What are the advantages of multi layer panels over solid wood?

Solid wood multi-layer board, also known as plywood, is a series of planks in which some wood is rotary cut into veneer, or some stakes are planed into thin wood, and then glued into three or more layers of thin boards with good adhesives. Multilayer board has many advantages over solid wood, such as light bulk density, high strength, beautiful texture, insulation, etc.; It can make up for some of the defects naturally produced by natural wood, such as knots, small width, deformation, and large differences in longitudinal and horizontal mechanics.

Compared with solid wood, it can also save social resources. The use of solid wood multi-layer board is very extensive, and the common ones are mainly used for the bottom plate of decorative panels, drawer side panels, drawer bottom plates, bed side panels, bed boards, headboards, wooden doors, cabinets, sofas, handicraft cabinets, wardrobes, tables, chairs and other furniture; Interior decoration such as ceilings, wall skirtings, floor linings, etc. Uses and advantages of solid wood multi-layer boards.

The production of solid wood multi-layer board is very resource-saving from a large aspect, it can fully use the original wood, no sawdust, no waste of wood, the production process, but also produce a large number of MDF and particleboard, these are better raw materials in home decoration, it can be said that the wood utilization rate to the extreme. What are the advantages of multi-layer board, such as multi-layer board is a highly environmentally friendly material and does not contain all substances harmful to human health; **Value; High density, the production process is through high temperature and high pressure, therefore, the pressure resistance of the plate is very strong; No degumming, the volatility of the glue used is particularly low, and it will not degum without external force.

The advantages of multi-layer board are because it is multi-layer drilling and pressing, because of the high density, no, the volume will be relatively small, and the weight is relatively light, because the density is high, and the space distance is reduced, so it is not so easy to break, that is to say, the stability is more reliable, the number of layers is more, which increases the flexibility of the design, so as to be widely used, because of these advantages, there are relatively some shortcomings, such as high cost, long production time, difficult detection, etc., but these deficiencies do not affect the use of multi-layer board at all. Multi-layer board is the inevitable product of the development of building formwork in the direction of high efficiency, multi-function, large area and small volume. With the continuous development of multi-layer board technology, especially the extensive and in-depth application of large templates and super-large templates, multi-layer boards are rapidly developing in the direction of high density, high precision, and high-level digitization, and technologies such as fine lines, small aperture penetration, blind holes, buried holes, and high plate thickness ratio to meet the needs of the market.

The advantages and disadvantages of multi-layer boards are concerned in our daily life. Multi-layer solid board retains all the advantages of natural solid wood flooring, not only the natural texture and elasticity of solid wood flooring, but also overcomes the common problem of natural solid wood flooring that is easy to expand and shrink and deform, and has the characteristics of laminate flooring resistance to deformation, corrosion resistance and easy cleaning, multi-layer solid wood floor is a new trend in floor purchase. Due to the multi-layer glue compound, the solid wood multi-layer floor has good waterproof performance and can be used for more humid floors and areas.

The solid wood multi-layer flooring has been treated with insect resistance, and the use of environmentally friendly glue can effectively prevent insect erosion and is non-toxic to the human body; The foot comfort of solid wood multi-layer flooring is no different from that of natural solid wood flooring, and the paving method is basically the same.

Nowadays, most people's furniture in their homes is based on what kind of furniture, such as wardrobes, cabinets, shoe cabinets, these furniture will use multi-layer solid wood boards. And the advantages of this material of multi-layer solid wood board are also very many, the stability is better, the first is also more affordable, usually very good at home, wear-resistant, and the decoration workers are relatively simple to install when decorating, so many people like it very much, and the cost performance is also very high. <>

First, the advantages of multi-layer solid wood boards

1. The advantage of multi-layer solid wood board is that the stability is relatively good. Because the multi-layer solid wood board is made of many layers of wood staggered and horizontal, the structure is also relatively unique, resulting in the stability of the multi-layer board is very good, even if it is placed at home, there is no need to worry that the wood board will be deformed by moisture, so it is usually more durable and durable even if it is used as a floor.

