The dormitory has a wireless network, but the Internet speed is always not up

Updated on technology 2024-08-07
10 answers
  1. Anonymous users2024-02-15

    You are not routed; Just distribute the 10 trillion average setting.

  2. Anonymous users2024-02-14

    1 To keep your computer normal and free of viruses and malware, it is recommended to regularly use 360 Guard, Kingsoft Guard and other tools to clean up system junk and temporary files (IE cache) generated by the Internet, and check and kill malware. Restart your computer when you're done.

    2. If the computer configuration is poor, try to set the virtual memory to a larger one, and the anti-virus software installation occupies a small amount of resources, such as nod32, or only install an auxiliary anti-virus software.

    3 The cat has been left open for a long time, it is very hot and hot, it is recommended to place the cat in a ventilated place as much as possible, and do not overlap with the router. So as not to be too high, otherwise there will be a fake crash, restart the cat is better, it is really not good It is recommended to change a cat with good performance (I hit ** to telecom, free to change).

    4 Several computers share the network, because the router is too poor, others use P2P to watch movies, etc., it will drag the router to death, restart the router will be better, the long-term solution is to change to a better enterprise-level router.

    5 Microsoft's system actually reserves 20% of the network bandwidth to the system, we can take this part and use it, open Start - Run, enter :, open Group Policy, select Local Computer Policy - Computer Configuration - Management Template - Network - QoS Datagram Scheduler, double-click Limit on the right side to reserve bandwidth, set to disabled.

    6. Modify the IP address to static settings to avoid slow startup of the computer, and after the IP lease expires, the IP will not be configured and the network will be disconnected.

    7 Someone may have installed and used rate-limiting software on the network, it is recommended that you turn on the ARP firewall (360 has ARP protection).

    8 It is recommended to manage the boot startup items and stop the useless startup items, especially those who look at the software of ** and **, which run in the background and account for the network speed. Start-Run-Enter msconfig-OK-Click "Start" in the "System Configuration Utility" window-Start, except for the input method (ctfmon) and anti-virus software, the general program can be turned off. You can also use 360 and other software to intelligently optimize boot acceleration.

    9 It is recommended to install only one main antivirus software, as installing multiple will occupy computer resources, which will make the computer slower and the Internet will feel slower.

  3. Anonymous users2024-02-13

    There are several reasons why I can connect to wifi but can't

    1. The wifi itself is a problem, the wifi may not be connected normally, resulting in the inability to access the Internet;

    2. Router problems, the router may be overheated or damaged;

    3. There may be broadband arrears, resulting in inability to access the Internet;

    4. The wifi name contains Chinese, resulting in some computers unable to connect to the Internet;

    5. Computer system problems, there may be problems with the system, resulting in connecting to wifi but unable to access the Internet.

    Suggested workaround:

    1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and rule out the problem of wifi itself;

    2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet;

    3. Contact the broadband customer service to confirm whether the broadband account is abnormal, such as arrears, recharge the broadband, and then dial up the connection;

    4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting;

    5. If the above reasons are ruled out, it is likely to be a computer system problem for a long time, and it is recommended to restore the factory settings. See if that solves the problem.

  4. Anonymous users2024-02-12

    The wifi signal is full of mobile phones, which is the possible cause and solution of not connecting:

    1.First of all, check whether the wireless router is working normally, you can use other mobile phones or digital products to connect to the wifi signal, if you can connect and surf the Internet normally, then generally this router can work normally.

    2.The phone is turned on to sleep and the network is turned off.

    Check whether the phone has the option to turn off the network in the dormant state, the phone will be disconnected after a period of time or cannot receive the background chat software, the possible reason is that the phone is turned on the function of turning off the network by mistake.

    3.If you use the router for a long time, the router may freeze its death. Just restart your wireless router.

    4.The type of certification is not suitable. Try to change the authentication type of the router, it is better to choose the secure "WPA2-PSK" type mode, and the following encryption algorithm is better to choose "AES".

    5.The network settings of the mobile phone or router are abnormal. Consider restoring your router factory settings and cellular network settings.

  5. Anonymous users2024-02-11

    If the broadband modem can be connected to the network normally, then it is a problem with the router, and you can check whether the network cable is connected correctly. If the network cable between the broadband modem and the router is normal, you can restore the router to its factory value, and then reset the router parameters to see if it can be restored to normal.

    If your problem has been solved, please click on the end of the service in the upper right corner, give the answer a 5-star like, your support is the biggest motivation for me to move forward, and finally wish you a happy life! [Too happy].

  6. Anonymous users2024-02-10

    What is the reason why the mobile phone wifi signal is full but cannot access the Internet?

  7. Anonymous users2024-02-09

    Episode 29 What is the reason why the mobile phone signal is full but I can't get on the Internet?

  8. Anonymous users2024-02-08

    Question 1: What should I do if the wireless network in the school dormitory is very stuck The network mutual resources are not enough, and many people use it.

    The school's network is basically 2m, and you can use one floor.

    Unless you're pulling a line on your own, there's no way.

    Problem 2: What should I do if the wireless in the dormitory is too slow If the wireless is at the door, you can open the door of fate, which may be better.

    Question 3: What about the wifi network in the dormitory!! Beka! What to do!! 100 points First of all, you have to look at the bandwidth of your campus wifi, to see if the bandwidth is fast enough, the bandwidth is limited, and of course it is slow when there are more people.

    Wireless routers also have bandwidth, see if the bandwidth is enough, watch movies, play games are more bandwidth-intensive, affecting speed.

    If the router bandwidth is sufficient, and the campus is used by many people at night, you need to use some network acceleration software to speed it up.

