirectly became victims of monopoly without knowing it. Send him three words: hahaha.

Ningbo Lisong's injection molding machine is still good, you can consider it.

Guangdong (Jinxin) screw factory quality is strong.

Our company has been using Guangdong Shunde Liansheng injection molding machine, OK,

Now all-electric motor is the direction of the development of injection molding machine, with advantages: precise control, energy saving, low pollution, and low operation requirements.

Japanese: Toshiba, Mitsubishi,..

Europe and the United States: Demag, Zhafir,..

The domestic sea and sky are in general... Engel's good!

What do you care about? What kind of machine do you need for your product?

The so-called good, nothing more than **, service, quality, financing conditions, or comprehensive good, if the product is almost no requirements, **sensitive, and nothing more than service and financing, buy miscellaneous machine if the product is almost no requirements, **not sensitive, buy brand machine if the product is almost no requirements, **not sensitive, care about financing conditions, buy financing conditions are good, if the product has requirements, buy can meet your product requirements, **and other convenience, followed by if the product has requirements, several can meet your requirements,** If the product has requirements, several can meet the requirements, ** and almost, the brand has about the same, buy good after-sales service.

If the product has requirements, several can meet the requirements, ** is almost the same, the brand is similar, the service can also meet the requirements, buy what you feel comfortable to talk about.

Whether it is Haitian, Zhenxiong, Lijin, or Haida, starfish, and seahorse are right for you.

It is recommended to go to a professional second-hand equipment platform to understand the comparison, which is more intuitive. There are many brands, take a look at the more popular models discussed, and then weigh what suits you.

The domestic injection molding machine brands are:

Haitian, Zhenxiong, Zhende, Yizumi, Donghua, Huada, Hairi, Haida, Haiying, Yongjiang, Haibao, Xinxie, Cost, Ningsu, Kaidiwei, Enge, LK, Haixiong, Glen, Jiaming, Borche, Haixing, Haitai, HNA Baojie, Haitong, Yonghua, Hongli, Liansheng, Sanshun, Jinxing, Hengrun, Shenda, Shuangma, Bole, Hongda, AGCO, Hongqiao, Liguang, Zhongtai Seiji, Liguang, Hongli, Yongjiang Factory, Tejia, Jianda, Liyuan, Apollo, Jiwei, Hairun, Shiyao, Yongtai, Energy, Lima, Hongtian, Liusu, Guangsu, Rongsheng, Daming.

Taiwan, China. Chen Hsong, Baisu, Liansu, Taichung Precision Machinery, Full Force, FCS, Chaoqun, Qunji, Huarong, TMC, Lianfa Precision Machinery, Yasu, Fengtie, Jinji, Nanrong, Congwei, Yizhan, Shunzhan, Huaqin, Formosa Plastics, Yinai.

Hong Kong, China. Chen Hsong, Hang Seng, Renxing, Yilida, Baoyuan, Yiguang, Quansheng, Auckland, Yeqin, Baterin.

Japan's Fanuc, Sumitomo, Toyo, Toshiba, Nippon Steel, Nissei, Sodick, Naki, Ube, Kawaguchi, Mitsubishi, Niigata, Hishiya, Kawagang.

South Korean ls Woojin Hyundai Dongshin.

American boy Cincinnati remusig husky baston babyplast

Germany Battenfeld, Krosma, Fedema, Gemiracron, Arburg.

New Dedo, Italy.

Swiss Nessset.

Engel, Austria.

Let me be fair, engaged in the injection molding industry for more than ten years, many injection molding machine brands have been used, several leading enterprises in the industry machine quality and service gap is not big, now some brands may not be known to you, but the machine quality and service are done well, now the injection molding machine manufacturing is not too high-tech, the domestic industry has been more than 60 years, there is no lack of technology, the lack of product positioning and service awareness. I have used a brand called Youzhu injection molding machine, and I feel that it is very thick, and I can see that I am making products with heart, which is what I value the most.

"Dream of Red Mansions" book shadow"Dream of Red Mansions" book shadow.

You can try to buy a pressure injection molding machine, the machine is stable, and the price is very high. **Also offered.

Ningbo Yisu injection molding machine is relatively good, and now the injection molding machine has increased the output by 30% in Haitian's production capacity, and the effect of energy saving and environmental protection is also very good, which is a very good brand.

HNA injection molding machines are the most rubbish, and design engineers eat.

