-
Accurate to the thousandth place is to round the number 8 on the thousandth place and keep three decimal places after the decimal point, not enough to add zero, that is:
-
If the thousandth is equal to or greater than 5, the thousandth should be added by 1, and if the thousandth percentile is less than 5, it will remain unchanged. You see that the thousandth place in the question is 2, and the thousandth place is 8, so the thousandth plus 1 is 3, so that it is accurate to the thousandth.
-
Accurate to the thousandth, that is, 3 decimal places are reserved after the decimal point, and the fourth decimal place is 8, rounded to yes.
-
The third digit after the decimal point is the thousandth place, which is 2
The fourth digit after the decimal point is 8, rounded to one place, then the thousandth place is 2+1=3.
Accurate to the thousandth is.
-
Yes, the thousandth place is three decimal places (2), and the 8 in the fourth digit and the 9 in the fifth digit go up.
-
Accurate to the thousandth, mainly the thousandth rounding.
-
Accurate to the thousandth is: , according to the "rounding" principle!
-
Accurate to the thousandth place is to keep three decimal places. According to the rounding rule, the result is:
-
The choice is rounded to the thousandth place, approximately equal to =
-
The thousandth place is the third decimal place, rounded to the nearest four places.
-
What is accurate to the thousandth?
Accurate to the thousandth =
According to the rounding rule, a number is exactly 10,000 digits to look at the number on this thousand, and the thousand digits are 5 greater than 4, and they should be carried forward.
-
Dear, when you see this question, click in. Dear, this math problem is not very difficult, it is rounded, the problem requires accuracy to the thousandth place is to keep three decimal places, rounded from the fourth place, the specific answer is.
-
The first decimal place is the tenth place, the second place is the percentile, and the third place is the thousandth place, so the accuracy to the thousandth place is to keep three decimal places, just look at the fourth place after the decimal point, and round off if it is 3, so the accuracy to the thousandth place is.
-
Accurate to the thousandth is. Hopefully, thank you!
-
To get a decimal place to the thousandth is to round it to three decimal places.
-
Because:Accurate to the thousandth is to keep to three decimal places, and the calculation needs to be calculated to four decimal places, and then rounded. (One decimal place is the tenth place, the last two places are the percentile, and the last three places are the thousandth place).
So:Accurate to the thousandth of the sail on the sail about.
-
(Precise and fierce to dismantle the round thousandth branch royal shed).
-
Summary. In your question, the thousand digit is the third decimal place, and you need to see that the fourth digit is 8, and 8 is greater than 5, and you need to advance 1 to the thousand digit, that is, 5 needs +1 = 6 to get.
Accurate to the thousandth =
Hello! I'm glad to answer for you, I'm Mr. Zhang, who knows that the special adviser serves the people. I've seen your question, and I'm sorting out the answer for you, please wait a while.
Dear, the decimal you provide is accurate to the thousands, and the teacher will analyze how to calculate this kind of problem for you in detail, please wait a moment.
If the latter digit is greater than or equal to 5, then it is necessary to advance 1 to the previous digit, that is, the previous digit needs to add 1, if the latter digit is less than or equal to four, then it is not a branch beam that needs to be carried.
In your macro envy problem, the thousand digit is the third decimal place, and you need to see that the fourth digit is 8, and 8 Da Sui is based on 5, and you need to advance 1 to the thousand digit, that is, 5 needs +1 = 6, and the shield can be obtained.
-
The thousandth place is the third decimal place.
The fourth decimal place is 4, 5
So accurate to the thousandth is.
-
Accurate to the thousandth is. The 10,000th place is 4, rounded.
-
Accurate to the thousandth place is to keep three decimal places, i.e.
-
Accurate to the thousandth place, it is to keep 3 decimal places, and 7 is rounded to 1,>
-
Hello, the thousandth place is the third decimal place, according to the principle of rounding, see that the fourth place is 7 5, so accurate to the thousandth place is.
-
Summary. Rounding, thousandths, keeping three decimal places).
Accurate to the thousandth =
Accurate to the thousandth =I'm answering for you :
Hello! According to the current topic information, accurate to the thousandth? This is a simple calculation problem. Be. Good.
But my kids won't.
Rounding, thousandths, keeping three decimal places).
Answer: Rounded, thousandth, three decimal places).
Do you keep two decimal places?
Good. Rounded to two decimal places).
Answer: Rounded, keep two decimal places).
-
Accurate to the thousandth is approx.
The third decimal place to the right is the thousandth place, and when accurate to the thousandth place, the number in the thousandth place is rounded according to the number in the thousandth place.
-
According to the inscription, it can be known that accurate to the thousandth place is to keep 3 decimal places after the decimal point. Look at the fourth decimal place is 6, rounded, so the previous digit is accurate to the thousandth place.
-
The third place to the right of the decimal point is the thousandth place. When it is required to be accurate to the thousandth place, it is required to be accurate to the third decimal place. So accurate to the thousandth is.
-
3.00468 decimal point is followed by tenths, percentiles, and thousands, so keep to the thousandths.
-
Small accurate to the thousandth, it depends on what the thousandth is the number? The first place is the tenth place, the second place is the percentile, the third place is the thousandth place, the fourth place is the thousandth place, six is more than five, and it needs to be exhausted, so it is accurate to the thousandth place, and if you want to be accurate to the thousandth, you have to see what the percentile is? The first place is the tenth place, the second place is the percentile, the third place is the thousandth place, the fourth place is the thousandth place, six is more than five, and the guards are needed, so it is accurate to the thousandth.
-
This number, if it is accurate to the thousandth place, is accurate to the 3rd decimal place. That is.
-
The thousandth is 4 and the thousandth is 6, so it is accurate to the thousandth and rounded up.
-
Accurate to the thousandth means to keep three decimal places, according to the principle of rounding, the fourth decimal place is 6 more than 5, to advance one place, so accurate to the thousandth place.
-
To the thousandth is to the third decimal place.
So accurate to the thousandth.
Rounded to:
-
Accurate to the thousandth place, because 10,000 points are 8, and they are rounded off.
-
The thousandth place is three decimal places.
So, accurate to the thousandth is it.
-
Accurate to the thousandth, it depends on the number on the thousandth place, that is, the four decimal places are 6, which is obtained according to the rounding method.
The first decimal place is the decimal place. The second digit is the percentile and the third digit is the thousandth, so to be accurate to the thousandth digit, you need to look at the fourth digit. Then round it off. >>>More
1) Read the integer first. If you look at the exposed part of the number on the fixed sleeve on the left side of the differentiation, then it is the integer part of the measured part size. 2) Read decimals. >>>More
An outside micrometer can be used to measure shaft diameter as well as roundness. It can also be used to measure the size of other shapes. Because it's so accurate. >>>More
Of course, it is a systematic error.
The measuring method of the micrometer.
Before measuring the object, first wipe the surface of the measuring object, then rotate the ratchet to adjust the distance between the measuring drill and the micrometer screw to be larger than the measured object, and then put the measured object. >>>More