2. **Relatively affordable. Although the amount of wood used in multi-layer solid wood boards and real solid wood boards is indeed very different, there are also more places used in life, so compared with solid wood boards, it is much more affordable. <>

3. Easy to take care of. Most of the multi-layer, what floor surface paint is very good, and it is also more wear-resistant, with a protective film, so after you buy multi-layer furniture, you don't need to spend too much energy on maintenance, which is more worry-free. Because most of the multi-layer hardwood flooring on the market can be waxed for three years, it can still keep the floor as good as new.

4. Easy to install. Under normal circumstances, multi-layer solid wood boards do not need to be keeled when installed, only need to be leveled on the ground, and the installation speed is much faster than that of solid wood floors, so many consumers prefer it. <>

2. Conclusion

Therefore, relatively speaking, the advantages of what base plate is still very much** is more close to the people, and after installation, you don't have to worry too much, you don't need to take care of it often, and it is also more worry-free in the process of installation, and the stability is relatively strong, which is very worth choosing.

1.Good stabilityMulti-layer solid wood boards are mostly staggered structures, and the unique structure makes the multi-layer solid wood boards super stable, so in some humid and special environments, multi-layer solid wood boards will not be deformed.

2.Good value for moneyMulti-layer solid wood boards have the texture and feel of solid wood, but the amount is less than that of solid wood, so it is much cheaper than solid wood, and it is a cost-effective decoration material.

3.Easy to care forThe surface treatment of multi-layer solid wood board is better, the wear resistance is higher, and it does not need to take a lot of time to take care of.

The advantage is that it can insulate heat, and it can also isolate noise, can play a wear-resistant effect, the service life is relatively long, the cost performance is relatively high, and it can be used on the floor or can also be made into a wardrobe.

Solid wood multi-layer board is very high-grade, more environmentally friendly, has a long service life, is very easy to take care of, and has the effect of value preservation. The cost performance of multi-layer boards is very high, because this kind of board looks very smooth and very high-end.

Very strong, good material and can be used for a long time. The cost performance is very high, the price is directly proportional to the quality, and it can make us use it for a long time.

The multi-layer solid wood plank has a unique staggered structure, which makes it very stable and will not be deformed due to moisture, will not crack due to drying, etc. So it's perfect for underfloor heating. If you use multi-layer solid boards for furniture or floor decoration, you need very little consumption, so you don't need solid boards, so the characteristics are more affordable.

The surface of this sheet has been painted, which increases the wear resistance of the surface. The multi-layer solid slabs do not need to be bothered to be maintained, and the paint surface can remain shiny and new for a long time. Multi-layer solid wood panels are very suitable for all kinds of furniture, and are more environmentally friendly than particleboard.

The multi-layer solid wood board cannot be repaired after being damaged by soaking in water, and the foot feeling is worse. Multi-layer solid wood boards need to be carefully maintained, and daily attention should be paid to waterproof, scald-proof, and sun-proof, otherwise they are easy to be deformed by the environment. Multi-layer solid wood panels are made by drying, degreasing, curing, and then slicing.

Its surface requirements are high, and there are no defects such as rot, dead knots, wormholes, cracks, epidermis, etc. Multi-layer boards are not suitable for surface engraving, and many people in the industry know it. There will be burrs after engraving, and engraving is not recommended.

Most solid wood laminates consist of a solid wood surface layer and a solid wood base layer.

The quality of the surface has a great impact on the appearance and longevity of parquet. Usually, the surface layer is made of wood through layer processing, and there will be no corruption, dead seams, wormholes and other problems on the surface, but the requirements for small slipks and color differences on the surface layer are not too high. Health and environmental protection is a good advantage of multi-layer solid wood boards, because in the processing process, due to the integrity of the wood, more liquid glue can be avoided in the processing, and formaldehyde, a common source of pollution for decoration, is lurking in the liquid glue.

Judging from this situation, multi-layer solid wood plank plywood is more environmentally friendly and healthy. The unique processing steps of multi-layer solid wood panels make multi-layer solid wood panels more durable and durable.

Multi-layer solid wood plank has good anti-corrosion performance: because the surface layer of multi-layer solid wood board is made of wood after drying, degreasing and solidification, the surface should not have defects such as decay, dead knots, wormholes, cracks, crusts, etc., but for small slipknots, the color difference should not be too high, because this is the natural attribute of wood. In some places, the moisture content of multi-layer solid wood panels is generally 5%-14%.