In China, there are Haitian Plastics Machinery, Borche, Yizumi, Haida Plastics Machinery, Donghua, Tederic Machinery, Zhejiang Plastics Machinery General Factory, Zhejiang Shenda, Shuangma, Ningbo General Plastics Machinery, Haixiong Plastics Machinery, Chuangji, Golden Eagle Plastics Machinery, Haixing, Taiwan Yasu, Haiying, Haida, Haijing, Haihua, Haibao, Haitong, Donghua, etc.

In the mainland market, Ningbo machinery occupies 60% of the country. At present, among the foreign brand machines in use, the Japanese machine has the highest usage rate, followed by the European machine, and the proportion of both has reached more than 40%.

The well-known domestic high-speed injection molding machine brands include Dekuma, Guangdong Chunchun Donghua, Guangdong Liansheng, Dounai Bochuang, Yizumi, Chen Hsong, Ningbo Haitian, and LK.

The injection molding machine is an all-electric motor, and the usual injection molding machine is a hydraulic injection molding machine, and the hydraulic injection molding machine is relatively slow to run at a slower speed. At present, the servo motor used in the all-electric injection molding machine realizes the opening and closing of the mold, the ejection and demolding, and the injection and storage of raw materials. And so on, the operation speed is fast and precise, which greatly improves or improves the production environment and production efficiency.

However, servo-electric injection molding machines are currently only available with clamping forces of up to 850 tons.

Injection molding machines have the ability to form complex shape, precise size or dense plastic products with metal inserts at one time, which are widely used in national defense, electromechanical, automobile, transportation, building materials, packaging, agriculture, culture, education and health and people's daily life.

Injection molding machines are also known as injection molding machines or injection machines. It is the main molding equipment for making thermoplastics or thermosets into plastic products of various shapes using plastic molding molds. It is divided into vertical, horizontal, and all-electric type.

The injection molding machine heats the plastic and applies high pressure to the molten plastic, causing it to be injected and fill the mold cavity.

Top 10 injection molding machines in China.

The main brands are Haitian and Terry.

Yizumi, Grand, Borche, Hongda, Hongli, Starfish, Dongfang, etc., there is no specific ranking here, mainly the well-known injection molding machine brands, probably introduce the first three injection molding machine brands.

Top 10 Injection Molding Machines.

1. Domestic injection molding machine brand copy.

There are: Haitian Plastics Machinery, Borche, Yizumi, Haida Plastics Machinery, Donghua, Tederic Machinery, Zhejiang Plastics Machinery General Factory, Shuangma, Ningbo General Plastics Machinery, Haixiong Plastics Machinery, etc.

Ningbo Haixiong Plastic Machinery Co., Ltd.: Ningbo Haixiong Plastic Machinery Co., Ltd. was registered and established in Ningbo Beilun District Market Supervision and Administration Bureau on January 22, 2003. Chen Zhengming, the legal representative, the company's business scope includes the manufacturing, assembly, wholesale and retail of plastic machinery and its accessories.

Haitian Plastics Machinery Group: Haitian Plastics Machinery Group is one of the subsidiaries of Haitian International, Haitian Plastics Machinery Group has been in the leading position in the same industry in the world, the company's product positioning is clear, for the rapid growth of the production field of generalized plastic products, actively adjust its production layout, by strengthening the standardization of product processing, the use of corresponding assembly processes, and constantly improve their production efficiency.

Ningbo General Plastic Machinery Manufacturing: Ningbo General Plastic Machinery Manufacturing Co., Ltd. was registered and established in Haishu Branch of Ningbo Administration for Industry and Commerce on August 31, 2004. Zhang Yunsheng, the legal representative, the company's business scope includes plastic injection molding machines, injection molding precision cavity molds, general plastic machinery and equipment, etc.

The brand of injection molding machine is one of the important factors affecting the user's choice, and it is particularly important to choose a satisfactory brand. The following European injection molding machine brands:

Engel Engel (Austria) Nestet (Switzerland) Germany has a lot, Barton.

Our factory has bought it very much.

The quality of many domestic injection molding machines is also OK. But to be honest, Haitian feels that it is too expensive to me, and from time to time we are always asked to buy a new machine from them. And although Borche and Baiyi's Secret can also do it now, they are just the marketing team that Chen Hsong came out of, and what they say is better than singing, and ** is also on the high side.

Chen Hsong's words are that there is not much innovation in the old brand, but there is really nothing to say about quality and **. If you know that you pursue the brand, then buy Engel directly, but if you pursue cost-effective, I really recommend that you buy Zhenxiong, if you want to buy cheaper, buy Ningbo miscellaneous machine.