What are the disadvantages of carpentry making furniture? Why is it being eliminated now?

In the past few years, it is true that a lot of old craftsmen have been eliminated, and mechanization has changed the entire living state and industrial structure, but many things cannot be completed by machinery, especially with dovetails and carvings, high-precision woodworking craftsmen still exist. The appearance is that the artisan group is not connected, and the underlying reasons are complex. The basic condition for inheriting the spirit of craftsmanship is the relationship between master and apprentice, but the current education system only has the relationship between teachers and students, and perhaps the existing Japanese Kongogumi in 1439 may cause people to think.

<> mechanization can never replace manual work, the more manual things are, the more unique their value, which can not be replaced by any machinery! The rapid development of China's economy has forced many craftsmen to commercialize, and craftsmen lack a general environment, and craft carpentry will never be eliminated, after all, slow work can produce fine work. Mechanization can certainly improve efficiency and output, but the delicacy and charm made by traditional woodworking cannot be expressed by machinery.

The disadvantages of handmade furniture, due to the limitations of technology and equipment, handmade furniture, in appearance, is certainly not as beautiful as the products processed by machines. In terms of quality, the paint surface of handmade furniture is relatively rough and uneven, although handmade furniture is very good, but it also has disadvantages, that is, it is bulky and difficult to achieve refinement, and it is not comparable to modern furniture in terms of folding, handling and disassembly. It is not environmentally friendly, because it is handmade, it reduces the treatment of environmental protection, and the smell of paint spreads and other impacts on the environment.

The production time is long, because it is not an assembly line production of standard parts in the factory, and it is dependent on people. It just needs some special tools, and I don't have it at all, and if I am not a professional, then there will naturally be some errors in the process of quantity. It may seem like a simple way to make furniture by hand, but it's actually complicated.

First of all, handmade furniture, depending on what material is used, if it is ordinary wood, and then ask woodworkers to make it, it should not be as good as the sensory effect of selling, but the quality is ***. If it is a mahogany material, please process it by a carpenter who can do the work. The finished product is 10 times stronger than the one sold.

It takes a long time to make a piece of wooden furniture, and it takes a long time to ensure the quality. **Expensive, materials and manufacturing costs are the reasons for its high price. It's eliminated because today's audience is smaller.

Too slow, and very poor carpentry, the furniture he made was not standard. Because they are not industrialized, they can't keep up with their speed, they can't keep up with their precision, they can't be mass-produced, and it's also very high.

I think woodworking furniture is characterized by rare materials, high production costs, long cycles, and heavy weight. Because there are better alternatives, it will naturally be phased out.

Because of the limitation of the level of carpentry, the cabinets created cannot be the same as those bought, and they generally look relatively simple, and they are beaten at a glance. For its own reasons, it is difficult for carpenters to make valuable suggestions for our design, and they will only build according to our requirements.

For the woodworking industry, the qualifications are actually very low-end, because there are many types of woodworking, and you can start from the lowest end of the furniture factory. Overall, carpentry skills are reproducible skills and not high-tech that requires a lot of ingenuity.

Carpentry furniture is more cost-effective, the degree of fineness is high, the materials used are good, and now the elimination is not to, it can only be said that few people do this line now, because now more attention is paid to the speed of mechanized production, handicraftsmen are difficult to get attention.

Carpentry is the first group of people to make furniture, but with the development of the times, the furniture made by carpentry has a fixed style, less patterns, and a long time, compared with customized furniture, the cost will increase, but the quality is not necessarily better, so it will be eliminated.

Carpentry is becoming less and less now, in fact, the most fundamental reason is that the work of carpentry is not easy to do, the work is monotonous and hard, and the working environment is poor. Today's young people are so keen on jobs that they can earn efficiently and work in a good working environment, so that there is no successor to carpentry. <>

First, a large number of woodworking equipment appears in the traditional carpentry human resources cost and time cost is high, it is difficult for many manufacturers are unable to withstand this pressure, it is this pressure, the rapid development of science and technology has led to the emergence of woodworking machinery and equipment to continuously improve the technical substitution of eliminating a lot of carpentry personnel, carpenters are some farmers their knowledge and cultural level.

