Iron wire handicraft production process, handicrafts made of iron wire

Iron wire can be used to make tree ornaments, and the specific method is as follows:

Prepare materials: wire, clay.

1. Twist the wire into one piece, as shown in the figure below.

2. Cut off the tail of the wire, as shown in the figure below.

3. Screw the two wires at the tail together, as shown in the figure below.

4. Twist the upper part of the branch of the wire tree together.

5. Use pliers to adjust the wire.

6. Glue the clay to the wire, as shown in the figure below.

7. As shown in the figure below, the wire tree is ready.

Iron can be madekeychain, or made smallBall,When making a small ball, the wire should be cut into several sections, and then each section is bent into a circle, and finally the circle is interlocked into a small ball wire twisted into a strand to make a trunk, and then split into a sincere branch, and then hang copper coins on the branch, and it is successful.

Iron wire canMake clips, staples, hooks, connecting wires, corkscrews, doorknobs, paper clips, mosquito coil holders, nets for fishing netsMouth.

Iron wire is a kind of metal wire made of iron drawing, iron wire according to different uses, the composition is also different, it contains the following components: iron, cobalt, nickel, copper, carbon, zinc, and other elements. The wire is divided into many models according to the coarse subdivision.

Can be used:Bundle items, making clotheslines, etc., the commonly used wire models in life are No. 22 and No. 24. Generally, it is used in No. 14-30 or No. 16-36. The larger the number, the thinner the wire, and a thicker one can be used when making a clothesline, and you can choose a No. 8 wire.

Iron wire to make handicrafts

1. Pieces of paper, scissors, rubber bands, needle-nose pliers, tape, paintbrushes, fine wires, markers, etc.

2. Cut two wires, one 4 inches (10cm) and the other inch (14cm).

3. Wrap a small circle in the middle of the longer wire with a paintbrush.

4. Place the circle in the middle of the fingers, and fold the wires on both sides down to be perpendicular to the circle.

5. Fold the tail of the wire into the shape of a hook and use it to hook the rubber band.

6. Wrap the center of the short wire around the brush shaft.

7. Thread the rubber band into the loop of the short wire.

8. Then pass the rubber band and the ring through the loop of the long wire, and finally hook the rubber band with the hook at the end of the long wire.

9. Cut out four butterfly-shaped wings out of cardboard.

10. Draw the butterfly pattern you want on the cardboard.

11. Tape the wings to the wire. The butterfly is done.

Using simple materials such as iron wire and pieces of paper, you can make beautiful paper butterflies.

The iron wire usually used is only used to fix small things, or as a variety of small uses in life, and it is rare to see iron wire can play a decorative and ornamental role in home life. If you left some thin iron wire or copper wire when you were doing beads or small celery in your home, it is better to take it out and make good use of it! Pinch a few patterns or shapes, it's full of surprises!

Flower arrangements at home, decorative wall hangings, and even baskets, cups and ...... with storage functionscan easily DIY.

Creative wire DIY

You can print a pattern drawing that you like to accompany quietly, use different diameters of thick and thin wires, measure the size on the pattern, cut it, tighten each wire and then combine it. If you want to be a little more delicate, you can use beads of different colors to string and then shape, which will not take too much time to make it easy for you to complete.

The wire can be done by hand as follows:

Materials: red, white and black woolen reedstone, and two additional paper balls.

1. Wrap a large and a small paper ball with iron wire, which is the skeleton of the egret.

2. Then start winding with wool.

3. The body and head of the egret are made of white wool.

4. The legs and beak of the egret are made of red wool.

5. The wings are made of black wool, and finally the movable eyeballs are glued, and a standing egret doll appears in front of us.

The production process of barbed wire is divided into: braided type, spot welded type, cut-off type, stamping type, wrapping type, screwing type, anchoring type, etc., collectively referred to as barbed wire or steel wire mesh.

The barbed wire mesh has further developed and expanded, and there are many types such as: fence mesh, stove protective mesh, embossed mesh, woven mesh, hook mesh, Dutch mesh, welded wire mesh, steel welded mesh, wire welded mesh, wire embossed mesh, wire fence mesh; mesh and so on.

Related products of barbed wire: barbed wire for flood control and flood control: gabion net, gebin net, plastering wall net, lead wire cage, honeycomb lattice hidden vertical net, ecological grid, ecological cage, pavement reinforcement net, port engineering net, retaining wall, green grid, heavy hexagonal net.

Barbed wire for traffic safety protection: highway fence, highway fence, airport fence, railway fence, bridge fence, factory fence, stadium fence, workshop warehouse fence, construction site fence, community fence. Barbed wire for breeding and planting:

Dutch nets, hook nets, diamond nets.

Coal Mine Barbed Wire: Underground Metal Mesh, Coal Mine Graticule, Coal Mine Mesh, Coal Mine Safety Net, Coal Mine Support Net, Coal Mine Safety Support Net, Mine Mesh, Mine Barbed Wire, Coal Mine Barbed Wire, Coal Mine Woven Barbed Wire, Coal Mine Flat Woven Mesh.