What are the classifications of anti static flooring?

It can be roughly divided into: network flooring, all-steel anti-static flooring, aluminum alloy anti-static flooring, calcium sulfate anti-static flooring, ventilation board; Depending on the veneer, there are hydronamine (HPL) surface, PVC surface, and ceramic surface. Ceramic anti-static flooring.

It is made of anti-static tiles as the surface layer, composite all-steel flooring or cement particleboard, and edge sealing with conductive rubber strips around it (ceramic floors without adhesive strips are easy to fall off porcelain when bumped). It has the advantages of stable anti-static performance, environmental protection, fire prevention, high wear resistance, long life (service life of more than 30 years), high bearing capacity (uniform load of more than 1200kg square meters), waterproof, moisture-proof, good decoration effect, etc., and is suitable for all kinds of computer rooms. The disadvantage is that the floor itself is heavier (more than 15kg for a floor), which has a certain impact on the load-bearing of the floor slab; In addition, professional installers are also needed to install it well, otherwise the installation will be uneven.

All-steel anti-static flooring: (non-standard type and national standard type), is the use of high wear-resistant melamine HPL fireproof board or PVC as the surface layer (due to the dry climate in the northern region, it is not easy to use HPL fireproof board veneer), steel shell structure substrate, in addition, according to whether there is black adhesive strip and borderless and edged. The advantage of all-steel floor is that it is easy to construct, there will be no gap problem after installation, and it is easy to replace, and the disadvantage is that the surface material is not wear-resistant, short life, easy to peel and warp, and it will be replaced in a few years.

Aluminum alloy anti-static flooring: The product is made of high-quality cast aluminum profiles, stretched, and the surface layer is highly wear-resistant PVC or HPL veneer, and the conductive glue is pasted, which has the effect of permanent non-rusting of the substrate and repeated use, thus effectively solving the product defects of composite flooring and all-steel flooring, and tailor-made high-grade anti-static flooring, but its cost is too high.

Nowadays, people are more particular about decoration, we know that the types of flooring materials on the market are also divided into a variety of types, at present, like anti-static flooring is more popular with people. Let's introduce to you what are the types of anti-static flooring.

1. Composite anti-static flooring.

This kind of wooden particleboard can be said to be not only light in weight and cheap, but also has the advantages of anti-static, fireproof, moisture-proof, wear-resistant, long service life and good decorative effect. However, it has a certain impact on the load-bearing of the floor slab, and this material also needs to be installed by professionals, otherwise it is easy to lead to unevenness.

2. All-steel antistatic flooring.

The all-steel anti-static floor is made of highly wear-resistant fireproof board or PVC as the surface layer, and then it is still based on the steel shell structure, and then stamped and welded, which can be said to have the advantages of high strength, fireproof, moisture-proof, convenient construction, and no gaps, and the most important thing is that the material of the surface layer is relatively wear-resistant during use, and it is easy to warp.

3. Aluminum alloy anti-static flooring.

This material is made of cast aluminum profiles, and it has also been stretched at high temperature, which is not easy to rust and environmentally friendly, but the cost will be much higher than the previous ones. Therefore, you must choose according to your actual situation.

4. Ceramic anti-static flooring.

It is made of anti-static tiles as the surface layer, and then adds some other materials to this one. This kind of floor can be said to have the advantages of stable anti-static performance, fire resistance, wear resistance, high bearing capacity, moisture resistance, etc., and this material is more suitable for it and is widely used in various computer rooms.

Summary: What are the relevant contents of the types of anti-static flooring are introduced here, and the above recommends several kinds of anti-static flooring, which can be said to have its different characteristics, and can be determined according to their own needs when choosing. I hope the above introduction is helpful to you.

Anti-static silver reckless electric flooring is relatively uncommon in life, most of them are used in integrated circuit clean workshops, radio transmission control rooms, microelectronics industrial plants and hospital operating rooms and other places, because there are many types on the market now, so consumers should choose according to actual needs. So, what are the types of anti-static flooring? Let's take a brief look at it together.

1. Anti-static tiles.

Anti-static tile is in the firing process, add an appropriate amount of anti-static materials, so that its resistance value is between 106 -109, the performance is very stable, green environmental protection, easy construction, if the tile is paved with aluminum foil or copper foil, its anti-static effect will be better.

2. PVC anti-static flooring.

At present, the PVC anti-static flooring on the market is generally sheet or coil, the material is lighter, the construction is convenient, and the performance is also very stable, but the requirements for construction are relatively high, if the master's installation technology is not hard enough, it is easy to warp or blister.

3. Anti-static flooring.

There are many advantages of anti-static front electrostatic flooring, beautiful appearance, good anti-static effect, will not be affected by environmental humidity, temperature and other factors, and acid and alkali resistance, wear resistance, impact resistance are also very good, suitable for use in a variety of occasions.

4. Ceramic anti-static flooring.

Ceramic anti-static floor is made of ceramic tiles with anti-static properties as the surface layer, and then sealed around the floor with conductive adhesive strips, with stable performance, fireproof, moisture-proof, wear-resistant and other advantages, but also green and environmentally friendly decoration materials.

5. All-steel anti-static flooring.

Most of the all-steel anti-static flooring is made of melamine fireproof board as the surface layer, which has excellent wear resistance and anti-static properties, and is convenient for construction, there will be no obvious gaps after installation, and it is also very convenient to replace.

6. Aluminum alloy anti-static flooring.

The surface layer of the aluminum-made gold anti-static floor is made of aluminum alloy, with stable performance and durability, which can be said to be a customized product for anti-static electricity, but the cost is too high, and it must have enough economic ability to buy.