How to open the public toilet door and unlock the toilet door?

Public toilets. The door is generally not a high-end lock, and the deadbolt has a bevel.

This can be used, find a card type that you don't use, has a certain hardness and is thin.

Insert the tongue into the crack of the door, and pay attention to the slope of the deadbolt, only outward-facing ones. If it is facing inward, you can use a thin iron sheet to cut it into a hook, insert it from the high point first, and then press down to pull it outward.

What should I do if the bathroom door is locked? Don't worry, just one coin and a few seconds to open quickly.

1. If the bathroom is a lock without a keyhole, you can use a flathead screwdriver to insert it into the groove at the keyhole position and twist it to the right to open it.

2. Or find a key similar to the original key style and try to open it; You can also find discarded IC cards and the like; If none of the above methods work, you can only use tools to remove the lock or find a professional locksmith to open the lock.

3. First from the outside door of the toilet door, the central part of the block can be shortened also known as the lock shaft, lock shaft, lock groove contact, reduce conflict, after a sharp knife pierces the groove groove, lock the shaft, lock the shaft direction of the force, maybe one or two open, or try several times.

Note: Due to the action of external force, the door cannot be opened, it may be because the inside of the deadbolt is decoupled or the shape of the deadbolt is deformed, and the screws that hold the deadbolt fall off, which then causes the door to jam. In this case, the emergency treatment is to find the deadbolt and pull the fallen screws back from the inside of the door. This method is only suitable for cases where the door lock cannot be opened due to external materials.

A screwdriver, nail clippers, and a coin can open it, but for some more expensive doors, or doors with complex codes and locks, these methods will not open it.

The toilet door can still be opened after being locked because the anti-lock buckle is invalid and should be replaced in time.

The precautions for replacement installation are as follows:

1. Cut out the installation paper plan attached to the appropriate height of the door, and the core of the hole is about 1 meter from the ground.

2. Adjust the inclined plane of the oblique tongue according to the left and right door openings.

Place the lock body into the lock body hole with self-tapping screws towards the closed door.

Fasten. 3. Insert the lock body into the slot opened in advance, fix the lock body with screws, and insert the square core into the square hole of the lock body, then put the square hole of the front and rear panel handle into the square core, screw into the two fastening screws on the inner panel (not tightened for the time being), pass the lock cylinder through the lock core hole from the inside of the door to the outside of the door, tighten the lock cylinder and the lock body with the lock cylinder fixing screws, and then tighten the two fastening screws on the inner panel.

4. Chisel out the buckle box hole and the buckle plate support nest at the corresponding position of the door frame, install the buckle box and buckle plate, and fasten it with self-tapping screws, so that the deadbolt can be retracted freely.

Door locks provide a barrier for us to ensure the safety of our property and personal safety. Therefore, it is very necessary to have a door lock on every door. However, sometimes we know very little about door locks, which leads to problems that often arise and we don't know what to do.

For example, how do you open the toilet door when it is locked? Let me take you through this problem.

1. How to open the toilet door when it is locked.

If it is an anti-lock on the outside of the room. It's usually two more turns than it was. This kind of person in the room can't open the door even if they have a key.

It can only be opened from the outside by someone with a key. If the key can't be opened, you can only choose to break the door violently and go out, or ask a professional staff to come and pick the lock and open the door.

Second, the limb should be cautious about the method of maintaining the door lock.

1. There is no need to add oil to the lock cylinder. If it's not flexible, the easiest way is to put some pencil lead crumbs in it, and then open and close the lock several times to allow the pencil crumbs to fully contact the lock. Because dripping oil into the lock core, although it can solve the problem of astringency and tightness of the lock, it is easy to absorb dust, which is not easy to clean and form putty, causing secondary damage.

It will be more cumbersome to clean up and more prone to breakdowns.

2. When the door is closed every day. Make sure the deadbolt is screwed into the lock body and the door is closed before letting go. Don't push too hard, and don't bang on the door.

Otherwise, it will reduce the life of our locks. If the door lock is used for a long time, it becomes smoother. Try not to add regular lube to it.

It is recommended to use a professional lubricating oil. Then repeat the operation to open and close the door lock a few times, so that it should be able to solve it easily.

I concluded: The above is how to open the toilet door after it is locked. We can see that it is very important to have your keys with you.

When using, you should pay attention to handling gently, and rotate it in a moderate way, not overdoing it. Don't expect lubricants for everything, either. There are pros and cons to this, and it can solve the current problem but it is not good for long-term use.

We need to think about how to maximize the value of door locks in the long run.