win7 Ultimate Edition,Lao Li appeared on the boot screen,Then the blue screen,What s going on

It's useless to press whatever option appears on boot (it's an advanced option), this is related to your improper operation before shutting down, right? For example: playing games, watching **, operating big things, and using the computer for a long time caused by the card, right?

If you can't reinstall it yourself, go to the maintenance there to find a repairer to help you. If you can't turn on the machine by any method, this is caused by a sudden shutdown, caused by disk damage, one is to deduct the motherboard battery and put it on for a while, and the other is to put it on for a period of time to try to turn it on, or you can't repair it.

How to deal with the blue screen of the computer:

1. Restart the computer, press F8 until you enter the system, and select the last correct configuration to try.

2. If the software or driver is installed before the blue screen, enter the safe mode, uninstall or delete the newly installed software and driver, and then boot the computer to try again.

3. If there is still a blue screen after deletion, or you can't enter the safe mode at all, then reinstall the operating system and try it.

4. If the blue screen is still blue after reinstalling the system, the hardware problem will be considered. First of all, clean the dust inside the computer thoroughly, and remove the memory, graphics card, and PCI slot.

Remove the device and test it with an eraser. Because the temperature caused by dust is too high, poor contact, etc., it will also cause a blue screen; At the same time, the CPU, graphics card, etc.

Remove the fan and replace it with a new heat dissipation silicone; Also, check that the temperature of all hardware is normal.

5. If it still doesn't work after cleaning the computer, then use the replacement method to check the computer hardware, if there is no replaceable hardware or you are not familiar with the computer, it is recommended to find a specialty.

Handled by maintenance personnel.

6. Hardware replacement is troubled in the following order: memory, hard disk, graphics card, motherboard, power supply, other hardware, and CPU.

Blue Screen**: 0x0000000a

Blue screen causes: 1. Mainly due to the installation of defective or incompatible hardware (BIOS), drivers, and software.

2. When the system is upgraded to a new version of Windows, it is incompatible with the new version due to the incompatibility of the device driver, system services, virus scanner or backup tool.

Simple workaround:

1. If other hardware is installed, please remove it.

2. Reboot, and press the F8 key, then select "Last Correct Configuration" or "Safe Mode" to boot, and then delete or disable the newly added program or driver.

3. Detect and kill viruses.

4. Reinstall the operating system.

5. There is a problem with the memory.

Solution: 1. If it is not the latest system patch package, please upgrade the latest system patch package.

2. If it appears after the new driver or software is installed, please uninstall or disable the newly installed driver or software. If it appears after the newly installed hardware, remove it.

3. If the computer does not boot normally, you should try to boot up with "Last Correct Configuration" or "Safe Mode", and then delete or disable the newly added program or driver.

4. If the above methods are invalid, it is recommended to reinstall the system.

5. Hardware detection, please focus on memory detection.

Is that okay?

1. There are a lot of blue screen failures, and I personally summarized it for non-professionals: Generally, it is not a memory module or a system problem!

2. Check the connection between the memory module and the hard disk first, your memory module may be damp, clean the memory module and the memory module installation slot with alcohol. If the memory module and hard disk are fine, then check the computer's cooling system, it doesn't work, you just need to change the installation system!

3. There are generally few problems with the hardware of the computer, and it is generally a problem with the hard disk channel for a long time, and there will be no problems with the new computer.

4. Now the mainstream installation system super U disk boot disk U Guard (uweishicom) production tool, convenient and fast, the system is clean, and the later maintenance is also very complete!

5. I hope it can help you.

Looks like you're going to need to redo the system.

1.Once in a while, this kind of problem can be solved by restarting the computer.

2.Often this is the case with software issues: boot up, press F8, enter into safe mode, advanced boot options, restore the last correct configuration, press Enter. See how it goes, and if it doesn't work, then reinstall the operating system.

3.Hardware problems: If it still doesn't work after reinstalling the system, there is a problem with the memory module, remove it to clean up the dust, eraser the gold finger, clean the slot, reinstall it in another slot, and replace it with a new memory.

