Why does a solid wood home have a gap, is it a precursor to the bad use of furniture?

No, the reason why solid wood has gaps: even if solid wood is made into furniture, there is still a little bit of original wood water-based, solid wood furniture has a principle of thermal expansion and contraction, when it is hot, furniture is easy to expand, leaving seams can better protect the damage of furniture, prolong the service life.

This gap is called an expansion joint or shrinkage joint, and it is not caused by a mistake in the design and manufacture of the furniture. On the contrary, expansion joints are intentional. Its existence has played a huge role in curbing the physical characteristics of wood swelling and shrinkage and improving the service life of solid wood furniture.

Not a bad precursor.

I don't think this is a precursor to the bad use of solid wood furniture, because in many cases, solid wood furniture will suffer a certain amount of wear and tear, and at this time we have to find a way to repair these wear and tear, these are just the wear and tear of solid wood furniture.

The reason why solid wood furniture will crack is because the moisture content is not well controlled during the production process, which can be said to be a quality problem. If the moisture content of the plate is controlled and balanced, there will basically be no cracking, deformation and other problems when used in the later stage. For cracks, the repair of solid wood furniture without cracking is simple, use 502 glue to drip along the cracks, wait until dry, and gently scrape off the excess glue with a blade.

Mix sawdust powder with 502 glue, fill the cracks, dry thoroughly and sand with sandpaper and repaint.

If the paint is not dry, resulting in cracking of the wood, directly repair the paint, if there is too much force or heavy caused by the change of employment must be found to change the job to replace, in case of safety accidents. This is a treatment to reduce cracking in solid wood furniture. However, the moisture content of some solid wood boards is not well controlled in the production process, and the drying treatment technology is not up to standard, and the moisture content of the wood is too high, so the probability of cracking is greater.

However, if it is cracked, the slight cracking can be simply dealt with This kind of problem is usually dealt with by the business, because there is a master who specializes in the beauty of this furniture, the master will generally polish the crack first, fill the gap with sawdust, and then paint, basically the same color as the original furniture, sandpaper grinding pour 502 pouring and grinding, if it is serious, it is best to call a carpenter master to repair, so that it will not affect the appearance much.

You don't have to question whether the product is too poor immediately, because of the influence of the weather temperature, there is a natural expansion and contraction of solid wood furniture, because of the mortise and tenon structure, long-term expansion and contraction is inevitable This problem will occur. I have answered a similar question before, that is, the air environment at home is too dry, resulting in too much water loss and cracks in solid wood furniture, and there are many reasons why the air is too dry, such as long-term ventilation without opening the window, and the north will be very dry.

Solid wood furniture should be avoided from direct sunlight for a long time, and long-term exposure to the sun will easily cause cracking of solid wood furniture, so solid wood furniture should be avoided by the window.

If it is a very fine crack, use 502 glue to drip along the crack, and then use a blade to gently scrape off the excess glue. Boil the old books and newspapers cut into crumbs, add an appropriate amount of alum, and water to make a paste, carefully embed them in the cracks, and polish them with sandpaper after solidification.

The reasons for the cracks in solid wood furniture are:1The reason for the production process may be that the moisture content of solid wood panels is not well controlled in the production process, and the drying treatment technology is not up to standard, and the moisture content of the wood is too high to cause the furniture to crack; 2.

Climatic reasons, external environmental factors will also lead to cracking of solid wood furniture, too cold or too hot, it is easy to complete cracking; 3.Improper use can also lead to cracking, such as placing solid wood furniture in a sunny place, or wiping solid wood furniture with a wet towel frequently. How to deal with the problem of open seams:

1.Surface cracks, you can use fine sandpaper to polish around the cracks, and the fine powder that has been polished can be collected and filled in the cracks and sealed with glue; 2.Internal cracks, you can take the same kind of wood saw, pay attention to the very fine kind, fill the cracks with 502 glue, fill them flat, you can put on some wood wax oil, but if the cracks are particularly large, it is recommended that it is best to find a professional furniture repairer to deal with it.

