Is there any way to save a wooden wardrobe from mildew?

You should know that if the fungus is moldy to a certain extent, it will rot and deteriorate. The fungi that cause fungi by wood fungi include fungi of the subphylum Ascomycetes and the subphylum Hemimycetes, mainly fungi, fungi, fungi, etc. The most important of the fungi is the green fungus, and the surface of the wood infected with this fungus is green.

There are many types of Penicillium and Aspergillus, the most common being Aspergillus. When the wood is infected with fungus, the surface turns black. The resistance of fungi to adverse conditions is greater than that of wood decay bacteria, and the resistance to preservatives is also better than that of wood decay bacteria, and many molds can also resist high temperatures.

Under the right conditions, the fungus can also cause soft rot of the wood. Therefore, the requirements for wood mildew prevention selection are higher than wood preservatives.

The wood itself is a nutrient for the fungus and is exposed to the air, where moisture, fungus, and temperature are the main causes of wood mold. Therefore, advanced treatment of wood with antifungal agents and air-insulating coatings are the best way to prevent wood mildew. Due to various reasons such as shape, size, size, and appearance requirements, many wood structures cannot be treated with antifungal agents.

In order to prevent mold from the timber structure, the coating must be mildew-resistant. The main ingredients are fungal decomposition factors and bactericidal inhibitors, which can remove various bacteria, fungal insects and fungal spores caused by product mold.

It is characterized by penetrating the material within 5 mm of blue mold, which is colorless, non-toxic, safe and environmentally friendly. It is suitable for anti-mildew treatment of wood, furniture, wood, walls and crevices. When using, according to the severity of the mold, increase the dose according to the severity, generally slight mold changes can go out in 3 5 minutes, and in severe cases, it takes about 1 hour, and the specific mold removal time is subject to the actual situation.

Open the wardrobe, remove all the clothes, and remove mold from the wardrobe. Keep your wardrobe ventilated. At this time, tidy up the clothes, and the moldy clothes must be washed again.

Then, after all the clothes have been completely cooled and dried, it is best to dry them in the sun for two hours. If the weather is wet, you can use a hair dryer to dry it.

Laying dry newspaper on the bottom of the cabinet can absorb some moisture. Then put your clothes away and don't make the cloakroom too crowded. Finally, use a hair dryer to ventilate the entire wardrobe for 2 minutes.

Close the closet. Pay more attention to the weather, and when it is wet, you should bask in the sun or ventilate. Please keep a roll of waste paper (with a paper core) near the cabinet.

If one day you find that the paper is loose (i.e. there is a large gap between the paper and the core, it becomes soft, and the room is damp, pay attention to mildew).

Spread dry newspaper at the bottom of the wardrobe to absorb some moisture, put the clothes away, don't let the cloakroom be too crowded, use a hair dryer to ventilate the entire wardrobe for two minutes, usually try to bask in the sun, mildew and moisture.

1.Pay attention to clean up the moldy place, generally with a dry paper towel or a dry brush for brushing;

2. If mold is found, wipe the mold clean and then brush the varnish on it to prevent further mold.

3. The humidity is too heavy, so keep the wardrobe dry. For example, put some desiccant and dried orange peel in the wardrobe.

Wipe with a clean cloth, then spray with a disinfectant a few times, and expose the wardrobe to the sun for an additional few hours.

Brush the wardrobe clean with a dry brush and let it be ventilated so that there is no dampness and mold.

The long mold belongs to the bulbous shell mold, which belongs to a mold with a rapid reproduction rate.

The wardrobe can grow mold because the wooden cabinet itself contains certain nutrients, and when the cabinet is damp and has moisture, mold will grow.

The mold that grows is basically not clean, because the white mold we see is basically its hyphae, and it will also have a large number of spores that are invisible to the naked eye (commonly called seeds), as long as the environment is suitable, the spores will still grow again.

If you want to clean it, you have to kill the mold spores, usually what you have to do is to wipe some disinfectant alcohol, if the disinfectant alcohol can't kill it, buy some antifungal agent to spray, this can definitely ensure that there will be no more mold.

