What s wrong with my Xiaomi 2s vibrating for no reason while charging?

When the Xiaomi Mi 2S is charging, there is vibration, and the user first looks at the volume to see if it is set to mute or vibration mode by mistake.

Look at the status bar to see if there are push messages for certain apps.

If you rule out the above, it is possible that the system is faulty.

Under. In the power-off state, press and hold the volume up + power button at the same time to power on, the screen lights up, release the power button, and keep pressing and holding the volume button to enter recovery mode.

Select Chinese Simplified and confirm, volume key select Power key confirm, select Will install to system and confirm.

Select Confirm, wait for completion, and select Restart to system to enter the new system.

If the user still can't troubleshoot the fault after flashing the phone, he can only suggest that the user send the mobile phone to the brand's customer service for testing and repair.

Hi! Please try it out according to the following two points:

1.Please back up your data first (by turning on System and Security Backup to create a new backup. Then, enter recovery (power off, press and hold the volume on + power button to enter recovery) mode, clear cache, clear user data, clear all data, restore backup, settings and third-party security software in the phone do not recover.

Try if it works properly.

b.During this time, please back up your data, enter recovery (power off, press and hold the volume up + power button to enter recovery) to clear the cache, clear user data, clear all data,. The computer is equipped with a driver,** Miflash flash tool,This is the link to install the driver:

Mi-1 1S series.

Mi-2 series.

c.When everything is ready, please follow the flashing tutorial on the official website to use the sixth line brush, which is the official flashing tutorial:

If the phone stops charging to a certain extent, it means that the battery is broken.

If the mobile phone starts charging, the charging has a response and a charging logo, but it is less and less when it is not powered on. It represents the problem of mobile phone tail plugging.

The Xiaomi phone keeps vibrating after plugging in the charger, the main reasons and solutions are as follows:

a. If there is a problem with the mobile phone system, you can try to turn off the mobile phone and charge it when it is turned off. You can also restart your phone for testing; If necessary, you can restore the phone system to factory settings or upgrade to the latest version to solve the problem.

b. This situation occurs due to problems with the hardware of the mobile phone, such as a short circuit during charging due to a tail plug failure, so the mobile phone will vibrate directly; Or motherboard chip failure or battery failure can also cause this problem. Jianhong Rolling Auction proposed to contact Xiaomi's official after-sales service to overhaul the mobile phone, and it can be solved.

The tail plug is the place to charge and plug in the data cable, generally this is broken to the repair shop he only gives you a plug, or only weld it, not reliable, if you have the ability to buy a tail plug of your mobile phone model in **, generally twenty yuan, this is including the tail plug cable, just install it yourself.

Summary. Hello dear, Xiaomi 10s can only vibrate after being charged for a long time: 1. You can change the original factory without using the original charger to connect to the home power supply for charging.

2. Replace the power socket and try to connect a data cable to the charger for charging. 3. If you can't charge it with a wire charger, if conditions permit, replace the battery or try to use a universal charger. 4. If the phone can be turned on normally, it is recommended to back up the data in the phone and restore the phone to factory settings.

5. If the problem still exists according to the above methods, bring the purchase invoice, repair card and machine to the service center for inspection. The Xiaomi 10s is a mobile phone released by the Xiaomi company on March 10, 2021. The Xiaomi Mi 10s has a length of millimeters, a width of millimeters, a thickness of millimeters, and a weight of 208 grams; There are three options: black, blue, and white; With an inch AMOLED hyperboloid 90Hz screen with a rectangular lens that is round, the appearance is close to that of the Xiaomi Mi 10 Ultra, retaining symmetrical dual speakers and Harman Kardon.

The Xiaomi Mi 10S is equipped with LPDDR5 memory and UFS flash memory, a 4780mAh battery, and supports 30W wireless flash charging.

Hello dear, Xiaomi 10s can only vibrate after being charged for a long time: 1. You can change the original factory without using the original charger to connect to the home power supply for charging. 2. Replace the power socket and try to connect a data cable to the charger for charging.

3. If you can't charge it with a wire charger, if conditions permit, replace the battery or try to use a universal charger. 4. If the phone can be turned on normally, it is recommended to back up the data in the phone and restore the phone to factory settings. 5. If the problem still exists according to the above methods, bring the purchase invoice, repair card and machine to the service center for inspection.

The Xiaomi 10s is a mobile phone released by the Xiaomi company on March 10, 2021. The Xiaomi 10s Long Fuxiao is millimeters for the first time, with a width of millimeters, a thickness of millimeters, and a weight of 208 grams; There are three options: black, blue, and white; Inch AMOLED hyperboloid 90Hz screen lacks a number of screens, the rectangular lens is a rising finger round, the appearance is close to the Xiaomi Mi 10 Ultra Commemorative Edition, and the symmetrical dual speakers and Harman Kardon are retained. The Xiaomi Mi 10S is equipped with LPDDR5 memory and UFS flash memory, a 4780mAh battery, and supports 30W wireless flash charging.

So long and then copied over?

This is a battery issue.

I'm sending you the one above for you to check it out.

After charging, it can only vibrate because there is a problem with the battery, and you can go to the maintenance point to detect and replace it.

Do you think the battery is dormant or broken.

There is a high probability that it will break.

Poor contact.

It is recommended to reseat or replace the data cable.

Charging is automatically interrupted when the battery overheats.

Hi Mi Home is open Tuesday to Sunday, 10 am to 6 pm.

The after-sales service of Xiaomi mobile phones is: return within seven days, replacement within fifteen days, and within a one-year warranty repair period, non-man-made damage is completely free.

b.If you don't have outlets near the base bend, please go to Xiaomi's official website.

Log in to the place where you purchased this product, select Apply for after-sales service in the order details, and then please keep it unblocked. A member of staff will contact you with fluid sulptany. Or you can also call Xiaomi customer service directly 4001005678 consult.

We hope you find the above reply helpful.

This is because the charging voltage is unstable and causes the kitoku.

1.Open the dialpad and type* * Click to dial, and you will enter the hardware test and find the screen touch test item.

2.Click the button on the left side of the home button (that is, the small house) at the bottom of the phone (the icon is a key with a few horizontal bars), click the screen calibration, and after the success of the punch hole Tanti trembling, it will no longer jump around.

3.If it prompts that the calibration fails, just click a few more calibrations During the screen calibration, don't be impatient to click on the screen, otherwise it will fail, and then operate the phone after the prompt is successful or failed.

What exactly does the front cover bend mean by jumping around?

Whether it's switching between the screen or the screen, whether it's switching between apps or the screen flickering.

The first two are solved by three clear mobile phones.

The latter needs to go to the after-sales testing hardware Xiaomi authorized repair point.

Are you using the original charger, this may happen if it is not the original one.

Mine is the same, I went to the store to fix it once, and I topped it for February, and now it doesn't work again, and I almost want to smash it.

It means that mine is also changed to the charging port and it still doesn't work.