May I tell you, the difference between a flute of tens of yuan and a flute of several hundred yuan?

One, low-grade flute.

Because the bamboo material is light and thin, the super treble 1 (tube tone 5) is easy to blow! But the sound in the mid-bass range is fluttering.

Second, the high-grade flute bamboo material is relatively thick and the pipe diameter is thick, so the mid-bass sound vibrates well, but the treble is relatively difficult to blow, under normal circumstances. The flute maker must at least ensure a high pitch of 6

5) is pronounced normally. The sound quality below treble 6 is generally not guaranteed, so it is not an effective sound area).

Three. There is no such thing as a perfect flute, and if you take it as a standard for a super treble 1 (5 tube) to be good at playing, then everything is very simple. The high-pitch flute in the low range.

It's generally good to blow, but only if you don't have any requirements for sound quality in the mid-bass range.

Fourth, fat people are very powerful, but not flexible; Skinny people are flexible, but they don't have enough strength! The car with thick steel plate must waste oil, and the fuel-efficient car steel plate is definitely not thick!

In general, the flute with good treble will be relatively inferior to the middle and low tones; The flute with good mid-bass vibration will be relatively inferior in treble. No one is perfect.

1.Material: The materials used to make the flute are bamboo, resin, jade, etc., and the flute of tens of yuan is generally made of cheaper bamboo, while the flute of several hundred yuan is made of more advanced bamboo, such as bitter bamboo, purple bamboo, etc.

2.Process: The production process of a flute of several hundred yuan is more refined, the surface is smoother, and the timbre is more pure.

3.Intonation: The intonation of a flute of several hundred yuan is easier to grasp, and the timbre is richer.

4.Brand: A few hundred yuan flutes generally come from more well-known brands, and the quality and reputation are more guaranteed.

To sum up, there is a big difference between a flute of tens of yuan and a flute of several hundred yuan in terms of material, craftsmanship, pitch and brand. If you want to buy a good quality flute, it is recommended to choose a flute of a few hundred yuan.

1.There are different pitches, such as the F-key flute, there are major F and minor F flutes, and the frequency of their tones is one octave apart.

2.The size of the big F flute is definitely larger than that of the small F, and generally these double bass flutes are 7 holes.

3.If it is not an octave difference, such as the C key flute and the G key Bang flute, the first difference is that the pitch is different, and the key is not used, and the second is that the timbre is also different, the timbre of the qu flute is crisp, and the bang flute is high-pitched.

4.The bass flute has a big G, a big A, a flat B, a big F, of course, there are also times D, times C, these flutes are generally thick and long, and the double C is a bent pipe, double flute membrane. So is the double d.

LZ can try to buy flutes online, here we recommend **Citafang, Chuangjun and Ditron, **range between 50 and 100 can buy low-end flutes, for beginners this grade of flutes is more than enough, if you continue to learn, you can generally use it for two or three years. Of course, it can be used for a longer period of time, but then it will not be able to meet the needs of the technology. Generally speaking, about 100 flutes on the Internet will be sold for three or four hundred in physical stores, so it is best to consider online shopping.

For beginners, it is recommended to discuss with the boss when buying a flute, and require a flute with a relatively high sensitivity [relatively thin aperture]. This flute is easy to learn, with a bright initial tone, and although the sense of heaviness is not very strong, it is very good for beginners.

If you buy a flute in a piano shop, it is recommended that the landlord first see if the flute is very straight [look at it vertically], and the curved flute is often a very poor flute. Secondly, looking at the texture and original color of the flute, generally speaking, the flute made of bamboo of 3-5 years old is a very good flute [although it is very expensive......This kind of flute is generally darker in color and earthy yellow [the paint of the brush is not counted], and it is heavier to carry on the hand. Finally, LZ can ask the shopkeeper if he can try blowing it and let the shopkeeper blow 16 full tones, and if he can blow it, he can consider starting it.