Moldy growth is due to the need to absorb too much water on the plate. Your wardrobe should not be made of solid wood but glulam panels, which can absorb a lot of water and are easy to dry at room temperature. Plywood will not actively release moisture, but can only be baked at a high temperature to remove moisture.

Try it in the sun.

Use a hair dryer to blow hot and blow once or twice in ten rainy days.

The mildew of an article is not only related to the ambient temperature, but also to its own moisture content and the moisture content of water vapor in the air. According to scientific research, mildew in different items has different requirements for temperature and humidity conditions. For example, when the temperature of the granary is 20 to 35 and the air humidity is 85%, the grain crops are prone to mold.

Paper cigarettes and other goods, when the temperature reaches 15, the air humidity will be 85% mildew, in other words, when the temperature is relatively high and the air humidity in the air is relatively low, Aspergillus flavus can also adhere to the surface of the material to breed and grow.

However, for most other products except the food industry, when the temperature is < 30 and the air humidity is < 80%, it is not easy to mildew. The first thing you see is mold in the cabinet is to remove the moldy position, and you can use a paper towel or a dry soft brush to solve it. If this does not work, get a damp rag and scrub it with detergent and disinfectant, etc., and then use a dry cloth and dry it.

If possible, you can also brush the moldy area with paint or apply a layer of wax to prevent it from becoming moldy again.

Be sure to pay attention to the dryness of the surrounding environment, such as maintaining natural ventilation and putting some activated carbon or moisture-proof agents in the cabinet. Wipe it with a cloth first, and then brush the top coat all over it, so it won't grow mold, wipe it with dry toilet paper, or brush it with a brush and wipe it with dry toilet paper. If you really can't get rid of the mold, just take a wet toilet paper or cotton towel and wipe it vigorously.

If the house is too humid, bacteria and viruses can easily grow, resulting in frequent mold. Pay attention to frequent indoor ventilation. Never use an air humidifier in the room.

After mopping the floor, pay attention to open the window for ventilation or turn on the fan and ** air conditioner to dry the water immediately. In addition, adding some orange peel to your wardrobe will also work well.

Mold is due to the fact that the paint is painted less frequently, and at the same time, the poor quality of the paint will lead to mold. If the weather is good, you can open the cabinet door for air circulation, maintain the wardrobe open for air circulation for one to two days, brush a layer of wood special anti-mildew paint, and wait for it to dry and brush again. Naturally, the anti-mildew paint on the market is uneven, and some have a smell, so I suggest you choose carefully.

If you don't want to use anti-mildew paint, you can also buy moisture-absorbing bags and activated carbon moisture-proof agents and put them in the wardrobe (there are more such products on the Internet now, which are convenient and easy to use) to reduce the humidity of the wardrobe environment and prevent mold.

It may be because the quality is not very good, or the environment at home is too humid; Put it in a sunny place to dry, and pay attention to maintenance.

Most of it is caused by the humid climate, so it must be cleaned up in time, and you can also put some moisture-absorbing items.

Wooden wardrobes are generally prone to mold, which is also caused by too much moisture and moisture in the home. Attention should be paid to opening windows for ventilation and putting dehumidifier inside the wardrobe.

Wardrobe mildew removal tips one.

When there is mold in the wardrobe, you should first pay attention to clean up the moldy place, which can generally be wiped clean with a dry paper towel or brushed with a dry brush to clean the moldy place. If the brush is not clean, just wipe vigorously with a damp cloth, which can often be very convenient to remove mildew.

Wardrobe mildew removal tips two.

If mold is found, in addition to wiping the mold with a cloth, we also need to brush the varnish on it again, so that it can effectively prevent further mold. Moldy is mostly caused by paint problems, so we can also use the rainforest to clean it and then wipe it with a clean cloth.

Wardrobe removal tips three.

The air is humid and easy to mold, so we can put some quicklime at home, which can not only effectively prevent moisture, but also have the effect of disinfection. If there is too much moisture in the wardrobe, you can put a tungsten light bulb in the wardrobe and turn it on when it is wet, which can effectively reduce the moisture in the wardrobe and keep the wardrobe dry.

Wardrobe mildew removal tips four.

