When installing, how to remove static electricity in your hands

It's not easy to say the harm, it depends on whether you are unlucky or not.

You don't need to find something special to go to static electricity, just touch the heating.

Static electricity can sometimes reach tens of thousands of volts, especially in winter. For example, the sparks that appear after wearing chemical fiber clothes can sometimes penetrate the CPU and the like, and there is also a chance.

When the electrostatic voltage reaches 2000 volts, the fingers will feel it; When it exceeds 3000 volts, there are sparks, and the fingers have a pinprick-like pain; When it exceeds 7000 volts, the person has the sensation of electric shock. In everyday life, the electrostatic voltage generated can sometimes be as high as tens of thousands of volts. By the way, that static electricity can sometimes ignite combustible.

Just touch any well-grounded metal object.

There will be static electricity on the human body, and the static electricity will be greater when the weather is dry, and the static electricity may sometimes damage the electronic components when assembling the computer, so the static electricity on the body is removed first when assembling the computer, and try not to disassemble the unused accessories in advance during the operation. After dismantling, it should also be placed in the bag.

Very simple. The host is grounded, this will, just find a nail or something metal to press under the host.

Then, you take off your shoes and stand barefoot on the ground.

Finally, you can install your computer freely, and you don't have to worry about static electricity harming your computer anymore......

Keep your hands on the metal or on the wall for a few seconds!

Hazards of static electricity.

With a static removal ring, the electronic market has to buy, ten quick money.

Wash your hands! Grab a wet rag!

Just touch the heating pipes.

That's what I did.

It's okay to touch something made of wood.

The best way to do this is to wash your hands! ~

Of course, what the above two people are talking about is the most direct way.

1.Electrostatic electrodes are susceptible to damage to integrated circuits.

Therefore, before installation, it is best to touch the grounding conductor with your hands or wash your hands to release the static electricity that may be carried on the body. Avoid the hazards caused by static electricity.

2.Take all the parts out of the box, don't rush to take them out of the anti-static shielding bag first, check the instruction manual and driver of each part first.

Whether it is complete, and carefully read the hardware installation instructions.

3.Before the motherboard is installed in the chassis, the CPU and memory should be installed, and when installing the AGP and PCI cards, anti-static gloves should be worn before operation. It is necessary to make sure that the installation is in place, because when installing the screws, some cards will stilt up, causing poor contact or even damage.

4.After installing the basic hardware, it is recommended to start installing only the necessary hardware, such as CPU, motherboard, memory, cooling system, power supply, graphics card, etc., and other hardware can be connected after the test is normal.

5.Do a clean up and remember to clean the motherboard with an anti-static brush.

6.The last step: power-on check, if the computer is normal boot self-test, the monitor is displayed normally, then the assembly of the computer is successful, if it is not successful, please check the problem carefully and solve it.

Correctly equipped with anti-static gloves, anti-static wrist straps and other related products to prevent static damage, if you have any questions, you can log in to the anti-static information network to ask the relevant technical personnel.

The electrostatic protection of the machine is generally achieved through the elimination of electromagnetic fields, the shielding of high-electrostatic parts, and the grounding of the machine. The simplest is the machine grounding method, where a metal wire can be used to ground the machine shell to eliminate machine static electricity.

When the indoor air humidity is lower than 30%, the machine is very easy to rub and generate static electricity. In order to prevent the occurrence of static electricity, a certain humidity should be maintained indoors, and the relative humidity of the environment should not be less than 50%, and the specific methods include mopping the floor frequently, sprinkling water frequently, or humidifying with a humidifier.

In addition, the elimination of machine static electricity can also start from the overall production environment, for example, anti-static floors, floor mats, all tools involved in the production of anti-static products as much as possible, so that static electricity does not remove self-retreat.

How to eliminate static electricity in a dry winter? You might as well try the following tricks: 1. Fill the spray bottle with water, and then spray the appropriate amount of water on the clothes, or gently wipe the clothes with a damp cloth to reduce the dryness of the clothes and eliminate static electricity. 2. You can hang your clothes in the bathroom or in a room with a lot of water vapor to eliminate static electricity by increasing humidity.

The grounding wire or processed raw materials should not be too dry.

The easiest way to do this is to use a plug with a grounding wire.

1.improve the grounding method;

2.Check whether the machine is leaking and check for non-static faults;

3.Eliminate static electricity, buy or make your own air humidifier;

4.From the standard point of view, the main work of anti-static in industrial production includes: the development of control plans according to production, personnel training, infrastructure and protective products, program implementation supervision, inspection and monitoring of facilities and protection;

5.The most effective measure is to "connect" the human body to the earth, that is, to "ground". Therefore, people should wear anti-static shoes.

To keep the human body connected to the earth, this requires that the ground is also anti-static in order to introduce the static electricity of the human body into the earth, so the ground can be used to make an anti-static mat, anti-static composite rubber board, guess the line and connect the ground with an anti-static grounding wire.

If it is equipment in the factory, the best way to eliminate the static electricity of the machine can also start from the overall production environment, for example, laying anti-static floors, floor mats, and all tools involved in production should use anti-static products as much as possible, so that the static electricity does not remove itself.

Hope it helps

How to remove static electricity from machines and equipment.

If it is equipment in the factory, the best way to eliminate the static electricity of the machine can also start from the overall production environment, for example, laying anti-static floors, floor mats, and all tools involved in production should use anti-static products as much as possible, so that the static electricity does not remove itself. Hope it helps

I work in the Pu film plastic factory, my hand touches the machine and is always electrified, how to solve the problem I work in the Pu film plastic factory, my hand touches the machine is always electrified, how to solve it You can go to the Internet to buy protective gloves, because static electricity is the essential property of the object, we can only prevent it, not remove static electricity.