Yabai processing method, the simplest grinding tool of Yabai

It is recommended that you clean the epidermis, the grinding of the aging material is a process that requires patience and meticulousness, the first step: soak the cypress in water for more than two hours;

Step 2: Polishing with Dupont silk flower heads, be sure to polish along the texture as much as possible; Step 3: Use a sandpaper wheel to sand, be sure to follow the texture as much as possible; Step 4: Polishing with a wool wheel.

The general process is: first of all, use a softer wire brush to grind off the gray-black or gray-white weathering layer on the surface of the cypress, the wire wheel is too hard to damage the delicate and rich texture of the cypress, of course, this also requires more practice in the polishing technique. A modified scraper is then used to remove the regolith that has not been brushed off and the untreated clean places and deep trench corners on its surface.

Then use sandpaper to remove the small burrs and the damage of the cypress to smooth the repair, and then use the Dupont silk flower head (special grinding head for wood polishing) to polish in order according to the number of meshes. Finally, use a cloth wheel or a brown wool wheel to polish the fine polish. This method is suitable for sanding uneven surfaces with rich textures and variability.

The use of sandblasting and high-pressure water guns is best used on the large-scale japin root art, which can quickly achieve the purpose of quantification, but it is not convenient for general enthusiasts to use it because of the site and power and other problems.

The simplest grinding tools of Yabai are hook knife, hanging grinder, sandpaper rod, and hand drill.

Hook knife, used to remove the surface of the rotten skin, after the Ya cypress is soaked in water, the first step is to use the hook knife, remove the rotten skin to expose the tiger skin texture, is one of the necessary tools to retain the tiger skin texture! When removing the outer skin, the strength should be moderate, not too large, not too small, the force will cause the texture to break off and destroy the beauty, the strength is small, the skin is not clean, and it also affects the appearance.

Hanging grinder, used for fine grinding and polishing of fine parts, hook knife to remove rot after the grinding machine is used, with a sanding wheel to start grinding the surface of the cypress, polishing and polishing at a glance. Make the surface of the cypress more shiny and moist. The grinding machine is equipped with a handle, which is very comfortable to hold and will not feel uncomfortable for long grinding sessions.

Sandpaper rod, fixed sandpaper, make sandpaper wheels and other purposes, can be used on hanging grinders and hand drills, you can make sandpaper wheels by yourself, from 240-7000 meshes can be made. First of all, a screwdriver, according to the screws on the sandpaper rod, build the sandpaper into a suitable size square, and then punch a hole in the sandpaper, install it on the sandpaper rod to try.

Hand drill, polishing large ornaments, coring and punching and other purposes, hand drill power is relatively large, the speed is fast, you must pay attention to safety when using. It is best to hold it with two hands, and it can also be used with a vice specially designed to hold a hand drill. The grip of one hand is not very good, and the hands will be very sore when used for a long time.

Summary. Dear, your question has been seen, I come to your question, it takes time to type the content, please be patient, I will give you a timely reply. Please do not ask other questions that are not related to the above questions, so as to avoid the possibility that the respondent does not have the relevant knowledge and information.

Of course, if you know, you will be able to answer as soon as possible, if you don't know, don't be surprised, thank you for your understanding and support.

What are the best ways to take root?

Dear, your question has been seen, I come to your question, it takes time to type the content, please be patient, I will give you a timely reply. Please do not ask other questions that are not related to the above questions, so as to avoid the possibility that the respondent does not have the relevant knowledge and information. Of course, if you know, you will be able to answer as soon as possible, if you don't know, don't be surprised, thank you for your understanding and support.

The best way for the cypress to take root is to provide it with the right temperature and humidity. The soil should be well nutrient, and watered in moderation, wet and dry. In addition, you can use rooting powder mixed with water to water the roots. This allows for faster and more rooting.

If it is a transplanted plant, keep the soil moist and it is best to water the plant with warm water in winter. If it is a cuttings plant, you can consider that the store that sells horticultural plants to buy "rooting powder" can promote the growth of roots, in view of the characteristics of your plant, the cypress is an arbor, and can not be propagated by cuttings, if there are no roots, it probably can't live.