What accessories do you need to buy for the installation of Fotile gas stoves?

Gas bellows or hoses will be used for gas stove commissioning, which can be prepared by a door-to-door technician or by yourself.

In addition, before commissioning, it is also necessary to pay attention to: 1. Determine whether the user's gas source and gas supply pressure in front of the stove are consistent with the nameplate of the stove;

2. It should be installed in a non-residential room, and a range hood should be installed above the stove, and the specified fire spacing should be strictly enforced;

3. A special hose approved by the gas company must be used.

4. If liquefied petroleum gas is used, the pressure reducing valve must meet the national standard and pass the test;

<> Fotile gas stove installation requires the following accessories: self-ordering.

Gas pipeline: Fotile gas stoves need to be connected to gas pipes, so you need to purchase gas pipes that match your local gas pipeline.

Air source connector: Fotile gas stove needs to use air source connector to connect the gas pipeline with the gas stove, and it is necessary to purchase a gas source connector that meets the specifications.

Wire rope: In order to ensure the stability of the gas stove, it is necessary to use a wire rope to fix the gas stove on the wall or countertop.

Gas hob bracket: If you choose to mount the Fotile gas hob on the countertop, you will need to purchase a bracket to support the gas hob.

Wind deflector: The deflector can guide the flue gas to the flue gas and avoid the overflow of the flue gas, so it is necessary to purchase a wind deflector that meets the specifications.

Please note that before installing a Fotile gas stove, it is recommended that you consult your local gas company or professional installer to ensure your safety and the normal use of the equipment.

<> The first step of installing Fangtai gas stove is to put it into the hole according to the opening, and then one side of the pipe is connected to the air inlet of the stove, and the other side is linked to the air outlet, both sides of the gas outlet can be clamped with clips.

1. How to change the valve core of Fangtai gas stove.

It is not difficult to replace the solenoid valve of the Fotile gas stove, as long as the plug plug plugged into the solenoid valve is removed, and then the two bolts that fix the solenoid valve are unscrewed, and they can be removed. But when installing a new solenoid valve, don't forget to install a leather pad. However, if the user is not at ease to replace it by himself and is worried about a safety accident, it is best to ask a professional master to come to replace it.

Second, Fotile gas stove can not catch fire.

1) After turning off the stove switch, check whether the front valve and the entrance switch of the gas stove are open, if not, try to fire again after opening an account.

2) Check whether there are sparks coming out when the stove is ignited, if not, replace the battery; If there is a spark, proceed to the next step.

3) The air inlet and nozzle of the pressure regulator are blocked by rust, which hinders the gas flow out of the bottle, and the qualified pressure regulator is replaced.

4) The fire hole of the burner fire cover is blocked by dirt, which hinders the flow out of the gas of the burner mixing pin and cleans the dirt of the fire hole.

5) The nozzle is blocked, unscrew the nozzle to clean it up.

6) If there is a little fire, and the spark can hit the stove fire cover, in this case, it is best for the user not to carry out maintenance operations, and to report to the gas stove manufacturer for after-sales maintenance.

3. Precautions for the use of Fotile gas stoves.

1. The gas source used should be consistent with that indicated on the gas stove.

2. Avoid covering the flame with a barrier plate and do not place flammable products around the gas stove.

3. The gas stove should be installed in a well-ventilated place, but not in a place where strong wind blows directly in.

4. If you find that the gas leakage is high, you should immediately turn off the gas switch, open the doors and windows for ventilation, do not turn on the ignition of electrical appliances, and plug and unplug the power plug.

5. Do not touch the stove with your hands during use or when the fire has just been turned off. Grate. stove top, etc., to avoid burns.

6. PVC pipe can not be used for connection with gas pipe, because it will melt when heated, so it should use a hose with oil resistance, if there is a crack or the interface is easy to loosen, it will lead to air leakage, do not use it, it should be replaced immediately, and it is strictly forbidden to pass the hose through or touch the cooktop when Anji silver.

7. When the fire is adjusted to the small fire, there is no open flame in the outer ring fire hole or the interval of ten seconds can be adjusted to the high fire to prevent the backfire, with the damage to the panel and other components.

8. Whether flammable products are stacked around the gas stove.

9. Check whether there is gas leakage in the gas stove pipe and deal with it in time, apply it to the connections of the gas pipe with a brush dipped in hot soapy water, if there are bubbles found, it is a leakage part, and it must be replaced immediately or repaired by the maintenance department of the branch.

10. Whether to maintain good ventilation around the gas stove.

11. Check whether the flame is normal or abnormal sound during use.

12. Clean up the inside regularly. Outer ring tooth cover. Nozzles and burner mother-fire holes to prevent dirt from blocking the aperture, do not damage the aperture when cleaning.

13. To maintain the daily cleaning of the gas stove, you can wipe it with wet patch, and then wipe it with a dry cotton cloth, and it is forbidden to use strong detergent or gasoline for cleaning.