Also, the question about sensitivity is mentioned here. Generally speaking, the thinner the flute, the higher the sensitivity, but the sensitivity is inversely proportional to the sense of heaviness. Therefore, the flute with a relatively high sensitivity is only suitable for beginners to blow, but beginners often do not know the situation to choose a higher sense of heaviness and a stronger flute, although this kind of flute master blows very well, but it is difficult for novices to blow.

At this time, there will be a situation where some people say that the flute is difficult to play, not that the flute is not good, but that the kung fu is not at home.

At this point, I hope that LZ can buy a good flute that satisfies him. In addition, there is a basic tutorial of the flute in my network disk.,LZ can take a look if you're interested.。 If you have nothing to do, you can poke me, and I wish LZ a speedy success!

The mouth shape is mainly to control the airflow, and beginners must pay attention to the three factors of "damper", "mouth wind" and "mouth strength" when playing.

1. Damper: When playing the flute, the gap between the two lips through which the airflow passes is called the damper. When the damper is played again, it changes with the pitch of the flute. The lower range is slightly enlarged due to the slower airflow; The damper is slightly narrowed in the treble due to the rapid airflow.

2. Mouth wind: When playing the flute, the breath that comes out through the "wind gate" is called "mouth wind". When the high, middle and low pitches and intensity of the flute change, it is required to control the lightness, weight, slowness and urgency.

When blowing the treble and strong notes, the "mouth wind" is required to be tight and heavy; When playing the bass and weaker notes, the "mouth air" is required to be slow and light.

3. Mouth strength: When controlling the size change of the "damper" and the light, heavy, slow and urgent "mouth wind", the lip muscles, the corners of the mouth and the cheek muscles cooperate with each other, and the control ability of repeated retraction is called "mouth strength". In order to achieve the ideal level of blowing, beginners must work hard to control the "mouth wind" and "damper" practice to keep the pitch accurate and the timbre beautiful, so that their "mouth strength" can pass the test first.

In addition, Madi emphasized that the mouth must be open to the maximum state when blowing, as if blowing with something in his mouth, which is conducive to controlling the shape of the mouth and breath.

Based on your question, xxbb1154 deduces that there are four possible causes:

The flute film is too loose, and it is more difficult to blow the flute film too loosely, especially for beginners (you said to use transparent glue, this reason can be ruled out).

If you don't press your fingers tightly, there may be an air leak. You try to open your fingers all the way to see if it sounds, and if it does, it means that your fingers are the cause.

Mouth shape, mouth strength. A little bit of a small problem with the mouth shape will not blow can't blow, it may be a problem with your airflow angle, roughly keep about 40 ° from the level, the mouth wind should not be too scattered, concentrate the point, turn the flute while blowing, and the angle that can be blown is right.

The problem with the flute itself. This possibility is very small, or find the problem from yourself!

If it is appropriate, it will be adopted, and if you don't understand, send an email to duolaimi.

By the way, no matter how cheap the flute is, it is impossible to have the situation that you said that it can't blow 5, check whether the flute is damaged, whether it is deformed, etc.

Look at the light to see if there are cracks, where to buy it.

The film should not be made of transparent glue, but should be used with a special flute film (reed film or bamboo film, the bamboo film is brittle and the sound quality is not good). And see for yourself whether your flute has a crack or not, it is likely that the flute will burst! In addition, if you really like flutes, it is recommended that you buy flutes for more than 100 yuan, you get what you pay for!

The ten-yuan flute must have changed in terms of sound quality and timbre and tone for two years, so it is best not to blow it, which will affect your ability to distinguish the tone.

Ten yuan is also called a flute The membrane has a special flute membrane The transparent glue timbre is dumb and infectious.

Affected by external factors such as temperature, it should be good to practice the basic skills for 10-20min first.

If the flute is left for a long time, see if the flute is cracked, if not. It may be that the fingers are leaking, the breath is unstable, and the blowing hole is not in the right position.

Obviously, the flute is so bad, I can only barely play the flute of 20 yuan ten years ago, and it is a miracle that the flute of 10 yuan in the past two years can be good.

And you are using adhesive tape, which will not blow out, it will only cause the pitch to decrease + the treble cannot be blown out.

Buy one, you really can't play a ten-dollar flute.