But multi-layer boards also have corresponding disadvantages: multi-layer boards are suitable for all kinds of furniture and are more environmentally friendly than particleboard. However, the multi-layer solid wood board blisters cannot be repaired after they are damaged, and the foot feeling is also very poor.

Compared with other materials, multi-layer solid wood panels need to be carefully cared for, and attention should also be paid to care, waterproof, anti-scald, and sunscreen; The resources of multi-layer solid wood panels are getting less and less, and they are easy to deform due to the rigidity of the environment.

Solid wood multi-layer board, also known as plywood. Solid wood multi-layer board is made of criss-cross multi-layer board as the base material, and high-quality precious wood is selected as the panel, which is made by high temperature and high pressure in a hot press. **。

The advantages of solid wood multi-layer board are that it has strong compressive ability, is not easy to deform and crack, the dry shrinkage and expansion system is very small, and has a relatively good ability to regulate indoor temperature and humidity. Compared with solid wood, it can make up for some of the defects naturally produced by natural wood, such as small format, knots, deformation, large differences in vertical and horizontal mechanics, etc. Solid wood multi-layer boards also have advantages in terms of high standards, and multi-layer solid wood boards are more economical than expensive solid wood boards.

Because it is pressed with multi-layer veneer, the waterproofness and stability of the solid wood multi-layer board are very good, the strength of the solid wood multi-layer board is related to its base layer, each additional layer, its strength will be correspondingly enhanced, of course, its ** will also increase accordingly. Solid wood multilayer board combines the advantages of MDF and particleboard. It not only has the stable structure, moisture-proof and moisture-proof of MDF, but also has the light weight and easy to move of particleboard, and there is no difficulty in processing solid wood, can not be disassembled and assembled twice, and is not easily affected by the environment.

It can shelter from the heat or the cold, the house will not be too hot in summer, and the house will not be too cold in winter, which is very practical and cost-effective.

Its advantage is that it is very durable, and it is also very cheap, the quality is very good, and it is also very non-slip and moisture-resistant. There are a lot of families that use this plank. And the value for money is very high.

Its advantage is that it is particularly stable, and its ** is also very cheap. It is very cost-effective, and this board is also particularly healthy and environmentally friendly.

Solid wood board multi-layer board is made of three or more layers of veneer or thin board glue heat pressing, with a unique staggered structure and very good stability, will not be deformed due to moisture, will not crack due to drying, so it is very suitable for floor heating. The solid wood board multi-layer board does not need to be bothered to do maintenance, and the paint surface can stay as bright as new for a long time.

Let's talk about the various flooring on the market. Flooring is divided into pure solid wood flooring, three-layer solid wood flooring, multi-layer solid wood flooring and laminate flooring. Among them, the pure solid wood floor is based on different wood species, plus the installation cost, generally ** in 300 yuan per square meter.

Three-layer solid wood flooring, generally ** in 260 yuan to 350 yuan per square meter. Multi-layer solid wood flooring, ** in 120 yuan to 200 yuan per square meter, small sawdust home is 145 yuan per square meter. The laminate flooring ranges from 40 yuan per square meter to 200 yuan per square meter.

1.The structure is stable and the force is uniform. The production process of multi-layer board is made by arranging a layer of veneer horizontally and vertically, applying pressure, and due to this structure, the finished product of multi-layer board is more stable and durable in terms of performance.

2.Easy to care for, the surface of the multi-layer solid wood floor is well painted, the wear resistance is very high, and it does not take too much effort to maintain. The best multi-layer solid wood flooring on the market can be left unwaxed for 3 years, and the paint surface can be kept as bright as new.

3.The raw materials are easy to control and the environmental protection is guaranteed. The raw material of multi-layer board is veneer after rotary cutting of Dajing wood, without adding some waste scraps, waste flooring, waste cartons, soil and gravel, etc.

The raw material of the multi-layer board can be directly seen through the cross-section of the plate, which is easier to control, and the environmental protection level is rapidly improved after the use of formaldehyde-free glue.

4. Affordable, the amount of wood used in multi-layer solid wood flooring is not as large as that of solid wood flooring, so it is much cheaper than solid wood flooring.

When choosing a multi-layer board, in addition to paying attention to its advantages and disadvantages, the multi-layer board manufacturer should be more strictly investigated.