4.If the disk is too full, it will also malfunction, so you can clean up the garbage.

5.One-click restore or redo the system, repair.

There are many possibilities.

1. Software compatibility problems cause a blue screen on the computer.

If the driver is incompatible with the hardware and may cause the blue screen phenomenon, it is recommended to install the driver in the hardware gift disc (to match the operating system used), and the driver does not need to be up to date.

2. The computer blue screen is caused by poor contact of the memory module or memory damage.

In the process of system operation, almost all the high-speed access operations of data have to be carried out in memory, if the memory module is not in contact or damaged, there will be problems in the access of system data, which can easily lead to the system blue screen and crash, and the general poor contact of the memory module is due to the accumulation of too much dust in the computer, or the memory is not plugged in tightly. Tease.

Solution: Clean up the dust in the chassis, unplug the memory module, wipe the gold finger of the brigade finger with an eraser, and then plug it in again.

3. Virus Trojan causes a blue screen on the computer.

Nowadays, there are more and more types of virus Trojans, and there are many ways to spread them, and it is impossible to prevent them, some virus Trojans infect system files, causing system file errors, or causing system resources to be exhausted, and may also cause the occurrence of blue screen phenomenon.

4. Bad sectors on the hard disk cause a blue screen on the computer.

Like memory, the hard disk will also carry some data access operations, if there is a bad sector in the area where the access and reading system files are located, it will also cause the system to fail to operate normally, resulting in a system crash and a blue screen on the computer. It is recommended to reformat the system partition after backing up important data (there will be an option to format when reinstalling the original Windows system), if the format is successful, it will not affect the use, otherwise the partition can only be discarded or the hard disk can be replaced.

Boot blue screen: Generally, the boot blue screen is related to your operation before shutting down (please think about what you did on the computer before shutting down, and ask me if you have any questions).

Immediately after booting, press f8 to the advanced option to appear in the let go, select "the latest correct configuration" enter to repair, not yet press f8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a blue screen, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something that is not suitable for the promotion of training, and uninstall all the inappropriate things before the accident, or restore the system or reinstall).

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If Aberfruit is not installing drivers, patches, and software step by step, don't install it if you find something that is not suitable.

In the hardware caused Liang Xiaoxiang, take out the motherboard battery and put it on the charge, plug in and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

1. If you used the computer normally before, and this problem has occurred recently, you can try to rule out whether it is a software problem and uninstall the software installed recently.

2. If there is no software change on the computer, you can try to fix it with software such as Guardian to see if it is a virus Trojan.

3. Reinstall the system, Microsoft's official engineers have said a word......Sometimes there are problems in the Windows system, and they can only recommend reinstallation to solve them.

4. Finally, there is the problem of computer heat dissipation or memory, and this problem will occur in low-configuration computers, that is, the ...... of fixed screen death or black screen of deathThis requires hardware replacement and upgrades.

First, when you are in safe mode (restart, press the F8 key at startup, and select "Safe Mode") to see if the blue screen appears. If the blue screen does not appear, it can be inferred that the cause of the incident is that the driver software is expired and the third-party program is interfering.

If the problem is not solved, it is possible that the software conflict caused Lanhong to change the screen. You can use a 'clean boot' to troubleshoot, identify the problematic software, and then consider a solution.

2.If the blue screen is still in safe mode, the problem may be due to unstable hardware. Here are some general troubleshooting steps for hardware blue-screen judgment that you can try:

1.If you have recently replaced your hardware, please replace it with a new one or a new one.

2.If you have more than one memory module, keep only one and unplug the rest.

3.Confirm whether the wiring is loose and whether there is too much dust in the chassis, and fix and clean it.

4.Replace it with a different power supply.

Looks like a dx file.

The recommended action for this issue is to go to your graphics card manufacturer** to get the latest matching driver, if you have this problem after updating the driver, it is recommended that you roll back or reinstall the more stable version of the driver.

Note: You should only install WHQL-certified drivers.