How does Xiaomi Mi 5 get stuck in third party ROMs?

<>2. Open "System Update" and click on the upper right corner.

<>3, then select "Reboot to Recovery Mode".

4. Select "Backup" and customize the data you need.

5. Select Clear Data, in order to ensure the smooth flashing, in addition to sdcared (memory card), cache and data partitions, system (system) these can be cleared.

<>7. After the installation is complete, select "Restart".

Preparations before flashing recovery on Xiaomi Mi 5:

1: Make sure your phone has been unlocked, you need to unlock BL before you can flash recovery

Two: Xiaomi Mi 5 starts to flash the operation of recovery:

1: When the mobile phone is turned on normally, connect the data cable between the mobile phone and the computer, check whether the mobile phone is connected to the computer with a data cable, and ensure that the mobile phone can be connected to the computer normally.

Then flash the following commands in turn, you can directly copy and paste the way to operate, remember to press the enter key after the paste is completed:

adb reboot bootloader

fastboot flash recovery recovery_

fastboot boot recovery_

3: There will be a prompt after recovery is completed.

Tips: After flashing in to read data or sdcard, you need to format the data partition first, and then restart it once to enter recovery, remember to back up the data before formatting the data.

Ways to manually enter recovery by yourself:

Turn off the phone first, and then press and hold the phone's "volume up button" + power button in the state of shutdown, and the phone can enter the recovery interface after a while:

If the above rendering is displayed, it means that the recovery has been successfully flashed.

Flashing Tutorial] introduces two methods (the number of card swiping packets is generally large, there are more options, and it is easier to operate than line swiping packets).

1) One-click flashing.

Use flashing software to flash the machine with one click, such as Qitu flashing, it is very simple, and you don't need to do it yourself for double clear backup.

2) Card swiping. Brush in according to the regular card swiping process, pay attention to brush the third-party REC, double clear before flashing into the package, keep the battery power above 50%, and available memory!

The swiping steps are as follows:

Step 1: Import third-party recovery (if you want to flash third-party ROM, third-party recovery is indispensable; If you have already flashed the third-party recovery before, you don't need to flash it again).

Step 2: Swipe the third-party ROM package (card swiping).

2.Enter Recovery mode.

In the shutdown state, press and hold the volume up + power on button, and hold down the two buttons until you enter recovery;

In the boot state, select "Restart", press and hold the volume button to enter recovery mode;

3.Wipe Data Factory Reset (Wipe out all data) (the volume button controls up and down, and the power button is OK, the same below).

4. yes

5.Wipe cache partition

6. yes

7.Install Zip from SDCARD

8.Choose Zip from SDCARD

9.Find the installation package and open it.

10 Finally, choose to restart the phone, congratulations on the successful flashing! (It takes a long time to start the first time after flashing, please be patient).

Log in to the official website of MIUI on your computer, unlock it, and swipe it casually.

1. Turn on the computer and enter the official website of Xiaomi.

2. After entering the official website, click on the MIUI on the left border surface to enter.

After the official website application is successfully unlocked, the third-party RE can be swiped before the third-party ROM can be swiped.

Xiaomi Mi 5 official card swipe.

1. Preparation.

Make sure that the power is sufficient, at least 50% or more.

2Connect your phone to your computer and copy the zip package to the Downloaded ROM folder (this must be the folder) for the internal storage

3. Find [System Update] and click to enter.

<>5After selecting the correct complete package, the system will automatically start the upgrade, and after completion, reboot into the new system. Xiaomi Mi 5 card brush upgrade complete!

Note: It is recommended to upgrade the system once after Shuangqing to make it more stable.

Hello !

According to your description, the mi5 is going to flash the official rom

It is recommended to back up your phone's data, and after it is fully charged, follow these steps:

2 Press and hold the [Power Button] and [Volume-] buttons in the OFF state for 10 seconds.

3 Enter fastboot mode.

4 Connect to your PC and use the Mi-Flash Tool to flash your computer.

5 The flashing is complete and the system restarts.