Low, the only way to earn living expenses is their own labor, now the machine can efficiently make them a few days to make out of the raw materials and accessories, manufacturers are giving priority to their own interests, naturally accept the machine instead of manpower, so that carpentry in the machine appeared after a large number of eliminated, scared off willing to flow into the woodworking industry of newcomers, but also lack of newcomers, even the old carpenters also left. <>

Second, the ideology of the younger generation, young people are yearning to work in the office with air conditioning, and they can get a high salary. They are naturally reluctant to engage in this kind of hard work, this kind of work is very tiring at the same time, the salary is not high, the young generation of ideological concepts and then change they are willing to take greater risks to obtain high-profit jobs, rather than take risks rather than do a down-to-earth work, and 12 years of compulsory education.

The knowledge level of the new generation has been improved, and the carpenters were forced to do the hard work because they were not educated, and they will definitely aspire to a better job rather than return to the old life. <>

Third, the work characteristics of carpentry carpentry work monotonous, hard work, poor working environment, although there are still many processes that can not be done by machines, so some carpentry work is also very high wages, but this requires carpenters to have superb technology.

However, new blood entering the industry is very rare, despite their skills, they can only be entry-level skills, rough workmanship, if you want to practice your own carpentry skills, you have to invest a lot of time, which requires us to have a strong willpower.

And the love of work, in the past, the driving force that urged carpenters to work hard was the pressure of life, but now that the standard of living has improved, without this pressure it needs willpower and love to support.

The hard work of carpentry and the young people who enter the carpentry industry can not endure the hardships and loneliness, which scares off many people who are really willing to be carpenters, and people in the city are too impetuous, which causes carpentry to become less and less.

The number of carpentry jobs is decreasing. Unlike in the past, as long as the furniture cabinets were made at home, they were basically done by carpenters on site, but now they are slowly being replaced by custom furniture. Not only that, but even the carpenter said that there was less and less work on the ceiling.

Instead, there is a loop of wire, which is not only low-cost, but also works well. For jobs on site that really require carpentry, I don't know what a carpenter needs to do, except for wall modeling and some chores.

It can be seen that the owners have done some modeling for the top, but they have mostly used plaster lines. Even if a few finished plaster carvings were made on top, the cost was much cheaper than the ceiling. Of course, from the point of view of effect, it is also very good.

The whole ceiling has a strong sense of hierarchy.

Not only is the top here like a wall, but many of the shapes are made with plaster wire. Even the columns here are decorated with plaster lines. Unlike in the past, when we work with the columns, we first let the carpenter lay out the shapes, and then decorate them with various high-grade materials, such as marble, hard bags, etc.

Although the effect is good, the cost is not low. The modeling of these plaster lines looks very simple, but it is undeniable that the effect is not bad at all.

Later, the carpenter said that it was because of this that we had less and less physical work, so a family could not earn much. But in any case, decorating with plaster threads is a good thing for the owners. At least the cost of renovation was controlled.

In fact, no matter how you do the carpentry work, it is indeed a good practice to decorate the top with plaster thread, which is also a popular practice nowadays. For example, during the renovation of my own home, there was no ceiling molding. I walked straight through the plaster line, and the effect was no worse than the ceiling.

So, when you're renovating, you can try. It looks simple, but the effect is absolutely wordless.

First, there are few people who learn. Carpentry has higher technical requirements and a longer learning cycle, so many young people are more likely to choose others, and it is difficult for carpentry masters to teach, so there are fewer people to teach and learn. Second, there is less and less life.

With the advancement of technology, many families have begun to customize all kinds of furniture, which is cheap and good-looking, selective, and relatively shorter, so that owners can choose more customization in order to save trouble. Third, change careers: many decoration carpenters changed their thinking, went to a lot of furniture factories, changed from decoration carpentry to furniture carpentry, and started to do employee carpentry.

