How can the environmentally friendly putty glue be sprinkled on the body and not wash off

Report a report of violation.

Infringement Complaints|2013-11-19 19:42 Enthusiastic netizens 1, the removal of universal glue stains Clothes stained with universal glue stains, can be used acetone or banana water drops on the glue stains, to use a brush to continue to brush repeatedly, until the glue stains become soft and take off from the fabric, and then rinse with water. If it doesn't work once, you can brush it several times repeatedly and finally wash it.

Do not use this method for fabrics containing acetate to avoid damaging the fabric of the garment. 2. Removal of white latex stains White latex is a synthetic resin, which is polyvinyl acetate syrup. It is characterized by the fact that in addition to nylon silk and the like, it has an adhesive effect on most fiber quality materials, so it can be firmly adhered to clothing.

It also has the ability to dissolve in a variety of solutions. Let's use its own characteristics to find a way to get rid of it. Available in 60 liquor or 8:

2 The mixture of alcohol (95%) and water soaks the white latex stains on the clothes, and after soaking for about half an hour, you can scrub with water until it is clean, and finally rinse with water. 3. Removal of gum stains If the clothes are stained with gum stains, you can first use raw egg whites to remove the viscose on the surface of the clothes, and then wipe off the loose residual particles one by one, and finally wash them in soap, and finally rinse them with water. If it is a fabric that cannot be washed, it can be applied with carbon tetrachloride to remove any residual dirt.

4. Removal of glue stains If the clothes are stained with glue and other stains, the polluted part of the clothes can be soaked in warm water, when the stains are dissolved in water, then rub them by hand until all the stains are rubbed off, and then wash them with warm washing liquid, and finally rinse them with water. Hope it helps.

I really don't know about this, and there are many people who get it on me.

Prepare materials: toothbrush, soap, salt, water, basin, toothpaste. 1. Sprinkle the appropriate salt where the putty gets into the clothes, and then use your fingers to spread the salt.

2. After waiting for a few minutes, dip a discarded toothbrush with a small amount of water and repeatedly brush the putty to the place where the putty gets to the clothes, so that the putty gradually dissolves. 3. After gradually dissolving the putty, dip a little water in the soap, and then evenly apply it to the place where the putty still remains on the clothes. Don't apply too much soap to completely remove any remaining putty and other dirt from your clothes.

4. Use a toothbrush dipped in water and a small amount of toothpaste again to scrub the putty powder on the clothes for about 2 minutes to make the putty on the clothes completely dissipate. 5. Finally, rinse with water.

Here's how to get rid of it:

If these things are obvious on the wall and cannot be removed, you can use the method of rubbing, using plaster or precipitated calcium powder, rubbing it on the cloth, or using fine sandpaper to wipe it lightly, which can also be removed.

Squeeze some toothpaste on a damp cloth to wipe off some of the more superficial things.

If it is a relatively large thing, such as a nail, a screw, etc., there may be a hole when you cut it out, then you need to buy putty powder again to fill it. The specific method is to take it out and fill the hole with putty powder.

Precautions for scraping putty:

1. The putty scraped is not a requirement for light, but for leveling.

2. The putty that paints the wall is generally required to be scraped three times, but each time the putty is scraped is required to be dried and then painted again.

3. When scraping putty, you must avoid cold wind blowing directly, so that although it seems that the wall can be blown dry, but in fact, the moisture of the wall is locked in the wall.

4. When the base layer is highly absorbent, it should be sealed with a primer before scraping and applying the putty, so as to avoid the rubber in the putty being too absorbed by the base layer and affecting the adhesion of the putty.

5. The quality of putty must be good when scraping putty, and it is necessary to brush the roof first, and then brush the wall. Master the inclination of the tool when scraping and applying, and use even force to ensure that the putty is full. When operating, you must pay attention to the uniform force.

It's the putty on the ground that the house has been renovated. It is best to use the remaining carpentry board and ask the master to give you about 10*40. Shovel hard with one end of the woodboard.

It doesn't have any effect on your ground (e.g. scratches or something).If you're renovating an old house. The only thing on the wall is to shovel with a shovel.

It's slow. You have to soak the wall before shoveling. It can also be sharpened with a steel wire grinding wheel.

Roll putty glue or white glue on the wall at least twice. Hope it helps.

This is only done in the simplest and oldest way, with a shovel and then with a rag! It is best to do ground protection before renovation, so that it will save a lot of trouble. If you really don't want to do it, find a cleaning company and solve the problem completely!

Use a blade or a spatula to make it little by little. With others, it will hurt somewhat.

Putty powder is a kind of building decoration material, and the main components are talcum powder and glue. A layer of white on the surface of the newly purchased rough house - putty, usually the whiteness of putty is above 90 and the fineness is above 330. Putty is a substrate used for wall repair and leveling, which lays a good foundation for the next step of decoration (painting and wallpaper).

Putty is divided into two types: interior wall and exterior wall, and the exterior wall putty should resist wind and sun, so it has high gelatinity, high strength, and slightly lower environmental protection index. The comprehensive index of interior wall putty is good, healthy and environmentally friendly, so the interior wall is not used externally, and the exterior wall is not used internally. Usually putty is gypsum or cement-based, so that the surface is rough and it is easier to bond firmly.

However, during construction, it is still necessary to apply a layer of interface agent on the base layer to seal the base layer and improve the adhesion of the wall, so that the putty can be better bonded to the base surface.

Putty is generally composed of base material, filler, water and additives.

The binder, also known as the binder, is the most critical component of putty, mainly playing various roles such as bonding. The most commonly used binders for putty are cement and organic polymers, which are divided into emulsions and latex powders. Cement is a binder with good cohesiveness, durability and reasonable cost performance, but it has poor tensile strength and crack resistance.

Organic polymers can be modified and toughened to improve putty performance.

Fillers mainly play a filling role, and commonly used are calcium carbonate, talcum powder and quartz sand. Attention should be paid to the combination of packing fineness.

Additives include thickeners, water retention agents, etc. Thickeners and water-retaining agents play the role of water retention, improve storage and construction performance, and cellulose is generally used. Antifreeze is mainly used to improve the storage stability of putty at low temperature, and slip agents and water reducers are generally used in high-grade putty to improve the construction performance of putty.

Some also add fibers to resist cracking.

Depending on whether your putty is oily or water-based, the oily heat will melt and then wipe it clean with something else, just wash it with water-based water.

It's best to protect it in advance, there is no easy way to get rid of it, only shovel with a shovel.

Just leave it to the workers to deal with.

Putty, get it on the clothes and scrub it with a brush, there will be no traces.