What s going on with the keyboard getting into the dust, how to clean the keyboard

Heavy dust treatment method: disassemble and clean it, if it is a desktop, it is easier to handle, disassemble the keyboard fixing screws, you can see all the internal structure, handle it carefully (do not turn the keyboard over, otherwise the keycaps will fall to the ground).

If the dust accumulation is not serious, you can directly use cardboard strips, paste double-sided tape on the head, and twitch back and forth in the key seams.

Precaution: Do not eat snacks or drink drinks near the keyboard to avoid contaminating the keyboard. Don't use your computer in a dusty place.

Start by using a screwdriver to unscrew the screws on the back of the keyboard. It should be noted here that some keyboards are not opened by unscrewing the screws on the back, and there are two or three screws under the keys on the front of the keyboard, and some of the keys need to be pried off the keyboard to see the rest of the screws.

After removing all the keys on the keyboard, we will find that in fact, the circuit part of the keyboard is still very clean, and there is no need to clean, mainly because the keys and the front panel of the keyboard are dirty, and we only need to clean these two parts. Soak the buttons and front panel in water with detergent for a while, and then gently wash them with a soft cloth or brush, and the dirt that has accumulated for a long time will be easily cleaned.

Finally, let the cleaned keyboard dry for a few hours or use a hair dryer to install the keyboard as it is. It should be reminded that some keys have reeds, and the reeds should be installed when installing, otherwise the keys will be damaged if used for a long time.

1. In fact, fingers often only touch the surface of the keyboard, and the surface is also the most likely to get dirty.

Unplug the keyboard, mix a small amount of dish soap with water, and scrub the keyboard with a soft cloth, pay attention to the soft cloth is moist, not dripping, otherwise it will damage the circuit.

If you don't think this is thorough enough, you can spray it with 84 disinfectant, also taking care not to form flowing water droplets.

1. Open the keyboard.

Use a screwdriver to unscrew the screws on the back of the keyboard, it should be noted here that some keyboards do not open the keyboard by unscrewing the screws on the back of the keyboard, and there are 2 or 3 screws under the keys on the front of the keyboard, and some of the keys need to be pry off the keyboard to see the rest of the screws. Unscrew it and we can open the keyboard.

Second, after the keyboard is disassembled, we will find that in fact, the circuit part of the keyboard is still very clean, and it does not need to be cleaned, mainly because the keys and the front panel of the keyboard are dirty, and we only need to clean these two parts. Place the buttons and front panel in the dishwasher and turn the dishwasher to medium intensity. Of course, we can also use detergent to clean, sometimes the dirt of the keyboard is easy to clean, but sometimes because of the long-term use of the keyboard, the keys are aging and yellow, which may not be easy to clean, you can put the keys in the detergent for a period of time, the effect will be better.

3. After washing, let it dry for a few hours, or use a hair dryer to dry, and install the keyboard as it is. It should be reminded that some large keys have reeds, and you should install the reeds when you install them, otherwise the keys will be damaged if you use them for a long time.

Lenovo V470 cleaning and changing keyboard tutorial.

How to clean up the keyboard dust:

If it's a regular keyboard, use a damp rag and cotton swab to clean up along the gaps in the keyboard. This can clean up ordinary dust and floating dust, or use keyboard mud to clean up stubborn sludge in deep crevices;

If it is a mechanical keyboard, you can use a key puller to remove the keycaps, clean the keycaps with water, and use a small brush to clean the floating ash of the keyboard. Or use the keyboard mud to clean up the dust in the deep crevices.

Method: Step by step, sell falsely, violently.

Using the key puller, remove the keycaps one after the other. In order to prevent the loss of keycaps, put them away uniformly.

How to clean up the mechanical keyboard.

After unplugging all the keys, gently lay the keyboard on its side and use a brush to sweep away the dust. If there are stubborn stains, you can use a blade to carefully scrape them off, being careful not to hurt the keyboard.

Prepare a basin of clean water, put the keycaps in the water, pour in an appropriate amount of detergent, and scrub gently.

How to clean up the mechanical keyboard.

After cleaning, place the keycaps on the side and dry them naturally (be sure to dry them thoroughly, do not have moisture, the mechanical keyboard is not waterproof, if water enters, it will cause damage to the mechanical shaft, or damage to the circuit).

How to clean up the mechanical keyboard.

In order, the keycaps can be installed on the middle bridge, so that the mechanical keyboard will be cleaned.

How to clean up the mechanical keyboard. end

Ordinary membrane keyboard (cheaper, generally between dozens and hundreds):

1. Turn over the keyboard, back up, and pat to clean up the clutter;

2. Stubborn stains and mud stains, gently scrape off with a razor blade;

3. Use a hair dryer to clean up surface dust and small debris;

4. Use a clean, damp cloth to scrub the oil clean.

Mechanical keyboard (**higher, generally 300 to 1,000 yuan):

1. Use the key puller to pull out the keycaps;

2. Use a brush to clean up the dust in the keyboard;

3. Put the keycaps in clean water, pour an appropriate amount of detergent, and gently scrub off the dust;

4. The keycaps are placed on the plane sideways and dried naturally;

5. Plug back into each axis of the mechanical keyboard in turn.