Is it better to make epoxy flooring or hardened flooring on the floor of the factory?

1. Treatment of epoxy floor surface 1. The newly completed industrial floor must be cured before construction, about 28 days. 2. Remove the cement slurry, old paint and adhered garbage and debris on the surface. 3. Completely remove the oil stain on the surface and treat it with the cleaning agent of Keyouwang.

4. Remove stagnant water and dry the tide thoroughly. 5. The cleaning of the surface needs to be completed by a dust-free sweeper and a large vacuum cleaner. 6. The allowable void of the flat surface is 2, the water content is below 6, and the pH value is 6 80.

7. The hairing of the floor surface needs to be completed with a dust-free grinder and thoroughly cleaned with a vacuum cleaner. 8. Apply putty to the holes and obvious depressions on the surface of the floor to fill the batch scraping, and polish and vacuum after drying. 2. Finishing and sealing coating 1. In the treatment of clean and smooth concrete surface, high-pressure airless spraying is adopted....

Personally, I think hardened flooring is better, because the quality of hardened flooring is better, such as hardness, wear resistance, etc., will be better than epoxy flooring. For example, Bangdimei has done many cases of epoxy flooring being transformed into hardened flooring, so it can be seen that hardened flooring will be more durable.

Epoxy flooring and cured flooring have their own advantages.

I.1Epoxy flooring is used in electronics, electrical appliances, hardware machinery factories, tobacco factories, pharmaceutical factories, food processing workshops, supermarkets, laboratory buildings and other grounds.

2.The cured floor is used for concrete, terrazzo or steel sand hardener ground such as general high-hardness military facilities, national defense, air-raid shelters, tunnels, large bridges, electric power, warehousing and logistics centers, docks, shutdown bangs, heavy machinery workshops, aircraft maintenance hangars, etc.

II.1Epoxy floor is a high-strength, wear-resistant, beautiful floor, with no joints, solid texture, good chemical resistance, anti-corrosion, dust-proof, easy maintenance and other advantages. A variety of schemes can be designed according to different use requirements:

Such as thin layer coating, 1 5mm thick self-leveling ground, anti-slip and wear-resistant coating, mortar coating, anti-static, anti-corrosion coating, etc., but more than 5 years will basically be damaged and warped, and the maintenance cost is high.

2.Concrete sealing curing agent flooring: It is a concrete sealing, dustproof, wear-resistant hardener.

It is a new generation of lithium-ion water-based products, colorless, odorless, non-toxic and non-flammable. Through effective penetration of 3-5mm, a series of complex chemical reactions occur with free calcium and magnesium ions in the concrete, forming a network structure in three-dimensional space, so that the various components in the concrete are solidified into a solid entity, so as to obtain a dust-free, dense whole, the capillary pores are effectively sealed, and the precipitation of concrete dust from the surface is permanently avoided. Effectively improve strength, density and wear resistance.

Teaching epoxy flooring and curing floor technology (basic construction, material consumption, process matching, cost accounting, problem solving) can be privately messaged to me.

Summary. To make epoxy floor paint, you need to use dust-free grinders, scrapers, trowels, rollers, masking paper, tape measures, quartz sand, quartz powder, thinner materials, etc.

To make epoxy floor paint, you need to use dust-free grinders, scrapers, trowels, rollers, masking paper, tape measures, quartz sand, quartz powder, thinner materials, etc.

Do a good job in epoxy floor engineering, nothing more than materials and construction messy Lu Jian, materials, raw material resin is 128 liquid resin, the content is more than 60%, there is a curing agent, there are good and bad on the market, and finally ask more; The second is construction, as the saying goes, three points of material and seven points of construction, the construction accounts for a large amount, why do you say so, one is the construction technology, the other is the amount of construction; Good construction technology can deal with different problems on the ground, and avoid the problem of peeling and bulging and shortening the service life in the future; During the construction process, the amount can not be reached will also shorten the service life, so many users only ask about the low**, the same process, some are high and some are low, ** is not indiscriminately reported, the materials used are not the same, the amount is not the same, the two knives on the market are low, and the quality of the floor is very poor, and the skin is bulging in less than half a year, and the wear resistance is very poor. Each square meter of epoxy floor is designed according to the actual ground conditions, and then the analysis table is made.

Sincerely for slipping which you answer every question is the best if you are satisfied. Your praise is the driving force for us to move forward, looking forward to getting your letter buried in the code like, is it okay? Have a great day and see you soon! Liquid macros.

Construction engineering construction and epoxy floor construction are two different fields that cannot be directly compared. Below I will briefly introduce the features and advantages of these two areas to help you make your choice: Construction Engineering:

Wide range: The construction of construction projects includes various types of projects such as construction, civil engineering, roads, bridges, etc., and involves a wide range of fields. Long-term investment:

Construction projects are usually large-scale, long-term investment projects that involve multiple phases of planning, design, construction, and operation. Multidisciplinary Integration: Construction engineering requires multidisciplinary expertise and coordination, including engineering design, structural, civil engineering, electrical, mechanical, etc.

Epoxy Floor Construction: High Abrasion Resistance: Epoxy Floor Construction is commonly used in industrial and commercial locations and has excellent abrasion and chemical resistance, and is able to withstand heavy pressure and frequent use.

Aesthetically pleasing and easy to clean: Epoxy flooring has a smooth, glossy surface that is easy to clean and maintain, while being designed and decorated as needed. Rapid construction:

Compared with some traditional ground pavement methods, the construction period of epoxy flooring is relatively short, which can quickly complete the construction and reduce downtime. The choice between construction and construction and epoxy floor construction depends on your needs and specific situation. If you need to carry out large-scale construction projects, such as house construction, bridges or roads, then construction works are necessary.

And if you need to renovate and protect the floor of an industrial or commercial place, epoxy floor construction can be an excellent choice. The final decision should be based on your specific needs, budget, and project requirements.