Can oak furniture be maintained without priming and directly with wood wax oil?

No, because oak is very fragile, painting him is to protect him, if you don't paint it and use wood wax oil to maintain it, then wood wax oil will also hurt the oak.

No, because everything has a first-come, first-served approach, and you can't mess up the order, because messing up the order will make what you do seem redundant.

No, there are certain rules for using wood wax oil, and it cannot be used directly, and there is also a procedure in the middle.

Actually, it is possible, but this kind of maintenance may not be particularly effective.

Thank you for your patience, dear! Wood wax oil is the common name of vegetable oil wax paint in China, is a kind of natural wood coating similar to paint and different from paint, it is completely different from the paint produced based on petrochemical synthetic resin, the raw materials are mainly refined linseed oil, carnauba wax and other natural vegetable oils and vegetable wax and with some other natural ingredients fused together, even the pigment used in color mixing has reached the food grade. Therefore, it does not contain toxic ingredients such as triphenyl, formaldehyde and heavy metals, has no pungent odor, and can be used as a substitute for paint for home decoration and outdoor garden wood.

If it is solid wood furniture, it can be used, if it is veneer, it is not recommended that you use wood wax oil, because it violates the two foundations of using wood wax oil, first of all, because the wood veneer is pasted on the wood board with glue, the environmental protection of the glue is debatable, and secondly, the wood wax oil brush on the wood veneer protects and nourishes the wood bark rather than the wood board, because the change of humidity and temperature The wood board still has to be deformed and cracked. Hope it helps!

You can bai and prepare.

The waxed wood is thoroughly sanded before waxing and coated with a layer of diluted insect paint as a primer, back.

When the primer is completely dry, you can use 0000 steel wool to polish along the wood grain and then clean the furniture thoroughly with a cloth.

A thin layer of solid wax can be applied to the wood with a clean cloth pad of velvet, and a thin, uniform layer of wax is applied when waxing. Apply wax only in a small area at a time.

It is advisable to use a damp rather than a damp cloth pad, and if using water, to ensure that the surface of the furniture is dry before polishing it, the wax should be completely dry. Then use a clean cloth and vigorously wipe the wax layer to wipe off the excess wax. When the wax layer is homogeneous, polish it with a clean cloth.

Waxing is possible, and here are the steps.

Before using the glaze and wax of the furniture, check the lacquer plate.

Whether the surface is intact.

For the newer wood furniture, the surface dust should be wiped off with a muslin cloth, and the stains that have been left for too long or are difficult to remove can be wiped with a cotton cloth dipped in a small amount of gasoline or sprinkled with semen. Then use a small piece of cotton cloth dipped in an appropriate amount of varnishing wax to coat a large area, and then use a larger dry cloth to rub the wax evenly according to the circumferential block, so as not to leave streaks and markings, affecting the luster, After a long time, it will also soften the paint layer and is not easy to remove. In view of the fact that there are many varieties of glazing wax on the market, it is important not to change the glazing wax varieties selected frequently, so that it is easy to grasp their characteristics.

Where the paint layer has been damaged, it should be treated before waxing. If the area scorched by cigarettes is limited to the surface paint, you can use fine water sandpaper dipped in water and gently grind away the stain, and then apply wax. If the surface is scratched but not deep into the wood, it can be directly polished with polishing wax.

Shoe polishes of similar colors can do the same. For the white circle marks left by the hot teacup on the lacquer layer, you can use a cloth to rub it. If the marks are not removed, soak a cotton cloth in warm water, wring it out, add a few drops of ammonia to rub it, and finally polish it with polishing wax.

Hello, mahogany can be polished directly, and other solid wood wax directly, it seems that there is no such process, and it is generally waxed on the paint! Back to 1, first look at the selection of the wardrobe. Professional manufacturers choose environmentally friendly plates that meet national testing standards, while some manufacturers choose inferior plates that have no test reports and pose a potential threat to human health.

Therefore, to buy a wardrobe, the first thing to see is whether the merchant has a plate test report and related test certificates from the national authoritative testing department. 2. Look at the veneer of the plate. Some wardrobes look good on the surface, but in fact, a slight scratch with a fingernail can make obvious scratches.

These wardrobes are made of polyflor paper and gorgeous cardboard that are often used in low-cost wardrobes on the market, and the wear resistance is poor. Professional manufacturers use environmentally friendly veneers with thick dip paint thickness and high temperature and high pressure treatment, with high surface strength, wear resistance and scratch resistance. 3. Look at the edge banding of the plate.

Professional manufacturers use precision panel saws to cut plates, and there is no edge collapse around the plates. After the edge is banded around the perimeter, it effectively prevents moisture in the air from invading the inside of the board. Some manufacturers do not have professional equipment, the cutting is rough, and there are obvious edge collapse around it.

Some even cut corners and only did edge sealing on the front side of the plate. The non-edged surface is easy to absorb moisture in the air, causing the board to expand, causing the wardrobe to deform and affecting the service life. 4. Look at the processing method.

5. Look at the structure of the back plate. 6. See if it is customized for professional home furnishings. 7. Look at hardware accessories.

Insulting the country's neighbors.

1. Paraffin oil is not used for the maintenance of mahogany furniture.

2. The protection of mahogany furniture is generally protected by oil, and the most common is to use walnut oil to protect the surface of the furniture, not liquid paraffin oil.

3. For hardwood furniture, especially mahogany furniture, the air should be kept at a good humidity and adjusted to an appropriate temperature. With a humidifier, it is safest to control the internal temperature within a certain range. If the ground is low, the furniture legs must be properly raised if the ground is wet, otherwise the legs of the legs are easily corroded by moisture.

Moreover, avoid placing too heavy items on the surface of the furniture for a long time, especially TVs, fish tanks, etc., which will deform the furniture. The table should not be covered with non-breathable materials such as plastic sheeting.