Mold into our home, will cause some respiratory diseases, in order to prevent this, you can put some desiccant in the wardrobe, can absorb the excess water in the wardrobe, make the wardrobe drier. At the same time, we can put some orange peel in the wardrobe, which can also receive the effect of fresh smell and environmental protection, and pay attention to opening the window from time to time to ventilate. After we usually mop the floor with a wet mop, we should also pay attention to opening the window for ventilation.

Summary: Wardrobe mold not only affects our home environment, but also the production of mold is harmful to our health, so we must pay attention to timely cleaning and maintenance of the wardrobe!

1. Once mold colonizes in the home environment, you may have to endure asthma or other breathing problems. You can put some desiccant or mothballs to keep the wardrobe dry and absorb excess water.

Second, wipe it off with a cloth first, and then brush the varnish so that it will not grow mold.

3. Wipe it with a dry paper towel, or use a brush to wipe it with a dry paper towel. If you still can't get rid of the mold, just wipe it vigorously with a damp paper towel or towel.

Fourth, mildew is because the number of paint is too small, and the poor quality of the paint will lead to mold. You can wash with a rag coated with petroleum jelly and wipe with a clean cloth.

5. Clean up the mildew first, and then place it in a ventilated location to dry naturally, or use a hair dryer fan to dry, and place a large amount of desiccant in it when you use it again.

6. Remove the mildew with sandpaper or other things. Repaint.

Cabinet is a more common type of furniture products used in daily life, and furniture should be selected in the purchase of practical and cost-effective furniture. Of course, it is also common for wooden cabinets to become moldy due to a variety of reasons, so how to deal with moldy wooden cabinets. Cabinet is a more common type of furniture products used in daily life, and furniture should be selected in the purchase of practical and cost-effective furniture.

Of course, it is also common for wooden cabinets to become moldy due to a variety of reasons, so how to deal with moldy wooden cabinets and what is the specific way. What is the daily maintenance method of furniture, these related contents are a good reference for caring for the home.

How to deal with moldy wooden cabinets

After the solid wood cabinet is moldy, you need to adjust the cabinet to a position that can avoid direct sunlight and away from water sources in time, remove the mold with a rag, and then apply a layer of wax oil on it to prevent the residual mold from coming into contact with the air. Usually, you also need to put some desiccant to reduce the humidity of indoor air, and pay attention to indoor and outdoor ventilation.

Daily maintenance methods of furniture

Wooden furniture is generally divided into panel furniture and solid wood furniture, which contains different materials, and its maintenance methods should also be treated differently

panel furniture. The most important place to pay attention to is the seam of the panel furniture, which is the most susceptible to moisture in the panel furniture, if not treated, it will cause the furniture to crack or even deform.

In our daily life, we must keep the furniture clean and hygienic, especially the joints, when cleaning, you can wring out the damp cloth, wipe and clean, and finally be sure to wipe it dry with a dry rag. If it is in a humid environment, it is recommended to put a packet of activated carbon next to the furniture to dehumidify.

If there are signs of dampness, then we must first pay attention to whether it is ventilated, and a packet of activated carbon can be placed on the damp part for dehumidification.

Solid wood furniture. Compared with panel furniture, solid wood furniture itself does not carry out special moisture-proof treatment, we should also pay attention to this when maintaining, and after the solid wood furniture is damp, the change is obvious, the surface will change color and even breed mildew, and if you do not deal with it for a long time, it will lead to expansion and deformation and cracking of the damp place.

The maintenance of solid wood furniture is more cumbersome, it belongs to high-end furniture, daily maintenance requires special detergents for maintenance, and regular waxing is required, not much to say here, you can search on the Internet. To prevent moisture, you can put a packet of activated carbon inside to dehumidify.

The above content introduces how to deal with the problem of mold in wooden cabinets, after mold, the cabinet should be adjusted to a position far away from the water source, and it is also necessary to prevent mold and air contact, and these related treatment methods need to be understood and clear. The daily maintenance method of furniture can be referred to more, according to the difference between solid wood furniture and panel furniture to divide the maintenance method, so it is necessary to maintain according to the different furniture.