How can there still be bad sectors after diskgenius is repaired

How do you know if there is a bad path?

The real physical bad sectors need to be confirmed with an MHDD scan.

And generally there is a physical bad sector, only shielding, and even if it is shielded, it will not spread for a long time.

During the warranty period, if you confirm that there is a physical bad sector, hurry up and find the merchant to warrant it.

I think it's a physical bad sector. Having a physical bad sector does not necessarily mean that the hard disk cannot be used, or that the system cannot be reinstalled, etc. Because the computer's storage on the hard disk is not necessarily continuous.

For example, after the head detects a bad sector, it will continue to read and write across this area, and there is no problem, but the bad sector will greatly affect the computer's read and write speed to the hard disk.

Hard drive repartitioning can repair bad sectors, but the specific situation still needs to be detected. Changsha Yijia focuses on server data recovery, disk array RAID data recovery, fiber (disk) array cabinet data recovery, hard disk data recovery, mobile hard disk data recovery, embedded DVR data recovery, SD card data recovery, XD card data recovery, CF card data recovery, memory stick data recovery, U disk data recovery (USB disk data recovery), etc.

The software can't fix the real physical bad sectors, it just flags the physical bad sectors. Skip bad sectors when installing software. Reinstalling the system and formatting the hard drive can sometimes fix the bad sectors. It can only be fixed unless it is low.

Normally, the hard disk repairs the bad sectors just shielding the bad sectors. Ensure that the bad sector cannot be detected after the repair.

However, it is normal for the hard disk to use and then produce new bad sectors. If there are too many bad sectors, it will not be repaired.

diskgenius can only shield the partition of the bad sectors through software, which cannot prevent the hard disk from expanding the bad sectors, and the more bad sectors are used over time.

It wasn't fixed. It may be that the previous bad road has been repaired, and a new one has come out.

Depending on the size of the hard drive, the scanning repair time is also different, usually the scanning time is one hour, and the partition can be scanned during the scanning, which will be a little faster.

Tool: Computer.

1. Double-click to open the software on your computer.

2. After entering the software, click [Hard Disk] at the top of the interface, and then click [Bad Sector Detection and Repair].

3. Select one of the hard disks, and then click [OK].

4. Then click [Start Detection] at the bottom of the interface.

5. Wait for a while to complete the scan.

DiskGenius Disk Bad Sector Repair: Flags the bad sectors of the hard disk so that the computer does not access those problematic sectors. And divide the bad sectors of the flag into an inaccessible partition and manage them centrally.

If the logical bad sectors can be repaired, the logical errors can be repaired again, such as partition tables and file system errors.

Hard drives are very afraid of dust. If dust gets on the board, it can cause the hard drive to work unstable, or cause damage to internal parts. The function of the hard disk has a great relationship with the life and temperature, the temperature is too high or too low will cause the clock frequency of the crystal oscillator to change, which will cause the circuit components to malfunction, and if the temperature is too low, it will lead to the condensation of moisture in the air on the components, resulting in a short circuit.