Do small cracks in quartz countertops need to be treated

The surface treatment did not have much effect, and the support was deformed.

Yes. The cracks on the quartz countertop are inseparable from its material, countertop installation technology and user habits. Based on the location of the crack, we can speculate on what is the problem.

According to common sense, cracks in quartz countertops must be directly called to the after-sales delivery factory of the kitchen cabinet brand for professional treatment. Quartz stone and artificial stone.

Different, it can't be repaired on site, because of its high hardness, it can't be repaired like artificial stone, and it is difficult to grind it flat, and it can't be done without a professional machine.

When users encounter cracks in quartz countertops, although they cannot repair them by themselves, they can do some simple emergency treatment to cope with the use needs before the after-sales service arrives.

Situation 1: The cracking is not severe.

The user can observe whether the location of the crack is severe, and can apply a layer of water to the crack. Look at the speed of water seepage, if the rate of water seepage is very slow, it proves that the cracking is not serious. The user can try to scrape a little bit of the crack with a blade and fill the inside with a joint.

Quartz glue, about half an hour until the glue is dry, scrape off the surface glue layer with a blade, and use it overnight.

Situation 2: Severe cracking.

If the cracking is severe, the crack may go up to 50-60 mm. The only thing the user can do is to prevent the panels of the cabinet.

Water seeps through cracks in the countertop, and the user can use glass glue.

Apply a layer to the surface of the crack, seal it temporarily, and notify the after-sales party of the kitchen cabinet as soon as possible.

Tips: In daily cooking, many operations are completed on the countertop, and once there is a crack on the countertop, the correct emergency treatment needs to be carried out, and the most important professional treatment should be contacted in time to contact the brand after-sales party.

In addition to the reason that the edge of the sink and stove hole is not treated and smooth, the cracks around the sink and stove are not left enough clearance for the sink, stove and countertop when installed. After choosing a good brand and thick quartz stone, installation is also very important. Install quartz countertops to ensure that the cabinets and base cabinets are kept level.

If a quartz countertop falls on an uneven base cabinet, the chance of cracking increases.

Cracking in the center of the countertop, etc.: high temperature, impact by external force, uneven cabinet or backing board, internal injury to the board, etc.; Therefore, the main factor causing the cracking of the countertop is caused by the lax quality control of the countertop during the processing process. Generally speaking, if the cracking is caused by the plate itself or the processing and transportation problems of the store, you can apply for after-sales service and replace the new countertop within one year.

Quartz stone is resistant to high temperature, but the phenomenon of thermal expansion and cold contraction is there, so pay attention to leave a certain gap when opening the sink and stove, and the opening size is slightly larger than the outer wall of the sink. The corners should be rounded about 25mm. The opening is at least 8 cm wide, and it is easy to crack if it is too narrow.

In the process of daily use, do not knock on the countertop with gravity, do not put the container with high temperature directly on the countertop, you can lay a layer of heat insulation board; Avoid scratching the surface of the countertop with sharp objects, etc. Choose a regular manufacturer of quartz stone, but also consider an installation, if you need to do kitchen countertops need to open holes, it is best not to choose on-site openings, now the use of hand-held cutting machines is easy to cause collapse or small cracks, a short time can not be opened.

When the countertop is installed, there should be a 2-4mm expansion gap between the countertop and the wall, so as to effectively ensure that the countertop does not crack due to thermal expansion and cold contraction. The maximum distance between the table top and the support frame or support plate should not exceed 600 mm to reduce the deformation or even fracture of the table top; Quartz stone with high hardness, high density, scratch resistance, wear resistance does not penetrate the advantages of the market to occupy the market, although the quality of the plate on the market is uneven, but from the cost performance of quartz countertop is still good.

It is because the quality of the quartz countertop is very bad, and its heat resistance is very small, so when it is subjected to high temperatures, the quartz countertop will crack immediately. When putting things on the countertop, be sure to put some thermal insulation pads first.

Because the inside of the house is too dry, these stones are cracked again, which shows that its quality is not good, and maintaining the humidity in the house can prevent it from cracking.

The biggest possibility is that the thermal expansion and contraction will cause cracks, and the best thing to do is not to put the hot pot on the table.

Because quartz stone is a brittle polymer composite material, it also has the characteristics of thermal expansion and cold contraction, and also has certain mechanical properties such as shrinkage stress, impact toughness, and elongation at break. Winter is the high season for quartz stone cracking, and excessive temperature difference is the most common cause of quartz stone cracking. If it's just a crack, there's a kind of marble gum that can be used to repair it.

Hello, if there is a small crack, you need to solve it according to the direction of the crack, including the specific cause. If the crack is not particularly severe, sprinkle water in the crack first and see how fast the water seeps. If Bib is not slower, it is not particularly serious.

And if the water seepage is relatively fast, it means that the internal cracks may be relatively large. If the problem is not particularly serious, you can do a simple treatment, by talking about quartz glue, marble glue can effectively fill the cracks of the type. After the glue dries for about half an hour, the glue layer on the surface is scraped off and can be used again.

Quartz countertop cracks, first clean the cracks, and then use 10 parts of glue and 1 part of curing agent for local judgment blending, punch glue needs to be based on the color of their own quartz countertop. After blending, start to apply glue, when applying glue, you can first use masking tape to paste it on the cracks, so that it will be easier to polish after coating. Finally, after the glue is dry, tear off the masking tape, and then polish the countertop glue with sandpaper.

Quartz stone, usually what we call quartz stone, is a new type of stone synthesized by more than 90% quartz crystals plus resin and other trace elements. It is a large-scale plate pressed by a special machine under certain physical and chemical conditions, and its main material is quartz. Quartz is a mineral that can be easily turned into a liquid when exposed to heat or pressure.

It is also a fairly common rock-forming mineral, found in all three major types of rocks.

Repairing cracks in quartz countertops requires some professional methods and materials. Here's a common patching method:

1.Preparation:

Cleaning: Use a mild detergent and a soft cloth to clean the crack and surrounding area to ensure the surface is clean and dust-free.

Drying: Wait for the countertop to dry completely, making sure there is no moisture left on the surface.

2.Fill the cracks:

Filler selection: Choose a caulk that is specifically designed to repair quartz. You can consult with a quartz stone dealer or buy a professional caulk.

Fill the crack: Squeeze the caulk evenly into the crack and use a scraper or grading tool to level it out, making sure the caulk fills the entire crack.

Trowel: Use a scraper or leveling tool next to the ridge to flush the surface of the caulk with the surrounding quartz surface.

3.Clean up excess caulk:

Quick Cleanup: Use a damp cloth or sponge to quickly wipe down the caulk surface to remove excess caulk. Be careful not to push too hard so as not to squeeze the caulk out of the crack.

Clean up carefully: Wait for the caulk to partially dry and use a plastic scraper or spatula to gently scrape off any excess caulk from the surface of the Sakura lead oak. Be careful not to damage the surface of the quartz.

4.Wait for drying and polishing:

Polishing: Use fine sandpaper or a polishing cloth to gently polish the surface of the caulk so that it is smooth and consistent with the surrounding quartz surface.

Please note that this is only a common repair method, and the specific steps and materials may vary depending on the specific situation of the quartz countertops and the recommendations of the vendor. Exciting <>