Machines have evolved, why are there carpenters everywhere, of course, because there is no need for them, so there are not so many carpenters anymore, this is a matter of course.

Because now many carpentry jobs can be made by machines, which is not only fast, but also efficient. So there is less and less carpentry.

Because the current craftsmanship is automatic and mechanized, carpenters with craftsmanship have slowly become obsolete.

The development of China's furniture industry has roughly gone through such a stage: traditional carpentry - standard furniture brand - whole house custom furniture brand.

The advantages of woodworking customization are flexible and convenient, relatively cheap, but the disadvantages are obvious, the quality is not guaranteed, the after-sales service is poor, the environmental performance of the furniture is poor, the furniture style is obsolete and has a relatively large impact on the decoration time.

It is recommended that landlords choose custom furniture that is more popular now, for the following reasons:

**Aspect: Customized furniture because the various attribute parameters of furniture can be customized, that is, you can control the cost of furniture, such as a bookcase, you feel more expensive, you can remove some unnecessary plates, choose a steel shelf bookcase, less plates, naturally cheaper. In addition, if all the furniture is custom-made by choosing one brand, then the manufacturer can make reasonable use of materials in production, which is definitely cheaper than choosing multiple brands.

Custom-made furniture is not necessarily cheap, because there is no service guarantee, and the cost is relatively opaque.

Workmanship: The workmanship of woodworking is definitely not good, because it is basically manual work, and there are problems with the edge banding and smoothness of the board, which is not environmentally friendly and emits a large amount of formaldehyde. The choice of brand furniture, there are large-scale production bases, the edge banding of the board is absolutely guaranteed, and the environmental protection standards are basically E1 or even E0 standards.

It is very important to after-sales service, if there is a problem with the workmanship of the carpenter, it is difficult to find the responsible party, and the choice of brand furniture has a good after-sales guarantee.

Materials: The materials are usually man-made panels, but custom furniture can choose to customize solid wood furniture, which is better in terms of environmental protection and reducing the use of harmful materials. In order to control the cost of woodworking, the material must be very poor, many boards are either not hard, or the wood is very poor, and it is difficult for you to have a basis for consideration, and custom furniture brands are generally looking for a fixed business, so the material must be guaranteed.

In terms of style: the style of woodworking furniture is definitely limited, because the woodworking workshop is still in the form of individuals or engineering teams, and there are no professional designers and furniture design resources. The custom furniture brand because of the professional design, customization, and in the form of the company, in the design trend, as well as the design ability, some companies also have professional design software such as HPE customization, the furniture design services it provides must be diversified, there is greater room for choice, and can participate in the design, while woodworking furniture is not.

However, there can be no factory inventory for custom furniture, the production cycle is relatively long, the service process is relatively cumbersome, and the inability to stock means that large-scale production cannot be made, so the cost is relatively high.

Look at the materials used in the factory and the production environment of the factory, it is recommended to choose a large company to do customized products, the strength is in the area, the after-sales service is much better than that of a small company, and there is no need to worry about not giving the goods after receiving the payment. Spot products, to see its product inspection report, to see if there are any harmful to people or bad to the environment in the product, please adopt, I hope to help you!

There are very few detailed panels for furniture.

1.If the furniture is made of fine workboard, its surface layer should be pasted with a panel or a clear oil on the skin, and the uneven pattern and color of the panel are prone to aesthetic quality problems.

2.There are very few types of panels and veneers, and they are all fixed, and there is no innovation, and generally well-designed furniture will not be used.

3.The cost of making furniture from woodworking boards is sometimes higher than that of solid wood furniture. The reason is that the woodworking board is about 100 yuan, plus 70 yuan for the two-layer board, as well as auxiliary materials. The cost of materials is about 180, but a good-looking furniture MDF is about 130 at most.

4.It is not good to control the internal problems of the board, such as insects, enzymes, etc., 5The deformation of the woodworking board is also difficult to control.