How to deal with kitchen quartz countertop staining?

Here's how to clean it up:1. For the general stains remaining on the countertop, you can use any neutral detergent (such as dish soap, hand sanitizer) to clean it, and then wash it with water. In particular, oil stains and stains should be cleaned up in time.

2. For hard dirt stuck to the countertop, such as glue, nail polish, paint, etc., you can scrape off with a razor.

3. In order to keep the quartz countertop as new for a long time, if there are oil stains, soy sauce stains, rust and other stains on the countertop, clean it up at the very long time to avoid remaining stains on the countertop for a long time.

4. Do not put dirty wipes in the same place on the countertop for a long time to avoid bleeding on the countertop.

1.You can wipe it off with a hot cloth dampened with dish soap.

2.With soap and a little ammonia mixed with turpentine, you can remove a lot of gum cherry blossoms from the glass.

3.Repeatedly stick and tear with a transparent adhesive with good viscosity to remove some of the surface.

4.Rub with a little dilute sodium water.

5.Soak it in detergent and try to dispose of it.

6.Use a soft-bristled brush, but never use an iron brush. Quartz countertops refer to cabinet countertops made of quartz stone, mostly made of broken glass and quartz sand.

The advantages of quartz countertops are that they are wear-resistant, not afraid of scratches, good heat resistance, can be paved on the wall in a large area, and the splicing is seamless and durable. Life is so simple, use the Dianbao order app, and solve the problem of life service anytime and anywhere.

Quartz countertops have stains cleaned up: use toothpaste, baking soda + white vinegar, and you can buy professional wax for polishing.

1. Use toothpaste. Apply it to the rust and wait for a while, about 10 minutes, before wiping it with a damp cloth.

2. Baking soda + white vinegar. Wipe the countertop with baking soda and white vinegar, it can effectively dissolve the oil, and finally wipe it again with water.

3. You can buy professional wax for polishing, dip the wax with a rag, rub back and forth, and also remove stains, and at the same time add a protective film.

What should I pay attention to when using quartz?

1. Avoid placing high-temperature objects directly on the countertop

When in use, do not put the utensils taken off the stove, oven, and microwave oven directly on the countertop, so as to avoid the local temperature of the countertop being too high and cracking. Instead, start by placing a heat insulation pad or rubber pot stand on the countertop.

2. Do not cut vegetables directly on the countertop

Do not cut directly on the countertop, but use a cutting board to avoid scratches or blunt cuts. If you accidentally leave a knife mark on the countertop, you can use 180-400 mesh sandpaper to gently wipe the surface according to the depth of the knife mark, and then treat it with a scouring pad.

3. The surface of the countertop should be kept dry as much as possible

Tap water contains a lot of bleach and limescale, and if the water stains on the countertop stay for too long, the color of the countertop will be lightened and the appearance will be affected.

The solution to the color infiltration of the quartz countertop: remove it with a detergent for washing dishes, polish it with fine sandpaper, ask a professional, etc.

1. Remove with dishwashing detergent

If the quartz countertop has just absorbed color and the area is not particularly large, we can first moisten it with a rag dipped in water, and then let its dry color soak for a period of time, and remove it with a detergent used for dishwashing. Because generally some grease or soy sauce stains, this can be removed without leaving traces.

2. Polishing with fine sandpaper

If it has penetrated into the interior and sometimes just wiping the surface does not work, we can prepare a fine sandpaper and then sand it on top of the stain, which will also be able to remove the color. The sandpaper should not be too coarse, but should be fine, similar to the sandpaper used for car painting, so as not to damage the countertop.

3. Hire professionals

If the staining has been for a long time, and it is more serious and the area is relatively large, you can ask a professional to polish it, and you need to grind off all the layers on it, and after polishing and waxing, you can completely remove the stains on it.

Quartz countertops can be used with neutral dish soap to infiltrate the color.

Or wash it with soapy water and wipe it back and forth with a rag, not with a wire ball, because it is likely to leave water stains on the board.

Surface. <>

Quartz countertop maintenance

1. Quartz countertop waxing.

In addition to cleaning, quartz countertops must also be waxed, especially if there are stains in the joints of the countertop, it is recommended to scrub them as soon as possible, and wax them here.

2. The table top is protected from high temperature.

It is not possible to put a hot object directly on the surface of the quartz stone, even if the quartz stone can withstand high temperatures, it may still bring damage to its surface. Also, don't cut vegetables directly on the countertop or hit the countertop too hard.

1. If the quartz countertop is dyed, you can use neutral dish soap or soapy water to clean it, and use a rag to wipe it back and forth.

2. Quartz stone, usually we say quartz stone is a new type of stone synthesized by more than 90% quartz crystals plus resin and other trace elements. It is a large-scale plate pressed by a special machine under certain physical and chemical conditions, and its main material is quartz. Quartz is a mineral that easily turns into a liquid when exposed to heat or pressure.

It is also a fairly common rock-forming mineral, found in all three major types of rocks. Because it crystallizes the latest in igneous rocks, it usually lacks a complete crystal plane and is mostly filled in the middle of other rock-forming minerals that crystallized first.

1. Use 300 mesh water grinding disc to polish the uneven place of the quartz table to ensure that it is smooth after polishing. 2. Next, use 500 mesh water grinding disc to brighten the quartz countertop, and it is very important to be satisfied with the actual gloss when the operation is brightened.

Quartz countertop polishing and refurbishment is a very important operation, and in the process of specific operation, the position of the water grinding disc can not be ignored. The quartz countertop with uneven problems needs to be polished with 300 mesh terrazzo, so that the visual effect after polishing is better.

2. After the problem of leveling is solved, the gloss of the quartz countertop is also very important. In the process of processing, it is important to choose a 500 mesh water grinding disc to enhance the quartz countertop. In the process of brightening, it is important to grasp the right gloss.

3. Whether it is specific polishing or brightening operation, it should be noted that it is very important not to use too much force and master the strength. Only after mastering the strength, the wear area of the quartz countertop can be effectively controlled, and if the wear area is too large, it will also affect the service life.

Wipe it with toothpaste first, and then use No. 0 water sandpaper to dip the non-fading area in soapy water and gently rub it.

1. Please ask professional stone mirror treatment personnel to come to deal with it. The principle is to grind off a layer of marble directly and then polish it. The advantage is that there is almost no color difference with the original after processing, after all, it is still the original stone. The disadvantage is that the price is high and low, and the polishing process is dusty;

2. Use some marble cleaner. The advantage is that it saves money, and the disadvantage is that it is generally not clean.