Solid wood furniture is cracked because the environment is dry, the moisture in the wood is lost, and it is air-dried. So it causes cracking. For the cracking phenomenon, we can try to cut some old newspapers, add an appropriate amount of alum to stir, add some water and stir evenly, and finally pour it into a container and cook it into a paste, and pour the paste into the cracked place to dry naturally.

1. Wood quality: most of the furniture is made of different wood, if the wood quality of the furniture is not good, in the process of processing, when the water content inside is relatively large, it is easy to have cracks in the furniture, and the cracks need to be repaired in time and placed in an astigmatism environment to balance the water content of the furniture.

2. Caused by climate: If the furniture is exposed to the sun in summer, or placed in a humid environment for a longer time, there will be cracks in the furniture, it is best to place the furniture in a cool and dry environment, and regularly use alcohol to change and wipe the surface of the furniture with tea, so as to avoid the cracks in the furniture.

3. Transportation damage: usually when transporting furniture, it is inevitable that there will be bumps and bumps, which is also the reason for furniture cracks, if the furniture just bought cracks, you can return it in time, if in the process of moving, the cracks can be repaired with paste, wood powder, glue to repair the tomb, you must be cautious when transporting furniture.

The above is an introduction to what is the cause of cracks in the home, so there are many reasons for the cracks in the furniture, we usually pay attention to the maintenance of the furniture, I hope the above content ruler hand is useful to you.

The shrinkage joints of solid wood furniture are generally left after the edge, which is mainly reflected in the more panels, especially the tabletop.

Because the desktop board is afraid that the corners are easy to scratch people and the needs of beauty, it will generally make streamlined shape edge strips, which are not only beautiful, but also play a decorative role, and can effectively prevent accidental injury.

There is one of the main reasons why the desktop is often exposed to heat; cold; Water, in short, the environment is unstable, solid wood is afraid of these factors to cause bagging, cracking, etc., if there is no gap around the board to expand and shrink the space, the countertop will be deformed. This seam plays this role, which is said to have existed when Luban was there, but it is not as systematic as it is now.

What's going on with cracking solid wood furnitureThe moisture content of solid wood

The most basic reason for the cracking of solid wood furniture is that the moisture content of the wood is not well controlled in the production process, which can be said to be a product quality problem, and the moisture content of the key furniture board is manipulated and balanced, and it is generally not easy to crack and deform in the middle and later stages.

climatic reasons

The climate is different, the moisture content of the solid wood board is also different, which is related to the difference in natural geography, the moisture content of the solid wood board in Beijing is generally up and down, and the moisture content of its furniture is in4%;In the south, the moisture content of wood is higher, at 14%. Therefore, after the application of solid wood furniture in the southern region and the northern region, cracking will occur.

Improper use

Solid wood furniture is also prone to cracking, deformation and other conditions if it is not used properly, I don't know if you have noticed, furniture placed by the window, furniture that is often cleaned with wet cotton towels and moved furniture casually, are more prone to problems.

Shipping is damaged

If there is a bump or a very big change in the climate during transportation, the cracking of solid wood furniture is also more extensive.

How to solve the problem of cracking of solid wood furnitureSmall crack remediation

If there are only some tiny cracks on the surface of solid wood furniture, you can make up for it with 502 super glue in time, and then scrape off the unnecessary super glue without hurting the paint surface.

If it is a fine seam, the solution will be more complicated, you can mix second-hand books and newspapers, Ming Gong and water to boil into a viscous, put it in the crevice, and wait for condensation; You can also use wood residue reinforcing glue to stir evenly, and then put it into the gap, and then polish it with sandpaper after drying.

Avoid cracking

In order to better prevent the occurrence of cracking and other conditions of solid wood furniture, it is necessary to pay attention to tiptoeing as much as possible when purchasing and transporting, and the posture does not have to be very large when applying; It is necessary to wax and varnish on time, and when touching stains, scrub along the lines with a soft rag to prevent the use of organic chemical cleaning liquid, which can easily lead to cracking of the car paint; It is also necessary to avoid pyrogens and pay attention to sun exposure, otherwise the paint will fade and endanger the service life.

