My oppor9 doesn t flash anymore

The phone does not flash charge, which may be related to the following reasons:

1. When the battery temperature is lower than 15 degrees or higher than 43 degrees, it cannot be flashed, because the battery is sensitive to temperature, and it is not suitable for high-current charging at low or high temperatures.

2. In order to ensure the battery life, when the battery level is higher than 85%, it will automatically switch to the normal charging mode, and it is normal to stop flash charging at this time;

3. You must use the VOOC flash charging adapter and VOOC flash charging data cable that OPPO comes standard with at the same time, otherwise you will not be able to enter the flash charge;

4. When the flash charging data cable is not in good contact with the adapter or mobile phone, it will not enter the flash charge.

If you encounter the inability to enter the flash charge caused by the above situations, it is recommended that you:

1. Unplug the adapter from the power socket for at least one minute and let the adapter discharge completely;

2. Press and hold the power button of the mobile phone for at least 10s to restart the mobile phone or unplug the battery and then buckle the battery to turn it on;

3. Check that the data cable is in good contact with the mobile phone and the adapter;

4. Recharge to see if you can restart flash charging, if you still can't flash charge after completing the above operations, please go to the customer service center for testing.

Hello, mobile phones that support flash charging need to use the VOOC flash charger that OPPO comes standard with, (15 --43) before you can use flash charging. If you cannot flash charge with the standard VOOC flash charger, it is recommended that you unplug the adapter from the power outlet for at least one minute and let the adapter discharge completely; Or turn off and restart the phone; Check that the cable is in good contact with the phone and adapter. Recharge to see if you can restart flash charging.

If it doesn't work, you can only get the OPPO mobile phone after-sales for repair.

oppor9 does not flash charge, this is caused by the wrong setting of the flash charging function of the oppo mobile phone system, and the problem can be solved by resetting the flash charging function:

1. Take oppor9 mobile phone as an example, find the "Settings" option on the standby interface of the mobile phone, and click to enter the next step.

<>4. Click the turn on button of the dual-engine flash charge to open it to complete the flash charge setting of the OPPO mobile phone.

There was a problem with the phone system.

1.Press and hold the power button for 10 seconds to force restart the phone.

2.You can try charging for 20 minutes, then press and hold the power button for 10 seconds to see if it can turn on (the phone is completely out of power and recharged without any prompt).

3.When the phone is turned off, press and hold the volume up button and the power button at the same time for 3 to 4 seconds, after the vivo phone logo appears on the phone, release the button to enter recovery mode, first select wipe data factory reset, select wipe cache partition after completing the waiting interface, and select reboot system now to restart the phone immediately after completion.

If the above methods still can't be turned on or the mobile phone has important data, it is recommended that you take the mobile phone to the local after-sales inspection and processing, and the after-sales technician will handle it for you.

OPPO R9 has a built-in 2750mAh capacity battery and supports VOOC flash charging, of course, this is not a super VOOC "black technology" that is fully charged to 2500mAh in 15 minutes. Even so, the OPPO R9 still shows a very good charging efficiency, in the case of using the original charger and data cable (only at this time, the R9 will enable vooc flash charging, the charger and the data cable lack either of the two, and they can only be charged in normal mode), R9The power can be increased by more than 20% in 10 minutes of charging, and it will always maintain high-speed charging until 75% of the power, and then the speed will gradually slip.

How to deal with the vivo phone that can't flash charge:

1. The mobile phone does not display flash charging: Solution: 1. Go to [Settings] - [Battery More Settings] to confirm whether [Dual-Engine Flash Charging] is enabled; 2. If you use other lock screen styles, resulting in the screen not displaying dual-engine flash charging when charging, it is recommended to change the lock screen style that comes with the phone; 3. Confirm whether to use the original charger and data cable; 4. Disconnect the power supply, restart the phone and leave it for a while, and then try to charge it; 5. In addition, the connectivity of the socket may also affect the charging, it is recommended to replace it with other sockets for charging.

2. The mobile phone is displayed in flash charging but has no flash charging effect: Handling methods: 1. Try not to use the mobile phone when charging; 2. Use the "one-click acceleration" function to clean up the software running in the background; 3. Try not to recharge your phone after it runs out of power.

If the above methods still can't solve the problem of not being able to flash charge, it is recommended to contact vivo after-sales service.