    Question 4: In the school dormitory, the wireless network is very stuck, for what to talk about, ask God to help You use too many wireless networks around you, causing wireless networks to interfere with each other. This will definitely make your bandwidth smaller.

    Question 5: What should I do if the wireless network in the collective dormitory is slow The slow speed of using broadband Internet access may be caused by network congestion, insufficient bandwidth or computer viruses, etc., it is recommended to log in to the local speed test**or**speed test software, and observe the transmission speed: if it is 1mbps bandwidth, the transmission speed needs to be reached.

    80k s or more; 2Mbps bandwidth, transmission speed must reach more than 150k s; 4Mbps bandwidth with a transfer speed of 300k s

    The above are within the normal range, which means that there is no problem with the equipment and lines of the network, and the computer system needs to be checked.

    Question 6: The public wireless network in the dormitory, others are very well connected, I am very stuck, why On the one hand, your mobile phone and computer are set to automatically obtain the IP dns address, and on the other hand, you must confirm whether the network speed is limited.

    Question 7: How can I be faster with a good wireless network card in the dormitory There is no way to do this, you can pull a network cable by yourself.

    Problem 8: 20m net in the dormitory. Wi-Fi is too slow 5 minutes Hello, Questioner:

    1.A wired connection will definitely be faster than wifi speeds.

    3.Or channel problems, try changing the channel to 1 or 11 (mainly to avoid interference from surrounding routing channels).

    4.There is also a speed limit problem, if you can board the route, see if your mobile phone device is speed limited.

    Question 9: Why is the wireless network very stuck with 20M broadband I used TP-Link 85 yuan to buy in the dormitory with 20M broadband is actually not so wide, from your routing ** point of view, it should be caused by the transmission rate supported by the route is too low! The wireless signal transmits at a low frequency, resulting in slowness!

    If you change to a wireless router of more than 120 yuan, it will definitely be different!

    Question 10: The wireless network in the dormitory is particularly unstable What should I do We are the same here, but I have a method, generally I can't regret the Lu search, I stop for 20 minutes, and then connect, and connect it.

  9. Anonymous users2024-02-07

    Summary. Hello, I have seen your question and am sorting out the answer, please wait a while

    Hello, I have seen your question and am sorting out the answer, please wait a while

    It's normal. No, it doesn't work.

    In order to protect the rights and interests of internal personnel, the school's network often sets up ID authentication, that is, it needs to enter a password. Once entered, you can access the Internet, and you will need to re-authenticate after a long time.

    My line of rotten reeds dormitory is the wifi of the electric calendar, not the campus network, all the ways have been tried, pay, shut down and restart, mobile phone shutdown and restart, all have been tried to bring through, there was this situation before, but it can be used after a while, and it can't be used today, it's very sudden.

    I guess it won't be cut by the dormitory manager.

    Probably not, other dormitories are also telecommunications, and they can also be used normally, so it can't be just one of our dormitories.

    Have you checked the network cable?

    How to check, power, wireless, broadband, network these buttons are all lit, the button of network one is flashing, there is nothing else.

    Have you installed a router?

    Ann, there are two, a router and a cat, both of which show working properly.

    That's the carrier problem.

    Someone should take care of it tomorrow.

    Sometimes the network is divided by a multi-person system that assigns the network to other people, and your network may be divided.

    Someone will definitely deal with it tomorrow.

  10. Anonymous users2024-02-06

    Go buy a "wireless card". It is possible to connect to hotspots, wifi.

    The wireless network card is a device for terminal wireless network, and it is a wireless terminal device for Internet access through wireless connection network under the wireless coverage of wireless LAN. Generally speaking, a wireless network card is a device that does not need to be connected to a network cable, and a wireless network card is integrated in the general notebook, so the notebook can access the Internet through wireless, similar to a mobile phone, as long as the area contains a wireless network signal in the air, it can be connected.

    The desktop computer does not have a wireless network card, so it needs to connect the network cable to the network card interface to achieve Internet access, but it can be achieved by installing a wireless network card.

    At present, mobile phone Internet access is very common, this method is to use our mobile phone, connect the notebook to the mobile phone, use the mobile phone's network to make the notebook Internet There are many ways to connect, you can use Bluetooth, infrared, data cables. If the laptop also has Bluetooth function, we can use the mobile phone plus Bluetooth to access the Internet.

    The laptop can communicate with the mobile phone through Bluetooth, use the mobile phone as an Internet gateway, and then the mobile phone can dial into the Internet through GPRS or CDMA. How to have a red connection function on your phone, you can also access the Internet. It is not so convenient to use a data cable, but the stability is guaranteed.

Related questions
17 answers2024-08-07

There are several situations in which the Apple mobile phone cannot connect to wifi normally: 1. Confirm the wrong password entry solution: check whether the password is entered incorrectly or the characters filled in are case-sensitive, and the number of digits entered in the password is too long or too short, and there may be too many wireless network users connected, try to connect later; 2. The solution to the problem of not finding the wireless signal: >>>More

12 answers2024-08-07

Restart or delete the cache.

Delete the wireless cache, as shown in the figure below, there are several connected wifi signals under "Manage known networks", delete the excess signals, method: click on the corresponding wifi signal - forget. Then re-enter the password to connect to the wifi. >>>More

14 answers2024-08-07

The wifi signal is full, the network speed is slow, so as to improve the network speed, what is the router and 5G?

7 answers2024-08-07

Is it a wireless router? The wireless routing settings are incorrect.

7 answers2024-08-07

If Error 822 is displayed for broadband Internet access, it means that Network Access Protection (NAP) forces the client to become unresponsive. Some network services or resources may not be available. If the problem persists, disconnect, retry the remote access connection, or contact the administrator of the remote access server.