Take good care of it

Do a good job of maintenance can also avoid the problem of cracking solid wood furniture, maintenance to do three three-sided work, one is dusting, you can use a neat soft cotton cloth to dry the water and scrub; The second is cleaning, using a special furniture cleaning liquid to remove kitchen fumes and dirt; The third is waxing, solid wood furniture should be waxed on time, preferably once a quarter, and should be cleaned up with soft soap before waxing.

You can ask a professional person to come to your home to solve the problem, and you should go to a professional worker to solve it.

Alum can be used for repair, which is very good, and it does not affect the aesthetics, and the cost is relatively low.

Once such a situation occurs, you can replace it with new furniture in time, and then you can also choose professional tools to solve the crack problem, you can choose glue, usually when wiping furniture, you must choose a towel with good flexibility, do not come into contact with water.

Tip 1: Small crack remediation.

If there are only some microcracks on the surface of solid wood furniture, you can directly fill it with 502 glue, and then scrape off the excess glue to not hurt the paint surface.

If it is a small crack, the treatment will be more complicated, you can mix old books and newspapers, alum and water and boil it into a paste, embed it in the crack, and wait for it to solidify; You can also use sawdust and glue to stir evenly, then embed in the cracks, and sandpaper can be sanded after drying.

Tip 2: Avoid cracking.

In order to avoid cracking and other phenomena of solid wood furniture, it is necessary to pay attention to light hands and feet when purchasing and handling, try to be as stable as possible, and do not move too much when using; It is necessary to wax and varnish regularly, and when it is dirty, use a soft cloth to wipe along the texture to avoid using chemical cleaners, which is easy to cause cracking of the paint surface; Also keep away from heat sources and pay attention to sun exposure, otherwise the paint will fade and affect the service life.

Solid wood furniture is a preferred material when choosing furniture in recent years, whether it is a sofa or a cabinet or a bed in the home, they prefer to buy solid wood, because solid wood furniture is very durable, but also very good-looking, can instantly improve the sense of hierarchy in the home. However, solid wood furniture needs to be maintained frequently, and if it is not used properly, or often in a very dry place, it is prone to cracking. Cracking of solid wood furniture will greatly affect the appearance, so in such a situation, you can find a way to repair it.

If the solid wood furniture in the home is cracked, there will definitely be some cracks, and if it is not dealt with in time, the cracks will definitely get bigger and bigger, and the aesthetics of the solid wood furniture will also be affected. In fact, at this time, you can find some unused books or old newspapers at home, cut the paper into scraps, and then add some migrant workers to it, and then add some water to boil it into a paste. Then put these pastes into the cracks of some furniture, and after the glue is dry, the solid wood furniture will become very strong.

Most of the solid wood furniture has the same touch, but in fact, the color is also different, some are off-white, and some are jujube red. If there are cracks or scratches on wooden furniture, you can actually go to a stationery store and buy a pen of a similar color to paint. This will cover up the cracks and prevent the background color of the wood from being exposed, and apply a clear layer of nail polish to the top after painting.

There is also a more practical method, that is, to find some sawdust and white glue to come over, fully stir these two things, fill the things after the feet are mixed into the cracks, and wait for the glue and sawdust to dry completely, and then find a sandpaper to polish and polish, this method is also very economical and practical, is a kind of often used. If it is light-colored furniture, you can use candles to repair, but before repairing, you should first scrape the candle into powder, and then evenly coat it, and then dispose of the excess after the hot powder is completely cooled, so the crack is not obvious.

The reasons for solid wood furniture are: the paint is not dry well, resulting in wood cracking, too much force or heavy causes, the substrate is unqualified to dry, the moisture content is too high, resulting in wood deformation and cracking, etc. You can use fine sandpaper to sand around the cracks.

The fine powder that has been polished is collected and filled in the crack and sealed with glue.